Commission Implementing Regulation (EU) 2023/2088 of 28 September 2023 approving reaction mass of N,N-didecyl-N-(2-hydroxyethyl)-N-methylammonium propionate and N,N-didecyl-N-(2-(2-hydroxyethoxy)ethyl)-N-methylammonium propionate and N,N-didecyl-N-(2-(2-(2-hydroxyethoxy)ethoxy)ethyl)-N-methylammonium propionate as an active substance for use in biocidal products of product-type 8 in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (Text with EEA relevance)
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Reaction mass of N,N-didecyl-N-(2-hydroxyethyl)-N-methylammonium propionate and N,N-didecyl-N-(2-(2-hydroxyethoxy)ethyl)-N-methylammonium propionate and N,N-didecyl-N-(2-(2-(2-hydroxyethoxy)ethoxy)ethyl)-N-methylammonium propionate is approved as an active substance for use in biocidal products of product-type 8, subject to the conditions set out in the Annex.
Implementing Regulation (EU) 2016/1093 is repealed.
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .
ANNEX Common Name IUPAC Name Identification Numbers Minimum degree of purity of the active substance ( 1 ) Date of approval Expiry date of approval Product type Specific conditions reaction mass of N,N-didecyl-N-(2-hydroxyethyl)-N-methylammonium propionate and N,N-didecyl-N-(2-(2-hydroxyethoxy)ethyl)-N-methylammonium propionate and N,N-didecyl-N-(2-(2-(2-hydroxyethoxy)ethoxy)ethyl)-N-methylammonium propionate (‘DMPAP’) reaction mass of N,N-didecyl-N-(2-hydroxyethyl)-N-methylammonium propionate and N,N-didecyl-N-(2-(2-hydroxyethoxy)ethyl)-N-methylammonium propionate and N,N-didecyl-N-(2-(2-(2-hydroxyethoxy)ethoxy)ethyl)-N-methylammonium propionate EC No: - CAS No: - 86,1 % w/w dry weight 1 January 2018 31 December 2027 8 The authorisation of biocidal products is subject to the following conditions: (a) the product assessment pays particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union-level risk assessment of the active substance; (b) the product assessment pays particular attention to: (i) industrial and professional users; (ii) groundwater for wood in service that will be exposed to frequent weathering; (c) labels and, where provided, safety data sheets of products authorised indicate that industrial or professional application is conducted within a contained area or on impermeable hard standing with bunding, and that freshly treated timber is stored after treatment under shelter or on impermeable hard standing, or both, to prevent direct losses to soil or water, and that any losses from the application of the product are collected for reuse or disposal. ( 1 ) The purity indicated in this column was the minimum degree of purity of the active substance evaluated. The active substance in the product placed on the market can be of equal or different purity if it has been proven to be technically equivalent to the evaluated active substance.
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.