Council Regulation (EU) 2023/1190 of 16 June 2023 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products

ANNEX
ANNEX
The Annex to Regulation (EU) 2021/2278 is amended as follows:
(1)
the entries with the following serial numbers are deleted: 0.2425, 0.3140, 0.3966, 0.4030, 0.4140, 0.4305, 0.4609, 0.4733, 0.4893, 0.5018, 0.5187, 0.5788, 0.6629, 0.6654, 0.6689, 0.6781, 0.7489, 0.7972, 0.8111, 0.8112, 0.8140 and 0.8311;
(2)
the following entries replace those entries that have the same serial numbers:
Serial Number
CN code
TARIC
Description
Rate of autonomous duty
Supplementary Unit
Date envisaged for mandatory review
‘0.3227
2846 90 30
2846 90 40
2846 90 50
2846 90 60
2846 90 70
2846 90 90
Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 00
0  %
-
31.12.2023
0.7389
ex 2914 29 00
55
1-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) with a purity by weight of more than 90 %
0  %
-
31.12.2024
0.7722
ex 2919 90 00
55
Reaction products of phosphoryl trichloride and 2-methyloxirane (CAS RN 1244733-77-4)
0  %
-
31.12.2024
0.4058
ex 3204 20 00
10
Colourant C.I. Fluorescent Brightener 184 (CAS RN 7128-64-5) and preparations based thereon with a colourant C.I. Fluorescent Brightener 184 content of 20 % or more by weight
0  %
-
31.12.2026
0.4922
ex 3601 00 00
20
Pyrotechnical mixture in cylindrical shape or granulate form, composed of strontium nitrate or copper nitrate or basic copper nitrate in a matrix of nitroguanidine or guanidine nitrate, also containing a binder and additives, used as a component of airbag inflators  ( 1 )
0  %
-
31.12.2026
0.4410
ex 3903 90 90
86
Mixture containing by weight:
—
45 % or more but not more than 65 % of polymers of styrene,
—
30 % or more but not more than 45 % of poly(phenylene ether), and
—
not more than 11 % of additives
0  %
-
31.12.2023
0.6351
ex 3907 29 20
50
Poly( p -phenylene oxide) in the form of powder with:
—
a glass-transition temperature of 210 °C or more,
—
a weight average molecular weight (Mw) of 35 000 or more but not more than 80 000 ,
—
an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram
0  %
-
31.12.2024
0.5506
ex 3920 51 00
30
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 125 μm
0  %
-
31.12.2023
0.8438
ex 3920 62 19
28
Non-transparent film of poly(ethylene terephthalate) or poly(vinyl difluoride):
—
each outer layer with a thickness of 7 μm or more but not more than 80 μm,
—
with a tensile strength of 300 N/cm 2 or more (ASTM D-882),
—
with a total thickness of 200 μm or more but not more than 350 μm, and
—
with a width of 600 mm or more but not more than 1 600 mm,
—
covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites
0  %
-
31.12.2027
0.7056
ex 7019 61 00
ex 7019 63 00
70
30
E-fibre glass fabrics:
—
having a weight of 20 g/m 2 or more, but not more than 214 g/m 2 ,
—
surface treated with an organosilane coupling agent,
—
in rolls,
—
having a humidity content by weight of 0,13 % or less, and
—
having not more than 3 hollow fibres out of 100 000 fibres,
for the exclusive use in the manufacture of prepregs and copper clad laminates  ( 1 )
0  %
m 2
31.12.2026
0.8300
ex 8408 90 65
ex 8408 90 67
ex 8408 90 81
20
20
20
Compression-ignition internal combustion piston engines:
—
of the inline type,
—
with a cylinder capacity of 7 000 cm 3 or more but not more than 18 100 cm 3 ,
—
with a power of 205 kW or more but not more than 597 kW,
—
with an exhaust after-treatment module,
—
with external width/height/depth dimensions of not more than 1 310 /1 300 /1 040 mm or 2 005 /1 505 /1 300 mm or 2 005 /1 505 /1 800 mm,
for use in the manufacture of crushing, screening, separation or compost turning machines  ( 1 )
0  %
-
31.12.2026
0.6627
ex 8501 10 99
75
Permanently excited DC motor with
—
a multiple-phase winding,
—
an external diameter of 24 mm or more but not more than 38 mm,
—
a rated speed of not more than 12 000 rpm,
—
a power supply voltage of 8 V or more but not more than 27 V,
—
with or without a pulley,
—
with or without a gear wheel
0  %
-
31.12.2025
0.2838
ex 8501 10 99
79
DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least – 20 °C to + 70 °C
0  %
-
31.12.2023
0.7789
ex 8505 19 10
20
Arc segments of permanent magnets of agglomerated ferrite, with:
—
a length of 16,8 mm or more, but not more than 110,2 mm,
—
a width of 14,8 mm or more, but not more than 75,2 mm,
—
a thickness of 4,8 mm or more, but not more than 13,2 mm,
for use in the manufacture of electromotor rotors  ( 1 )
0  %
-
31.12.2024
0.6703
ex 8507 60 00
33
Lithium-ion accumulator, with:
—
a length of 150 mm or more, but not more than 1 310 mm,
—
a width of 100 mm or more, but not more than 1 000 mm,
—
a height of 200 mm or more, but not more than 1 500 mm,
—
a weight of 75 kg or more, but not more than 200 kg,
—
a nominal capacity not less than 58 Ah and not more than 500 Ah,
—
a nominal output voltage of 230V AC (line to neutral) or a nominal voltage of 50V (± 10 %)
1,3  %
-
31.12.2023
0.7796
ex 8536 49 00
60
Relay in the shape of a cube with:
—
a coil operating voltage of 12 VDC (Voltage Direct Current) or more, but not more than 24 VDC (Voltage Direct Current),
—
a contact current carrying capacity of 5A or more, but not more than 15A,
—
a contact voltage of 80 VAC (Voltage Alternating Current) or more, but not more than 270 VAC (Voltage Alternating Current),
—
outer dimensions of 19 mm (± 0,4 mm) x 15,2 mm (± 0,4 mm) x 15,5 mm (± 0,4 mm),
for use in the production of control board of household appliances  ( 1 )
0  %
-
31.12.2024
0.4616
ex 8536 69 90
83
AC socket with a noise filter, composed of:
—
AC socket (for power cord connection) of 230 V,
—
integrated noise filter composed of capacitors and inductors,
—
cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,
whether or not equipped with a metal support, which joins the AC socket to the PDP TV set
0  %
p/st
31.12.2024
0.6507
ex 8537 10 98
50
Electronic control unit BCM (Body Control Module) or IBM (Integrated Body Control Module) or similar:
—
comprising at least a plastic box with printed circuit board, with operating direct voltage of 9 V or more, but not more than 16 V,
—
whether or not with metal holder,
—
able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,
of a kind used in the manufacture of goods of Chapter 87
0  %
p/st
31.12.2024
0.7409
ex 8540 91 00
20
Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), with electric connectors
—
with or without a metal housing,
—
with or without a graphite carbon shield mounted in a mini-Vogel type system,
—
with or without separate pyrolytic carbon blocks used as heating elements, and
—
a cathode temperature of less than 1 800 K at a filament current of 1,26 A
0  %
-
31.12.2027
0.2434
ex 8548 00 90
44
Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing
0  %
p/st
31.12.2023
0.8279
ex 8708 40 20
80
Transmission gearbox without torque converter, with:
—
dual clutch,
—
7 or more forward gears,
—
1 reverse gear,
—
a maximum torque of 390 Nm,
—
whether or not with electric motor integrated,
—
a height of 400 mm or more but not more than 600 mm,
—
a width 350 mm or more but not more than 600 mm, and
—
a weight of 70 kg or more but not more than 110 kg,
for use in the manufacture of motor vehicles of Heading 8703  ( 1 )
0  %
p/st
31.12.2026
0.7710
ex 8714 99 50
ex 8714 99 50
11
91
Derailleur gears, consisting of:
—
rear derailleur and mounting articles,
—
with or without front derailleur,
for use in the manufacture of bicycles (including electric bicycles)  ( 1 )
0  %
p/st
31.12.2024
0.7708
ex 8714 99 90
40
Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles)  ( 1 )
0  %
p/st
31.12.2024
0.7973
ex 9002 11 00
23
Lens with:
—
motorized focus, zoom, aperture,
—
electronically switchable infrared cut filter,
—
an adjustable focal length not less than 2,7 mm and not more than 55mm,
—
a weight of not more than 120 g,
—
a length of less than 70 mm,
—
a diameter of not more than 70 mm
0  %
-
31.12.2025
(3)
the following entries are inserted according to the numerical order of the CN and TARIC codes in the second and third columns:
Serial Number
CN code
TARIC
Description
Rate of autonomous duty
Supplementary Unit
Date envisaged for mandatory review
‘0.8448
ex 2835 10 00
40
Calcium phosphinate (CAS RN 7789-79-9) with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8520
ex 2840 20 90
20
Barium borate (CAS RN 13701-59-2) with a purity by weight of 99 % or more
0  %
-
31.12.2027
0.8492
ex 2903 99 80
18
1-Fluoronaphthalene (CAS RN 321-38-0) with a purity by weight of 99 % or more
0  %
-
31.12.2027
0.8482
ex 2907 29 00
13
4,4'-Methylenedi-2,6-xylenol (CAS RN 5384-21-4) with a purity by weight of 98,5 % or more
0  %
-
31.12.2027
0.8495
ex 2915 90 30
20
Chloromethyl dodecanoate (CAS RN 61413-67-0) with a purity by weight of 97 % or more
0  %
-
31.12.2027
0.8457
ex 2915 90 70
53
3-Chloro-2,2-dimethylpropanoyl chloride (CAS RN 4300-97-4) with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8489
ex 2916 39 90
40
Ethyl 4-bromo-3-(bromomethyl)benzoate (CAS RN 347852-72-6) with a purity by weight of 97 % or more
0  %
-
31.12.2027
0.8509
ex 2918 19 98
25
( S )-2-Hydroxy-2-phenylacetic acid (CAS RN 17199-29-0) with a purity by weight of 99 % or more
0  %
-
31.12.2027
0.8511
ex 2920 90 10
85
Diethyl carbonate (CAS RN 105-58-8) with a purity by weight of 99,9 % or more
3,2  %
-
31.12.2023
0.8490
ex 2920 90 70
70
4,4,5,5-Tetramethyl-1,3,2-dioxaborolane (CAS RN 25015-63-8) with a purity by weight of 97 % or more, containing not more than 1 % of the stabiliser triethylamine (CAS RN 121-44-8)
0  %
-
31.12.2027
0.8477
ex 2921 19 99
35
N -Ethyl- N -isopropylpropan-2-amine 2-(difluoromethoxy)acetate with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8473
ex 2922 50 00
45
( S )-2-Amino-2-(3-fluoro-5-methoxyphenyl)ethanol hydrochloride (CAS RN 2095692-22-9) with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8462
ex 2926 90 70
31
Lambda-cyhalothrin (ISO) (CAS RN 91465-08-6) with a purity by weight of 97 % or more
0  %
-
31.12.2027
0.8474
ex 2928 00 90
53
Ethyl chloro[(4-methoxyphenyl)hydrazono]acetate (CAS RN 27143-07-3) with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8451
ex 2929 10 00
65
Ethyl isocyanate (CAS RN 109-90-0) with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8510
ex 2930 90 98
36
Anhydrous potassium О -isopentyl-dithiocarbonate (CAS RN 928-70-1) with a purity by weight of 90 % or more
0  %
-
31.12.2027
0.8447
ex 2930 90 98
39
Thiodiacetic acid (CAS RN 123-93-3) with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8481
ex 2930 90 98
41
2,2'-Diallyl-4,4'-sulphonyldiphenol (CAS RN 41481-66-7) with a purity by weight of 96 % or more
0  %
-
31.12.2027
0.8478
ex 2932 20 90
28
( R )-3-(3,4-difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl)furan-2(5 H )-one (CAS RN 2875066-35-4) with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8452
ex 2933 29 90
38
Cyazofamid (ISO) (CAS RN 120116-88-3) with a purity by weight of 94 % or more
0  %
-
31.12.2027
0.8485
ex 2933 39 99
08
Fluazinam (ISO) (CAS RN 79622-59-6) with a purity by weight of 97 % or more
0  %
-
31.12.2027
0.8456
ex 2933 59 95
32
5-Chloro-3-nitropyrazolo[1,5-a]pyrimidine (CAS RN 1363380-51-1) with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8484
ex 2933 59 95
44
1,4,5,6-Tetrahydro-1,2-dimethylpyrimidine (CAS RN 4271-96-9) with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8488
ex 2933 59 95
46
Trilaciclib (CAS RN 1374743-00-6) with a purity by weight of 99 % or more
0  %
-
31.12.2027
0.8455
ex 2933 99 80
43
4-([1,2,4]Triazolo[1,5-a]pyridin-7-yloxy)-3-methylaniline (CAS RN 937263-71-3) with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8487
ex 2934 99 90
07
Cedazuridine (INN) (CAS RN 1141397-80-9) with a purity by weight of 99 % or more
0  %
-
31.12.2027
0.8472
ex 2934 99 90
08
(R )- tert -butyl 2-(6-(5-chloro-2-((tetrahydro-2H-pyran-4-yl)amino)pyrimidin-4-yl)-1-oxoisoindolin-2-yl)propanoate (CAS RN 2095665-45-3) with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8449
ex 2934 99 90
09
3-[2-{(2 R ,3 S )-3-[(1 R )-1-{[ tert -butyl(dimethyl)silyl]oxy}ethyl]-4-oxoazetidin-2-yl}propanoyl]-4,4-dimethyl-1,3-oxazolidin-2-one (isomeric mixture of CAS RNs 114341-89-8 and 114418-63-2) with a purity by weight of 99 % or more
0  %
-
31.12.2027
0.8479
ex 2935 90 90
16
2-Bromo- N -(4,5-dimethyl-1,2-oxazol-3-yl)- N -(methoxymethyl) benzene-1-sulfonamide (CAS RN 415697-57-3) with a purity by weight of 97 % or more
0  %
-
31.12.2027
0.8467
ex 2935 90 90
26
5-(2-Fluorophenyl)-1-(pyridin-3-ylsulfonyl)-1 H -pyrrole-3-carbaldehyde (CAS RN 881677-11-8) with a purity by weight of 97 % or more
0  %
-
31.12.2027
0.8471
ex 3824 99 92
73
Tri -C 8-10 -alkyl amines (CAS RN 68814-95-9) with a purity by weight of 95 % or more
0  %
-
31.12.2027
0.8463
ex 3824 99 92
74
Reaction mass containing by weight:
—
22,4 % or more, but not more than 26,4 % of 3-methylphenyl diphenyl phosphate (CAS RN 69500-28-3);
—
17,3 % or more, but not more than 21,3 % of 4-methylphenyl diphenyl phosphate (CAS RN 78-31-9);
—
5 % or more, but not more than 9 % of bis(3-methylphenyl) phenyl phosphate (CAS RN 34909-68-7);
—
8,9 % or more, but not more than 12,9 % of 3-methylphenyl 4-methylphenyl phenyl phosphate (CAS RN 222165-66-4);
—
26,9 % or more, but not more than 30,9 % of triphenyl phosphate (CAS RN 115-86-6)
0  %
-
31.12.2027
0.8486
ex 3824 99 92
75
Mixture, containing by weight:
—
not more than 75 % of tetrabutyltin (CAS RN 1461-25-2),
—
not more than 20 % of tributyltin chloride (CAS RN 1461-22-9),
—
not more than 4 % of dibutyltin dichloride (CAS RN 683-18-1),
for use in the production of butyltin compounds used in glass manufacture and tributyltin chloride used as a catalyst in the pharmaceutical industry  ( 2 )
3,2  %
-
31.12.2027
0.8506
ex 3824 99 92
79
Mixture, containing by weight:
—
tributyltin chloride (CAS RN 1461-22-9) with a purity by weight of 80 % or more,
—
not more than 5 % tetrabutyltin (CAS RN 1461-25-2),
—
not more than 6 % dibutyltin dichloride (CAS RN 683-18-1),
—
not more than 11 % o-xylene (CAS RN 95-47-6),
for use in the production of tributyltin chloride used as a catalyst in the pharmaceutical industry  ( 2 )
3,2  %
-
31.12.2027
0.8517
ex 3824 99 92
83
1-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) with a purity by weight of 70 % or more, but not more than 90 %
0  %
-
31.12.2024
0.8499
ex 3824 99 92
86
Tall oil N , N -dimethyl fatty amides (CAS RN 68308-74-7) with a purity by weight of 99 % or more
0  %
-
31.12.2027
0.8498
ex 3824 99 93
33
Preparation containing by weight
—
60 % or more but not more than 70 % of calcium rel -(1 R ,2 S )-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1),
—
30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1),
—
1 % or more but not more than 5 % of CI Pigment Blue 29 (CAS RN 57455-37-5) and
—
1 % or more but not more than 5 % of CI Pigment Violet 15 (CAS RN 12769-96-9)
0  %
-
31.12.2027
0.8497
ex 3824 99 93
36
Preparation containing by weight 60 % or more but not more than 70 % of calcium rel -(1 R ,2 S )-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1) and 30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1)
0  %
-
31.12.2027
0.8514
ex 3824 99 96
43
2-(Ethylthio)ethanethiol functionalized silicagel with a purity by weight of 98 % or more
0  %
-
31.12.2027
0.8491
ex 3907 29 99
70
Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) (CAS RN 29658-26-2) containing by weight not more than 35 % of additives
0  %
-
31.12.2027
0.8504
ex 4009 31 00
ex 4009 32 00
10
20
Multilayered rubber pipe, reinforced with aramide fabric, whether or not having polyamide connection elements and steel clamps, for use in the manufacture of automotive heat exchangers and/or condenser in automotive air conditioning systems  ( 2 )
0  %
-
31.12.2027
0.8480
ex 7326 90 98
60
Vane ring of a kind for fastening gas flow control blades:
—
of iron or steel alloy,
—
with a heat resistance of 830 °C or more but not more than 1 050  °C,
—
with an external diameter of not more than 92 mm,
—
with holes for holding the gas flow control blades,
for use in the manufacture of turbochargers  ( 2 )
0  %
-
31.12.2027
0.8512
ex 7326 90 98
70
Disc of a kind for ensuring the gas flow channel width:
—
of iron or steel alloy,
—
with a heat resistance of 830 °C or more but not more than 1 050  °C,
—
with an external diameter of not more than 92,5 mm,
—
with an internal diameter of not more than 62 mm,
for use in the manufacture of turbochargers  ( 2 )
0  %
-
31.12.2027
0.8464
ex 7609 00 00
40
Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers:
—
with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm,
—
with a weight of 0,02 kg or more, but not more than 0,25 kg,
for use in the manufacture of cooling system in vehicles of Chapter 87  ( 2 )
0  %
p/st
31.12.2027
0.8503
ex 7609 00 00
50
Machined aluminium components:
—
containing by weight 0,55 %, or more but not more than 0,61 % of magnesium,
—
containing by weight 0,55 %, or more but not more than 0,61 % of silicon,
—
with a hardening state of T5 or T6,
—
with a mass of 0,05 kg or more, but not more than 0,2 kg,
for use in the manufacture of CO 2 cooling systems in motor vehicles  ( 2 )
0  %
p/st
31.12.2027
0.8493
ex 7609 00 00
60
Aluminium connection block:
—
with a weight of 3 g or more but not more than 400 g,
—
manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade,
—
being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly,
—
with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line),
—
with sockets designed for brazing or fastening,
—
with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm,
for the manufacture of automotive cooling and air conditioning systems  ( 2 )
0  %
p/st
31.12.2027
0.8466
ex 8409 91 00
33
Camshaft carrier for a spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, with:
—
a weight of 4,0 kg or more but not more than 5,5 kg,
—
a wall thickness of 2,0 mm or more but not more than 6,0 mm,
for use in the manufacture of motor vehicle engines  ( 2 )
0  %
p/st
31.12.2027
0.8469
ex 8409 91 00
38
Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, for use in the manufacture of motor vehicle engines  ( 2 )
0  %
-
31.12.2027
0.8483
ex 8414 90 00
15
Fan assembly made of aluminium and magnesium alloy:
—
with an outer diameter of 54 mm or more but not more than 130 mm,
—
with a height of 8 mm or more but not more than 30 mm,
—
with two discs connected by blades of involute shape,
—
with or without dowel, and with or without washer,
for use in the manufacture of electromotors  ( 2 )
0  %
-
31.12.2027
0.8494
ex 8414 90 00
25
Scroll type compressor housing of an aluminium alloy of a kind with:
—
a heat resistance of 200 °C or more but not more than 250 °C,
—
one or more fixing points suitable for mounting an actuator,
for use in the manufacture of turbochargers  ( 2 )
0  %
-
31.12.2027
0.8465
ex 8415 90 00
15
Electrically welded manifolds for the condenser in automotive air conditioning systems:
—
consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding,
—
containing internal baffles responsible for the proper flow of coolant,
—
with a length of 190 mm or more, but not more than 460 mm,
—
with a diameter of 9 mm or more, but not more than 42 mm,
—
with a weight of 0,01 kg or more, but not more than 0,45 kg,
—
whether or not having aluminium connection blocks,
used in the production of air conditioning systems in vehicles of Chapter 87  ( 2 )
0  %
p/st
31.12.2027
0.8458
ex 8501 53 50
50
Asynchronous traction motor, with:
—
a continuous power of 140 kW or more but not more than 180 kW,
—
a liquid cooled system,
—
a total length of 580 mm or more but not more than 730 mm,
—
a total width of 550 mm or more but not more than 670 mm,
—
a total height of 510 mm or more but not more than 630 mm,
—
with a weight of not more than 390 kg,
—
with or without reduction gear,
—
with or without starter generator,
—
2 mounting points,
for use in the manufacture of the electric drive of hybrid buses  ( 2 )
0  %
-
31.12.2027
0.8508
ex 8505 11 10
78
Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions:
—
a length of 200 mm or more but not more than 205 mm,
—
a width of 58 mm or more but not more than 62 mm,
—
a height of 25 mm or more but not more than 30 mm,
with a stud mounted in the middle
0  %
-
31.12.2027
0.8453
ex 8512 30 90
40
Device for simulating engine sound at reduced speed of a hybrid or electric vehicle:
—
containing at least printed circuit board and loudspeaker,
—
in a plastic housing with a holder,
for use in the manufacture of goods of Chapter 87  ( 2 )
0  %
-
31.12.2027
0.8460
ex 8537 10 91
43
Electronic suspension control unit with:
—
a printed circuit board in plastic housing,
—
LIN and CAN buses,
—
a programmable memory,
—
a signal processor,
—
an operating direct current voltage of 9 V or more but not more than 16 V,
—
at least one connector,
—
whether or not with metal mounting bracket,
for use in the manufacture of goods of Chapter 87  ( 2 )
0  %
-
31.12.2027
0.8461
ex 8708 50 20
18
Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of:
—
two cardan rods,
—
central universal joint,
—
central bearing with suspension in a plastic cover,
—
universal joints on both ends of the shaft,
—
slip, tube and end yokes,
—
of a length of 1,4 m or more but not more than 2,4 m,
for use in the production of goods of Chapter 87  ( 2 )
0  %
-
31.12.2027
0.8507
ex 8714 99 90
50
Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the manufacture of bicycles, including electrical bicycles  ( 2 )
0  %
-
31.12.2027
( 1 )   Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’;
( 2 )   Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’.
Council Regulation (EU) 2023/1190 of 16 June 2023 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products

Schedules & Appendices

Cite this act
