1
The number of the EU- type examination certificate, where appropriate.
The Non-automatic Weighing Instruments Regulations 2016 SCHEDULE 1 — INFORMATION TO BE MARKED ON REGULATED NON-AUTOMATIC WEIGHING INSTRUMENTS
2
The manufacturer's name, registered trade name or registered trade mark.
3
The accuracy class, enclosed in an oval or in two horizontal lines joined by two half circles.
4
Maximum capacity, in the form “Max …..”.
5
Minimum capacity, in the form “Min …..”.
6
Verification scale interval in the form “e =…..”
7
Type, batch and serial number
8
When applicable the following: (a) for instruments consisting of separate but associated units, the identification mark on each unit; (b) scale interval if different from e, in the form “d =….”; (c) maximum additive tare effect, in the form “T = +…..”; (d) maximum subtractive tare effect if it is different from Max, in the form “T = -…”; (e) tare interval if it is different from d, in the form “d T = ….”; (f) maximum safe load if it is different from “Max….”, in the form “Lim….”; (g) the special temperature limits, in the form “...°C/…°C”; and (h) ratio between load receptor and load.
9
The requirements of points 1.2 to 1.5 of Schedule 8 must be complied with.
Back to The Non-automatic Weighing Instruments Regulations 2016 — full text
Provisions on this page are reproduced verbatim from official open data. See the attribution line.
Contains public sector information licensed under the Open Government Licence v3.0 (legislation.gov.uk).