The Measuring Instruments Regulations 2016 SCHEDULE 2 — MEASURING INSTRUMENT WHICH MAY CONTINUE TO BE PUT INTO USE

Cold water meters

1

A cold-water meter— (a) in respect of which a certificate of approval was granted before 30th October 2006; and (b) which was first passed as fit for trade and stamped before 30th October 2016 under the Measuring Equipment (Cold-water Meter Regulations) 1988 .

Cold water meters

2

A cold-water meter— (a) in respect of a pattern of which EEC pattern approval was granted before 30th October 2006 in accordance with the Measuring Instruments (EEC Requirements) Regulations 1988 (or in accordance with the measures in force in another EEA state which implement Council Directive 75/33/EEC ); and (b) which bears a mark of EEC initial verification or of EEC partial verification, in either case, affixed before 30th October 2016 in accordance with the Measuring Instruments (EEC Requirements) Regulations 1988 (or in accordance with the measures in force in another EEA state which implement Council Directive 71/316/EEC as amended by Council Directives 72/427/EEC , 83/575/EEC , 87/354/EEC 87/355/EEC and 88/665/EEC .

Gas meters

3

A gas meter for use for trade which was— (a) stamped under section 17 of the Gas Act 1986 and placed on the market before 30th October 2016; or (b) stamped under article 22 of the Gas (Northern Ireland) Order 1996 and placed on the market before 30th October 2016;

Gas meters

4

A gas meter for use for trade— (a) in respect of which an EEC pattern approval was granted before 30th October 2006— (i) under the Measuring Instruments (EEC Requirements) Regulations 1988 , as applied to gas meters by the Measuring Instruments (EEC Requirements) (Gas Volume Meters) Regulations 1988 ; or (ii) by any other EEA state in accordance with the relevant provisions of measures in force which implement Council Directive 71/318 , and (b) which bears a mark of EEC initial verification affixed before 30th October 2016 under those Regulations (as so applied) or by any other EEA state in accordance with those provisions.

Active electrical energy meters

5

An active electrical energy meter for use for trade which was— (a) of a pattern or construction approved before 30th October 2006 by or under regulations made under paragraph 2 of Schedule 7 to the Electricity Act 1989 , where such approval has not been revoked under regulations so made; and (b) before 30th October 2016,— (i) certified under paragraph 5 of that Schedule or excepted from the requirement for certification under paragraph 2(2) of that Schedule; and (ii) placed on the market.

Active electrical energy meters

6

An active electrical energy meter for use for trade which was— (a) of a pattern or construction approved before 30th October 2006 by or under regulations made under paragraph 3 of Schedule 7 to the Electricity (Northern Ireland) Order 1992 where such approval has not been revoked under regulations so made; and (b) before 30th October 2016— (i) certified under paragraph 6 of that Schedule or excepted from the requirement for certification under paragraph 3(2) of that Schedule; and (ii) placed on the market.

7

An active electricity meter for use for trade— (a) in respect of which an EEC pattern approval was granted before 30th October 2006— (i) under the Measuring Instruments (EC Requirements) (Electrical Energy Meters) Regulations 1995 ; or (ii) any other EEA state in accordance with the relevant provisions of measures in force which implement Council Directive 76/891 ; and (b) which bears a mark of EEC initial verification affixed before 30th October 2016 under those Regulations or by any other EEA state in accordance with those provisions.

Automatic Weighing instruments

8

An Automatic gravimetric filing instrument— (a) in respect of which a certificate of approval was granted before 30th October 2006; and (b) which before 30th October 2016 was first passed as fit for use for trade and stamped under— (i) the Weights and Measures Regulations 1963 ; (ii) the Weighing Equipment (Filing and Discontinuous Totalising Automatic Weighing Machines) Regulations 1986 ; or (iii) the Weighing Equipment (Automatic Gravimetric Filling Instruments) Regulations 2000 .

Measuring systems for the measurement of liquid fuel and lubricants

9

A measuring system for use for trade in the making of a continuous and dynamic measurement of liquid fuel lubricants or a mixture of liquid fuels and lubricants in a quantity not exceeding 100 litres or 100 kilograms— (a) in respect of which a certificate of approval was granted before 30th October 2006; and (b) which was before 30th October 2016 first passed as fit for use for trade and stamped under the Measuring Equipment (Liquid Fuel and Lubricants) Regulations 1995 .

Measuring systems for the measurement of liquid fuel and lubricants

10

(1) A measuring system for use for trade in the making of a continuous and dynamic measurement of liquid fuel, lubricants or a mixture of liquid fuels and lubricants in a quantity not exceeding 100 litres or 100 kilograms— (a) in respect of which an EEC pattern approval was granted before 30 th October 2006; and (b) which bears a mark of EU initial verification or EU partial verification affixed before 30th October 2016. (2) For the purposes of paragraph (1)— (a) a grant of EEC pattern approval or the affixing of a mark of EEC initial verification must have been in accordance with the Measuring Instruments (EEC Requirements) Regulations 1988 or, in the case of any other EEA state, in accordance with the measures in force which implemented— (i) Council Directive 71/319 EEC ; (ii) Council Directive 71/348/EEC as amended by the Treaty of Accession 1994 ; and (iii) Council Directive 77/313/EEC as amended by Commission Directive 82/625/EEC ; and (b) the affixing of a mark of EEC partial verification must have been in accordance with the 1988 Regulations, or in the case of any other EEA state in accordance with the measures in force which implemented Council Directive 71316/EEC as amended by Council Directives 72/427/EEC , 83/575/EEC , 87/354/EEC , 87/355/EEC and 88/665/EEC .

Measuring systems used for deliveries from road tankers

11

A measuring system for use for trade in the making of a continuous and dynamic measurement of liquid fuel in a quantity exceeding 100 litres or 100 kilograms, delivered from a road tanker— (a) in respect of which a certificate of approval was granted before 30th October 2006; and (b) which was first passed as fit before 30th October 2016 for use for trade and stamped under the Measuring Equipment (Liquid Fuel delivered from Road Tankers) Regulations 1983 .

Measuring systems used for deliveries from road tankers

12

(1) A measuring system for use for trade in the making of a continuous and dynamic measurement of liquid fuel in a quantity exceeding 100 litres or 100 kilograms, delivered from a road tanker— (a) in respect of a which an EEC pattern approval was granted before 30th October 2006; and (b) which bears a mark of EU initial verification or EU partial verification affixed before 30th October 2016. (2) For the purposes of paragraph (1)— (a) a grant of EEC pattern approval or the affixing of a mark of EEC initial verification must have been in accordance with the Measuring Instruments (EEC Requirements) Regulations 1988 or, in the case of any other EEA state, in accordance with the measures in force which implemented— (i) Council Directive 71/319 EEC ; (ii) Council Directive 71/348/EEC as amended by the Treaty of Accession 1994 ; and (iii) Council Directive 77/313/EEC as amended by Commission Directive 82/625/EEC ; and (b) the affixing of a mark of EEC partial verification must have been in accordance with the 1988 Regulations, or in the case of any other EEA state in accordance with the measures in force which implemented Council Directive 71316/EEC as amended by Council Directives 72/427/EEC , 83/575/EEC , 87/354/EEC , 87/355/EEC and 88/665/EEC .

Taximeters

13

A Taximeter— (a) in respect of which a certificate of approval was granted before 30th October 2006; and (b) which was passed as fit for use before 30th October 2016 for the protection of consumers and marked under the Metropolitan Conditions of Fitness .

Material measures of length

14

A material measure of length— (a) which was first passed as fit for use for trade and stamped before 30th October 2006 under the Measuring Equipment (Measures of Length) Regulations 1986 ; and (b) which was placed on the market before 30th October 2016.

Material measures of length

15

(1) A material measure of length— (a) in respect of which an EEC pattern approval was granted under the Measuring Instruments (EEC Requirements) Regulations 1988 (b) which bears a mark of EEC initial verification or of EEC partial verification, which was affixed before 30th October 2016. (2) For the purposes of paragraph (1)— (a) a grant of EEC pattern approval, or the affixing of a mark of EEC initial verification must have been in accordance with the relevant provisions of the Measuring Instruments (EEC Requirements) Regulations 1988 or, in the case of any other member State, in accordance with the relevant provisions of measures in force which implemented Council Directive 73/362/EEC as amended by Council Directive 78/629/EEC and Commission Directive 85/146/EEC ; and (b) the affixing of a mark of EEC partial verification must have been in accordance with the Measuring Instruments (EEC Requirements) Regulations 1988, or in the case of any other member State, in accordance with the measures in force which implemented Council Directive 71/316/EEC as amended by Council Directives 72/427/EEC , 83/575/EEC , 87/354/EEC , 87/355/EEC and 88/665/EEC .

Exhaust gas analyser

16

An exhaust gas analyser (a) in respect of which a certificate of approval was granted before 30th October 2006; and (b) which was first passed as fit for use for the protection of the environment and public health pursuant to the requirements of OIML, R99/ISO 3930 before 30th October 2016.