ANNEX IV附則
ANNEX IV EU DECLARATION OF CONFORMITY (No XXXX) ( 1 ) 1. Pressure equipment or assembly (product, type, batch or serial number): 2. Name and address of the manufacturer and, where applicable, his authorised representative: 3. This declaration of conformity is issued under the sole responsibility of the manufacturer. 4. Object of the declaration (identification of pressure equipment or assembly allowing traceability; it may, where necessary for the identification of the pressure equipment or assembly, include an image): — description of the pressure equipment or assembly, — conformity assessment procedure followed, — in the case of assemblies, description of the pressure equipment constituting the assembly, and the conformity assessment procedures followed, 5. The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: 6. References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared: 7. Where appropriate, the name, address and number of the notified body which carried out the conformity assessment and the number of the certificate issued, and a reference to the EU-type examination certificate – production type, EU-type examination certificate – design type, EU design examination certificate or certificate of conformity. 8. Additional information: Signed for and on behalf of: (place and date of issue): (name, function) (signature): (where appropriate, particulars of the signatory authorised to sign the legally binding declaration for the manufacturer or his authorised representative) ( 1 ) It is optional for the manufacturer to assign a number to the declaration of conformity.