LawPlayer
My bookmarks
Source

Commission Implementing Regulation (EU) 2025/221 of 6 February 2025 granting a Union authorisation for the single biocidal product Neporex 2SG in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

Commission Implementing Regulation (EU) 2025/221 of 6 February 2025 granting a Union authorisation for the single biocidal product Neporex 2SG in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

Implementing Regulation (EU) 2025/221 · Regulation · 3 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

A Union authorisation with authorisation number EU-0032480-0000 is hereby granted to Elanco Animal Health Inc. for the making available on the market and use of the single biocidal product ‘Neporex 2SG’ in accordance with the summary of the biocidal product characteristics set out in the Annex. The Union authorisation is valid from 27 February 2025 until 31 January 2035.

Article 2

Open ↗

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

SUMMARY OF PRODUCT CHARACTERISTICS FOR A BIOCIDAL PRODUCT

ANNEXSupplementary provisions

Open ↗

ANNEX SUMMARY OF PRODUCT CHARACTERISTICS FOR A BIOCIDAL PRODUCT Neporex 2SG Product type(s) PT18: Insecticides, acaricides and products to control other arthropods Authorisation number: EU-0032480-0000 R4BP asset number: EU-0032480-0000 1.    ADMINISTRATIVE INFORMATION 1.1.    Trade name(s) of the product Trade name(s) Neporex 2SG MS Madendood Plus Larvokill LarvEx Raxon Rae 1.2.    Authorisation holder Name and address of the authorisation holder Name Elanco Animal Health Inc. Address Mattenstrasse 24A 4058 Basel CH Authorisation number EU-0032480-0000 R4BP asset number EU-0032480-0000 Date of the authorisation 27 February 2025 Expiry date of the authorisation 31 January 2035 1.3.    Manufacturer(s) of the product Name of manufacturer Schirm GmbH Address of manufacturer Dieselstrasse 8 85107 Baar-Ebenhausen Germany Location of manufacturing sites Schirm GmbH site 1 Dieselstr. 8 85107 Baar-Ebenhausen Germany Name of manufacturer Ipanema Industria de Produtos Veterinários Ltda Address of manufacturer Rodovia Raposo Tavares KM 113 – Araçoiaba da Serra – SP Brazil Location of manufacturing sites Ipanema Industria de Produtos Veterinários Ltda site 1 Rodovia Raposo Tavares KM 113 – Barreiro 18190-000 Araçoiaba da Serra SP Brazil Name of manufacturer Chemical Process Technologies (Pty) Ltd. Address of manufacturer Unit 21, Second Floor, 1 Melrose Boulevard – Melrose Arch South Africa Location of manufacturing sites Chemical Process Technologies (Pty) Ltd. site 1 45 Battery St 0184 Waltloo, Ext1 South Africa 1.4.    Manufacturer(s) of the active substance(s) Active substance N-cyclopropyl-1,3,5-triazine-2,4,6-triamine (Cyromazine) Name of manufacturer Elanco (Shanghai) Animal Health Co., Ltd. Address of manufacturer 1 Changzhong Road, Wusi Farm, Fengxian County 201423 Shanghai China Location of manufacturing sites Elanco (Shanghai) Animal Health Co., Ltd. site 1 1 Changzhong Road, Wusi Farm, Fengxian County 201423 Shanghai China Active substance N-cyclopropyl-1,3,5-triazine-2,4,6-triamine (Cyromazine) Name of manufacturer Shandong Guobang Pharmaceutical Co., LTD Address of manufacturer F12th, Trendyway Building, No 3688, Jiangnan Road, Binjiang District – Hangzhou, Zhejiang Province China Location of manufacturing sites Shandong Guobang Pharmaceutical Co., LTD site 1 NO.02131 Xiangjiangxiyi Street, Advanced Manufacturing Industrial Park, Binhai Economic Development Zone – Weifang City, Shandong Province China 2.    PRODUCT COMPOSITION AND FORMULATION 2.1.    Qualitative and quantitative information on the composition of the product Common name IUPAC name Function CAS number EC number Content (%) N-cyclopropyl-1,3,5-triazine-2,4,6-triamine (Cyromazine)   active substance 66215-27-8 266-257-8 2  % (w/w) 2.2.    Type(s) of formulation SG Water soluble granule 3.    HAZARD AND PRECAUTIONARY STATEMENTS Hazard statements H412: Harmful to aquatic life with long lasting effects. Precautionary statements P273: Avoid release to the environment. P501: Dispose of contents in accordance with national regulation. P501: Dispose of container in accordance with national regulation. 4.    AUTHORISED USE(S) 4.1.    Use description Table 1 Pouring with watering can Product type PT18: Insecticides, acaricides and products to control other arthropods Where relevant, an exact description of the authorised use Not relevant Target organism(s) (including development stage) Scientific name: Musca domestica Common name: house fly Development stage: larvae Field(s) of use indoor use In animal housing. Application method(s) Method: pouring Detailed description: Pouring of diluted product using a watering can. Application rate(s) and frequency Application rate: Apply 25 g biocidal product/m 2 = 0,5 g active ingredient/m 2 ; this equals 1 litre application solution per m 2 2,5 % (w/w); For preparation of the application solution dilute 25 g biocidal product in 1 litre water to treat 1 m 2 Number and timing of application: Stables for dairy cows and small ruminants: maximum (max.) 5 applications per year Stables for beef cattle: max. 5 applications per year Stables for pigs: max. 1 applications per year Stables for chicken: max. 1 application per year Stables for other poultry (turkeys, ducks, geese): max. 5 applications per year Stables for rabbits: max. 5 applications per year In case more applications per year are necessary for an animal category due to repeated infestation, alternative products with a different active substance must be used. Reapplication in case of multiple applications: At least 6 weeks and up to several months between applications. Category(ies) of users professional Pack sizes and packaging material The product is in direct contact with polyethylene (PE) regardless of the container. — Jar (PE): 100 g – 20 kg — Closure: PE with induction heat sealing foil (Aluminium) — Sachet (Multilayer aluminium foil with PE as primary packaging): 20 g – 100 g — Closed by heat sealing process — Flexible pack (multilayer material (polyethylene terephthalate (PET) and PE)): 3 kg – 5 kg — Closed by heat sealing process — Drum (primary packaging: multilayer material (PET and PE): 4 kg – 20 kg — closed with polypropylene (PP) zip tie — secondary packaging: a rigid container (Fibre / card-board / PE / PP / other similar polymer with a lid on the top) 4.1.1.    Use-specific instructions See general directions for use. 4.1.2.    Use-specific risk mitigation measures See general directions for use. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5.    GENERAL DIRECTIONS FOR USE   ( 1 ) 5.1.    Instructions for use General Not authorised for use in veal calve housings. Dilute the granules in water (25 g biocidal product in 1 litre water to treat 1 m 2 ). Only watering can application is allowed. Fly population reduction can be observed starting from 2 weeks after product application. The following general resistance management measures shall be applied: — If the development of resistance is suspected, a change to another product with an active substance with a different mode of action is required. — In order to avoid the occurrence of resistance to any active substance, use products with different modes of action in alternation and avoid the frequent repeated use of the same active substance. — It is recommended to complement the treatment in livestock facilities with an adulticide product. — The use of biocidal products can be combined with other sanitation measures (e.g. frequent removal of dung) or non-chemical means of control (for example the use of parasitoids, where this is viable) within an integrated fly control program. Always read the label or leaflet before use and follow all the instructions provided. Cattle and small ruminant (e.g. sheep and goats) facilities Deep litter: Conduct the treatment within the first few days (up to 3 days) of starting a rearing cycle or within the first 3 days after dung removal and the build-up of new breeding material has started. Use treatment along walls, edges and spillage areas around feeders, drinkers and where manure accumulates. Fly breeding sites are likely to be where manure is not compacted, particularly along walls or fences, because in well-trodden litter limited fly larvae develop. Slatted floor: Treat the entire floor area within the first few days (up to 3 days) after cleaning out the dung pit but only after the new manure starts to pile up again. In case of small ruminants (e.g. sheep and goats) kept on soft bedding: larvae can be found on the whole surface of the cubicle / pen; therefore, application of the product to the entire surface is required. Apply in corners or around drinking and feeding troughs if necessary. Pigs facilities All-in, all-out system: Conduct the treatment within the first few days (up to 3 days) after cleaning out the dung pit but only after the new manure starts to build up. Slatted floors: Treat the entire floor area within the first few days (up to 3 days) after cleaning out the dung pit but only after the new manure starts to build up. Deep litter: Conduct the treatment within the first few days (up to 3 days) after dung removal but only after the manure starts to build up. Use treatment along walls, edges and spillage areas around feeders, drinkers and where manure accumulates. Fly breeding sites are likely to be where manure is not compacted, particularly along walls or fences, because in well-trodden litter limited fly larvae develop. Chicken poultry facilities (layers, broilers, breeders) Deep pits, slatted floor, floor-manure-piling operations: Conduct the treatment to the entire dung area within the first few days (up to 3 days) after manure removal but only after the manure starts to build up. Bedding operations: Apply onto the humid points where larvae develop, such as in areas around drinkers and feeders or in points where a leakage of water occurs (fall of steam condensation, leakage from water pipes etc.). Operations with manure removal belts: Remove manure outside the operations at intervals sufficient enough to avoid the development of larvae. Spillage of manure on the floor or accumulation of manure in corners may occur and facilitate the development of larvae. Conduct the treatment by pouring the application solution onto these points. Other poultry (turkeys, ducks, geese) Bedding operations: Apply the application solution onto the humid points where larvae develop, such as in areas around drinkers and feeders or in points where a leakage of water occurs (fall of steam condensation, leakage from water pipes etc.). Slatted areas: Apply the application solution to the entire dung area within the first few days (up to 3 days) after manure removal but only after the manure starts to build up. Re-apply whenever the level of manure increases by 10 cm. Rabbit facilities Deep pits, floor-manure-piling operations: Apply the application solution to the entire dung area within the first few days (up to 3 days) after manure removal but only after the first manure starts to build up. Re-apply whenever the level of manure increases by 10 cm. Operations with mechanical removal systems: Remove Manure outside the operations at intervals sufficient enough to avoid the development of larvae. Spillage of manure on the floor or accumulation of manure on corners may occur and facilitate the development of larvae. Conduct the treatment by pouring the application solution onto these points. 5.2.    Risk mitigation measures 1) Use an applicator (e.g. measuring spoon or beaker) for mixing and loading. 2) The following risk mitigation measures shall be applied without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work: a) The wearing of chemical resistant gloves meeting the requirement of European Standard EN 374 or equivalent is required during product handling phase (glove material to be specified by the authorisation holder within the product information). b) Wear suitable protective footwear against chemicals in accordance with European Standard EN 13832 or equivalent when applying the product. c) For subsequent handling of treated manure wearing of chemical resistant gloves in accordance with European Standard EN 374 or equivalent, a protective coverall in accordance with European Standard EN 13034 (at least type 6) or equivalent and suitable protective footwear against chemicals in accordance with European Standard EN 13832 or equivalent is recommended. 3) Do not apply directly on animals. 4) Do not treat feed, drinks and feeding troughs. 5) Keep out of reach of children. 6) Do not apply in areas accessible for the general public. 7) Do not use in breeding stations or other breeding areas for chicks. 8) Do not use in animal housings where exposure to a sewage treatment plant (STP) or direct emission to surface water cannot be prevented. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 1) Do not discharge the biocidal product nor the diluted solution of the biocidal product into the sewage system or waters. 2) Dampen solid material carefully to prevent it being blown away. 3) Take up mechanically and collect in suitable container for disposal. 4) IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor. 5) IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor. 6) IF INHALED: If symptoms occur call a POISON CENTRE or a doctor. 7) IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor. 5.4.    Instructions for safe disposal of the product and its packaging 1) Residues of the biocidal product must be disposed of in accordance with national and regional regulations. Containers containing residues of the product have to be handled accordingly. 2) Leave biocidal products in original containers. Do not mix with other wastes. 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage 1) Shelf-life: 60 months 2) Do not store near food, drink and feed. 6.    OTHER INFORMATION With respect to the ‘Category(ies) of users’ note: Professionals (including industrial users) means trained professionals if this is required by national legislation. Full titles of EN standards and legislation referred to in section 5.2 EN 374 – Protective gloves against dangerous chemicals and micro-organisms. EN 13832 – Footwear protecting against chemicals EN 13034 – Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment). Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ). ( 1 )   Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses.

Other acts of the same type
Council Implementing Regulation (EU) 2022/432 of 15 March 2022 amending Implementing Regulation (EU) No 282/2011 as regards the VAT and/or excise duty exemption certificateCommission Implementing Regulation (EU) 2022/433 of 15 March 2022 imposing definitive countervailing duties on imports of stainless steel cold-rolled flat products originating in India and Indonesia and amending Implementing Regulation (EU) 2021/2012 imposing a definitive anti-dumping duty and definitively collecting the provisional duty imposed on imports of stainless steel cold-rolled flat products originating in India and IndonesiaCommission Implementing Regulation (EU) 2022/434 of 15 March 2022 amending Regulation (EU) 2019/159 imposing a definitive safeguard measure against imports of certain steel productsCommission Implementing Regulation (EU) 2022/421 of 14 March 2022 amending Implementing Regulation (EU) 2015/1998 laying down detailed measures for the implementation of the common basic standards on aviation security (Text with EEA relevance)Commission Implementing Regulation (EU) 2022/422 of 14 March 2022 laying down the technical specifications, measures and other requirements for the implementation of the decentralised IT system referred to in Regulation (EU) 2020/1783 of the European Parliament and of the CouncilCommission Implementing Regulation (EU) 2022/423 of 14 March 2022 laying down the technical specifications, measures and other requirements for the implementation of the decentralised IT system referred to in Regulation (EU) 2020/1784 of the European Parliament and of the CouncilCommission Implementing Regulation (EU) 2022/424 of 14 March 2022 amending and correcting Annexes I, IV, XV, XVI, XVII and XXI to Implementing Regulation (EU) 2021/404 as regards the lists of third countries, territories or zones or compartments thereof authorised for the entry into the Union of equine animals, meat products, milk, colostrum, colostrum-based products and dairy products, casings and aquatic animals (Text with EEA relevance)Commission Implementing Regulation (EU) 2022/425 of 14 March 2022 amending Implementing Regulation (EU) 2019/947 as regards postponing the transition dates for the use of certain unmanned aircraft systems in the ‘open’ category and the date of application for standard scenarios for operations executed in or beyond the visual line of sight (Text with EEA relevance)Commission Regulation (EU) 2022/455 of 14 March 2022 amending Regulation (EC) No 748/2009 as regards the update of the list of aircraft operators which performed an aviation activity listed in Annex I to Directive 2003/87/EC of the European Parliament and of the Council on or after 1 January 2006 specifying the administering Member State for each aircraft operator (Text with EEA relevance)Commission Delegated Regulation (EU) 2022/973 of 14 March 2022 supplementing Regulation (EU) 2019/1009 of the European Parliament and of the Council by laying down criteria on agronomic efficiency and safety for the use of by-products in EU fertilising products (Text with EEA relevance)Commission Implementing Regulation (EU) 2022/414 of 11 March 2022 correcting the Finnish language version of Regulation (EU) No 965/2012 laying down technical requirements and administrative procedures related to air operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (Text with EEA relevance)Commission Implementing Regulation (EU) 2022/415 of 11 March 2022 concerning the authorisation of malic acid, citric acid produced by Aspergillus niger DSM 25794 or CGMCC 4513/CGMCC 5751 or CICC 40347/CGMCC 5343, sorbic acid and potassium sorbate, acetic acid, sodium diacetate and calcium acetate, propionic acid, sodium propionate, calcium propionate and ammonium propionate, formic acid, sodium formate, calcium formate and ammonium formate, and lactic acid produced by Bacillus coagulans (LMG S-26145 or DSM 23965), or Bacillus smithii (LMG S-27890) or Bacillus subtilis (LMG S-27889) and calcium lactate as feed additives for all animal species (Text with EEA relevance)

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next