ANNEX VIISupplementary provisions
ANNEX VII Format for the list of engines referred to in Article 37(1) of Regulation (EU) 2016/1628 1.1. Make(s) (trade name(s) of manufacturer): … 1.2. Commercial name(s) (if applicable): … 1.3. Company name and address of manufacturer: … 1.4. Name and address of manufacturer's authorised representative (if any): … 1.5. Name(s) and address(es) of assembly/manufacture plant(s): … 1.7. List number ( 0 ): … 1.7.1 Reason for list submission ( 1 ): Yearly/Stage V/TAA ( 2 ) 1.7.2 List period start date (dd/mm/yyyy): … 1.7.3 List period end date (dd/mm/yyyy): … Engine family designation / Engine type designation ( 3 ) Category and sub category ( 4 ) Number of engines produced during list period Engine identification number ( 5 ) Month and year of cease of production (mm/yyyy) ( 6 ) First engine Last engine Engine family 1 Type 1 Type … Type i Engine family … Type 1 Type … Type j Engine family n Type 1 Type … Type k Explanatory notes to Annex VII: (Footnote markers, footnotes and explanatory notes not to be stated on the list of engines produced in accordance with the EU type-approvals granted) ( 0 ) Use the following code: yyyy/nn Where yyyy is the year of production of the list and nn is the sequential number of the lists presented during that year. ( 1 ) Indicate one of the following codes: Yearly for lists submitted within 45 days following the end of each calendar year; Stage V for lists submitted immediately after each of the dates for the placing on the market of engines referred to in Annex III to Regulation (EU) 2016/1628; TAA for lists submitted any other date that the approval authority may stipulate. ( 2 ) Strike out the unused options, or only show the used option(s). ( 3 ) Indicate the engine type designation /engine family designation in accordance with entries 1.6 and 3.1.1 of the information document set out in Appendix 3 to Annex I. ( 4 ) Indicate the applicable option for the category and sub-category in accordance with entry 1.7 of the information document set out in Part A of Appendix 3 to Annex I. ( 5 ) Only applicable when the correlation of the engine identification number to the corresponding engine types and, where applicable, engine families and to the EU type-approval numbers is not identified by the engine coding system (engine type designation/ engine family designation). ( 6 ) Only applicable when the manufacturer ceases to produce an approved engine type or engine family; in this case, indicate the month and year of production of the last engine.