Commission Implementing Regulation (EU) 2025/1171 of 16 June 2025 granting a Union authorisation for the biocidal product family PRODHYNET’s Lactic acid based products in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

Article 1

A Union authorisation with authorisation number EU-0033504-0000 is hereby granted to PRODHYNET SA for the making available on the market and use of the same biocidal product family ‘PRODHYNET’s Lactic acid based products’ in accordance with the summary of the biocidal product characteristics set out in the Annex. The Union authorisation is valid from 7 July 2025 until 31 August 2034.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Summary of product characteristics for a biocidal product family

ANNEXSupplementary provisions

ANNEX Summary of product characteristics for a biocidal product family PRODHYNET’s Lactic acid based products Product type(s) PT03: Veterinary hygiene Authorisation number EU-0032621-0000 R4BP asset number EU-0032621-0000 PART I FIRST INFORMATION LEVEL 1.    ADMINISTRATIVE INFORMATION 1.1.    Family name Name PRODHYNET’s Lactic acid based products 1.2.    Product type(s) Product type(s) PT03: Veterinary hygiene 1.3.    Authorisation holder Name and address of the authorisation holder Name PRODHYNET SA Address 11 avenue des châtelets 22440 PLOUFRAGAN FR Authorisation number   EU-0032621-0000 R4BP asset number   EU-0032621-0000 Date of the authorisation   7 July 2025 Expiry date of the authorisation   31 August 2034 1.4.    Manufacturer(s) of the product Name of manufacturer HYPRED SAS - KERSIA Group Address of manufacturer 55, Boulevard Jules Verger - BP10180 35803 DINARD France Location of manufacturing sites HYPRED SAS - KERSIA Group / Dinard 55, Boulevard Jules Verger; BP 10180 35803 DINARD Cedex France HYPRED SAS - KERSIA Group / Vaas Zone Industrielle Le Roineau 72500 VAAS France Medentech Ltd – KERSIA Group Clonard Road Y35Y7WY WEXFORD Ireland SOPURA – KERSIA Group Parc Paysager de Tyberchamps 14 7180 SENEFFE Belgium KERSIA DEUTSCHLAND GmbH Marie-Curie-Straße 23 53332 BORNHEIM – SECHTEM Germany Holchem Laboratories Ltd – KERSIA Group Gateway House, Pilsworth Road, Pilsworth Industrial Estate BL9 8RD Bury United Kingdom of Great Britain and Northern Ireland (the) KERSIA AUSTRIA GmbH PFONGAUERSTRAßE 17 5202 NEUMARKT AM WALLERSEE Austria KERSIA POLSKA Sp.z.o.o Niepruszewo, ul. Kasztanowa 4 64-320 BUK Poland KERSIA ITALIA S.r.l Strada Montodine – Gombito; Loc. Cà Nova 26010 RIPALTA ARPINA (CR) Italy KERSIA IBERICA SL / Estella Pol. Miguel Eguía C/Zarapuz s/n 31200 ESTELLA (NAVARRA) Spain Kilco Holdings Ltd – KERSIA Group Broomhouses 2 Industrial Estate; Old Glasgow Road DG11 2SD LOCKERBIE United Kingdom of Great Britain and Northern Ireland (the) Kilco (International) Ltd – KERSIA Group 1A Trench Road Mallusk; Newtownabbey BT36 4TY CO ANTRIM Ireland SOPURA Quimica – KERSIA Group Pol. Ind. “La Canaleta“; Avinguda Júpiter n° 7 25300 TARREGA (LLEIDA) Spain KERSIA DEUTSCHLAND GmbH Oberbrühlstraße 16-18 87700 Memmingen Germany 1.5.    Manufacturer(s) of the active substance(s) Active substance L-(+)-lactic acid Name of manufacturer PURAC Bioquimica SA Address of manufacturer Gran Vial 19-25 8160 Montmelo - Barcelona Spain Location of manufacturing sites PURAC Bioquimica SA Gran Vial 19-25 8160 Montmelo - Barcelona Spain PURAC BIOCHEM BV Arkelsedijk 46 4206 AC Gorinchem Netherlands (the) Purac Sínteses Ltda Av. Rui Barbosa, 521 CEP 28015-520 Campos dos Goytacazes - RJ Brazil Purac America Inc. 650 Industrial Park Drive, P.O. Box 38 NE 68008 Blair United States (the) Purac (Corbion) Thailand Ltd Tambol Huay Pong, Amphoe Muang 21150 Rayong Thailand Active substance L-(+)-lactic acid Name of manufacturer Jungbunzlauer S.A. Address of manufacturer Z.I. Portuaire BP 32 67390 Marckolsheim France Location of manufacturing sites Jungbunzlauer S.A. Z.I. Portuaire BP 32 67390 Marckolsheim France 2.    PRODUCT FAMILY COMPOSITION AND FORMULATION 2.1.    Qualitative and quantitative information on the composition of the family Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid   active substance 79-33-4 201-196-2 8,4 - 8,4 % (w/w) Sodium p-cumenesulphonate   Non-Active substance 15763-76-5 239-854-6 1,32 - 1,32 % (w/w) Sodium 2-ethylhexyl sulfate   Non-Active substance 126-92-1 204-812-8 0 - 2,1 % (w/w) Diethanolamine   Non-Active substance 111-42-2 203-868-0 3,92 - 4,234 % (w/w) 2.2.    Type(s) of formulation Formulation type(s) AL Any other liquid PART II SECOND INFORMATION LEVEL - META SPC(S) 1.    META SPC 1 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 1 identifier Identifier Meta SPC: meta SPC 1 - Dipping, foaming, spraying ready to use products 1.2.    Suffix to the authorisation number Number 1-1 1.3.    Product type(s) Product type(s) PT03: Veterinary hygiene 2.    META SPC 1 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid   active substance 79-33-4 201-196-2 8,4 - 8,4 % (w/w) Sodium p-cumenesulphonate   Non-Active substance 15763-76-5 239-854-6 1,32 - 1,32 % (w/w) Diethanolamine   Non-Active substance 111-42-2 203-868-0 4,234 - 4,234 % (w/w) 2.2.    Type(s) of formulation of the meta SPC 1 Formulation type(s) AL Any other liquid 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1 Hazard statements H319: Causes serious eye irritation. Precautionary statements P264: Wash hands thoroughly after handling. P280: Wear eye protection. P280: Wear face protection. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical attention. P337+P313: If eye irritation persists: Get medical advice. 4.    AUTHORISED USE(S) OF THE META SPC 4.1.    Use description Table 1 Disinfection of teats of milk producing animals by manual or automated dipping, foaming or spraying after milking Product type PT03: Veterinary hygiene Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Field(s) of use indoor use Manual or automated disinfection of teats of milk producing animals by dipping, foaming or spraying after milking Application method(s) Method: Dipping, foaming or spraying Detailed description: Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine. Application rate(s) and frequency Application rate: application rate per animal: - cows and buffaloes 3 to 10 ml (5 to 8 ml recommended) - sheep 1,5 to 5 ml (1,5 to 3 ml recommended) - goats 2,5 to 6 ml (2,5 to 4 ml recommended) Ready to use product Number and timing of application: Contact time : 5 minutes Frequency: 2 to 3 times per day Category(ies) of users professional Pack sizes and packaging material HDPE (High Density Polyethylene) jerrycans 5, 10, 22, 25 and 30 litre HDPE barrel 60 litre HDPE drums 120 and 220 litre HDPE container 640 and 1000 litre 4.1.1.    Use-specific instructions See general directions for use of meta SPC 1 4.1.2.    Use-specific risk mitigation measures See general directions for use of meta SPC 1 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use of meta SPC 1 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use of meta SPC 1 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use of meta SPC 1 5.    GENERAL DIRECTIONS FOR USE OF THE META SPC 1 5.1.    Instructions for use Fill the dipping/foaming cup/sprayer manually or automatically with the ready to use product. Manual or automatic dipping/foaming/spraying on animal’s teats on the full length of the teat after milking. Make sure that the teats are fully covered with disinfectant. Leave the product until next milking. Keep the animals standing for at least 5 minutes until the product has dried. At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster. Avoid contact with eyes. Wash hands after work. Product must be brought to a temperature between 20°C and 30°C before use. 5.2.    Risk mitigation measures Wear chemical goggles or face protection consistent with European Standard EN ISO 16321 or equivalent. For manual application by spraying: Wear protective chemical resistant gloves consistent with European Standard EN ISO 374 during product handling phase. Keep out of reach of children. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF INHALED: If symptoms occur call a POISON CENTRE or a doctor. IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor. IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor. IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor. Refer to the safety data sheet available for professional user: it contains an emergency phone number. Large spillage: Mark out, soak up with an inert absorbant and pump in an emergency tank. Never return spills in original containers for re-use. Keep in suitable, properly labelled and closed containers for disposal. 5.4.    Instructions for safe disposal of the product and its packaging At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant. The paper towels used for removing the product and drying the teats are disposed in the normal domestic waste. 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf life: 2 years in HDPE 6.    OTHER INFORMATION Full titles of EN standards and legislation referred to in section 5.2:   EN ISO 374 – Protective gloves against dangerous chemicals and micro-organisms.   EN ISO 16321 – Eye and face protection for occupational use. 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) DOUPIS FLUIDE Market area: EU PRO AL SPRAY Market area: EU GALACTIK FL Market area: EU Spray Guard Market area: EU ExtraGuard Spray Market area: EU ROBOLAK FL Market area: EU GALACTIK PULVE Market area: EU LACTI FLUIDE Market area: EU AGRILAC FLUIDE Market area: EU LACTI SPRAY FLUIDE Market area: EU HYGIALAC FLUIDE Market area: EU BRETALAC FLUIDE Market area: EU Authorisation number   EU-0032621-0001 1-1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid   active substance 79-33-4 201-196-2 8,4 % (w/w) Sodium p-cumenesulphonate   Non-Active substance 15763-76-5 239-854-6 1,32 % (w/w) Diethanolamine   Non-Active substance 111-42-2 203-868-0 4,234 % (w/w) 1.    META SPC 2 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 2 identifier Identifier Meta SPC: meta SPC 2 - Dipping ready to use products 1.2.    Suffix to the authorisation number Number 1-2 1.3.    Product type(s) Product type(s) PT03: Veterinary hygiene 2.    META SPC 2 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 2 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid   active substance 79-33-4 201-196-2 8,4 - 8,4 % (w/w) Sodium p-cumenesulphonate   Non-Active substance 15763-76-5 239-854-6 1,32 - 1,32 % (w/w) Sodium 2-ethylhexyl sulfate   Non-Active substance 126-92-1 204-812-8 0 - 2,1 % (w/w) Diethanolamine   Non-Active substance 111-42-2 203-868-0 3,92 - 3,92 % (w/w) 2.2.    Type(s) of formulation of the meta SPC 2 Formulation type(s) AL Any other liquid 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2 Hazard statements H319: Causes serious eye irritation. Precautionary statements P264: Wash hands thoroughly after handling. P280: Wear eye protection. P280: Wear face protection. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical attention. P337+P313: If eye irritation persists: Get medical advice. 4.    AUTHORISED USE(S) OF THE META SPC 4.1.    Use description Table 1 Disinfection of teats of milk producing animals by manual or automated dipping after milking Product type PT03: Veterinary hygiene Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Field(s) of use indoor use Manual or automated disinfection of teats of milk producing animals by dipping after milking Application method(s) Method: Dipping Detailed description: Dipping cup or automated dipping machine. Application rate(s) and frequency Application rate: application rate per animal: - cows and buffaloes 3 to 10 ml (5 ml recommended) - sheep 1,5 to 5 ml (1,5 ml recommended) - goats 2,5 to 6 ml (2,5 ml recommended) Ready to use product Number and timing of application: Contact time : 5 minutes Frequency: 2 to 3 times per day Category(ies) of users professional Pack sizes and packaging material HDPE (High Density Polyethylene) jerrycans 5, 10, 22, 25 and 30 litre HDPE barrel 60 litre HDPE drums 120 and 220 litre HDPE container 640 and 1000 litre 4.1.1.    Use-specific instructions See general directions for use of meta SPC 2 4.1.2.    Use-specific risk mitigation measures See general directions for use of meta SPC 2 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use of meta SPC 2 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use of meta SPC 2 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use of meta SPC 2 5.    GENERAL DIRECTIONS FOR USE OF THE META SPC 2 5.1.    Instructions for use Fill the dipping cup manually or automatically with the ready to use product. Apply by dipping manually or automatically on animal’s teats on the full length of the teat after milking. Make sure that the teats are fully covered with disinfectant. Leave the product until next milking. Keep the animals standing for at least 5 minutes until the product has dried. At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster. Avoid contact with eyes. Wash hands after work. Product must be brought to a temperature between 20°C and 30°C before use. 5.2.    Risk mitigation measures Wear chemical goggles or face protection consistent with European Standard EN ISO 16321 or equivalent. Keep out of reach of children. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF INHALED: If symptoms occur call a POISON CENTRE or a doctor. IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor. IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor. IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor. Refer to the safety data sheet available for professional user: it contains an emergency phone number. Large spillage: Mark out, soak up with an inert absorbant and pump in an emergency tank. Never return spills in original containers for re-use. Keep in suitable, properly labelled and closed containers for disposal. 5.4.    Instructions for safe disposal of the product and its packaging At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant. The paper towels used for removing the product and drying the teats are disposed in the normal domestic waste. 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf life: 2 years in HDPE Store below 30°C 6.    OTHER INFORMATION Full titles of EN standards and legislation referred to in section 5.2: EN ISO 16321 – Eye and face protection for occupational use. 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) EDDAR FILM Market area: EU DOUPIS FILM Market area: EU GALACTIK EP Market area: EU Xtrem Guard Market area: EU ExtraGuard Xtrem Market area: EU LACTI EPAIS Market area: EU HYGIALAC EPAIS Market area: EU TREMPAGE EPAIS LACTI Market area: EU AGRILAC EPAIS Market area: EU FILMOGENE Market area: EU AGRIFILM Market area: EU BRETADINE Market area: EU BRETALAC FILM Market area: EU GEL TRAYON Market area: EU APROMADINE Market area: EU CELTADINE Market area: EU DALFILM Market area: EU FILM-AGRI Market area: EU HYGIA’TREMP Market area: EU HYGIAFILM Market area: EU PRODINE Market area: EU PRO AL Market area: EU ADIEL FILM Market area: EU CORIAFILM Market area: EU GANAFILM Market area: EU MAGDINE Market area: EU NUTRIDINE Market area: EU PLUSAFILM Market area: EU PROXAFILM Market area: EU Authorisation number   EU-0032621-0002 1-2 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid   active substance 79-33-4 201-196-2 8,4 % (w/w) Sodium p-cumenesulphonate   Non-Active substance 15763-76-5 239-854-6 1,32 % (w/w) Sodium 2-ethylhexyl sulfate   Non-Active substance 126-92-1 204-812-8 2,1 % (w/w) Diethanolamine   Non-Active substance 111-42-2 203-868-0 3,92 % (w/w)