Design and manufacture in accordance with essential requirements
7
Before placing radio equipment on the market, a manufacturer must ensure that it has been designed and manufactured in accordance with the essential requirements.
The Radio Equipment Regulations 2017 CHAPTER 2 — Manufacturers
Construction must allow operation without infringement of requirements
8
Before placing radio equipment on the market, a manufacturer must ensure it has been constructed so that the radio equipment can be operated ... without causing an infringement of the applicable requirements on the use of the radio spectrum ....
Technical documentation and conformity assessment
9
Before placing radio equipment on the market, a manufacturer must— (a) draw up the relevant technical documentation in accordance with regulation 45 (technical documentation), and (b) ensure the relevant conformity assessment procedure is carried out.
Declaration of conformity and UK marking
10
(1) Where the compliance of radio equipment with the essential requirements has been demonstrated by a relevant conformity assessment procedure, the manufacturer must, before placing the radio equipment on the market— (a) draw up a declaration of conformity in accordance with regulation 42 (declaration of conformity) , and (b) affix the UK marking in accordance with regulation 44 (UK marking) . (2) The manufacturer must keep the ... declaration of conformity up to date. (3) Where radio equipment is subject to more than one enactment requiring the drawing up of a declaration of conformity, the manufacturer must draw up a single declaration of conformity which identifies each enactment by its title.
Retention of technical documentation and ... declaration of conformity
11
A manufacturer must, for a period of 10 years beginning on the day on which the radio equipment is placed on the market, keep and, upon request, make available to an enforcing authority the following in relation to radio equipment— (a) a copy of the ... declaration of conformity, and (b) the technical documentation.
Identification of the radio equipment and manufacturer
12
(1) Before placing radio equipment on the market, a manufacturer must ensure that the radio equipment bears— (a) a type, batch or serial number, or (b) another element which allows the radio equipment to be identified. (2) Before placing radio equipment on the market, a manufacturer must indicate on the radio equipment— (a) the name, registered trade name or registered trade mark of the manufacturer, (b) a postal address at which the manufacturer can be contacted. (3) The information specified in paragraph (2) must be in a language which can be easily understood by end-users and the enforcing authority . (4) Where the size or nature of the radio equipment prohibits a manufacturer from complying with the requirement in paragraph (1) or paragraph (2), the manufacturer must provide the required information either on the radio equipment's packaging or in a document which accompanies the radio equipment. (5) The manufacturer's postal address must indicate a single point at which the manufacturer can be contacted.
Instructions and information to be included with the radio equipment
13
(1) When placing radio equipment on the market, a manufacturer must ensure that radio equipment is accompanied with instructions and safety information which— (a) are clear, legible and in easily understandable English, (b) include information required to use the radio equipment in accordance with its intended use, and (c) include a description of accessories and components, including software, which allow the radio equipment to operate as intended . (d) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (2) In the case of radio equipment which can intentionally emit radio waves, the manufacturer must also include information about— (a) the frequency band or bands in which the radio equipment can operate, and (b) the maximum radio-frequency power transmitted in the frequency band or bands in which the radio equipment operates. (3) When placing radio equipment on the market, a manufacturer must ensure that each item of radio equipment is accompanied by either a copy of the ... declaration of conformity or a simplified ... declaration of conformity drawn up in accordance with regulation 43 (simplified ... declaration of conformity). (4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Information to be included where there are restrictions on putting into service or requirements for authorisation of use
14
(1) Where there are restrictions on putting into service or requirements for authorisation of use in the United Kingdom in respect of the radio equipment, a manufacturer must present information which identifies the types of restrictions on putting into service or requirements for authorisation of use that apply. (2) The information referred to in paragraph (1) must— (a) be completed in the instructions required by regulation 13, (b) ... be presented in the manner and form specified in the Implementing Regulation .... (3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Duty to take action in respect of radio equipment placed on the market which is considered not to be in conformity
15
(1) A manufacturer who considers, or has reason to believe, that radio equipment which they have placed on the market is not in conformity with Part 2, if appropriate, must immediately take the corrective measures necessary to— (a) bring the radio equipment into conformity, (b) withdraw the radio equipment, or (c) recall the radio equipment. (2) Where the radio equipment presents a risk, the manufacturer must immediately inform the market surveillance authority ... of the risk, giving details of— (a) the respect in which the radio equipment is considered not to be in conformity with Part 2, and (b) any corrective measures taken and the results of those measures.
Provision of information and cooperation
16
(1) Following a request from the enforcing authority, the manufacturer must, within such reasonable period as the authority may specify, provide the authority concerned with all the information and documentation necessary to demonstrate that the radio equipment is in conformity with Part 2. (2) A request referred to in paragraph (1)— (a) is one that was made during the period of 10 years beginning on the day that the manufacturer places the radio equipment on the market, and (b) must be accompanied by the reasons for making the request. (3) The information referred to in paragraph (1)— (a) may be provided in electronic form, and (b) must be in a language which can be easily understood by the authority concerned. (4) A manufacturer must, at the request of the authority concerned, cooperate with that authority on any action taken to— (a) evaluate radio equipment in accordance with regulation 59 (evaluation of radio equipment presenting a risk), (b) eliminate the risks posed by radio equipment which the manufacturer has placed on the market.
Compliance procedures for series production
17
(1) A manufacturer must ensure, before placing radio equipment on the market, that procedures are in place to ensure that series production remains in conformity with Part 2. (2) In doing so, the manufacturer must take adequate account of— (a) any change in radio equipment design or characteristics, and (b) any change in a designated standard or in another technical specification by reference to which the ... declaration of conformity was drawn up.
Monitoring
18
(1) When appropriate, with regard to the risks to the health and safety of end-users presented by radio equipment, a manufacturer must— (a) carry out sample testing of radio equipment manufactured by it which has been made available on the market, (b) investigate complaints that radio equipment manufactured by it is not in conformity with Part 2, (c) keep a register of— (i) complaints that radio equipment is not in conformity with Part 2, (ii) radio equipment which is not in conformity with Part 2, and (iii) radio equipment recalls, and (d) keep distributors informed of any monitoring carried out under this regulation. (2) A manufacturer must keep an entry made in the register for a period of at least 10 years beginning on the day on which the obligation to make the entry arose.
Provision of information on compliance of combinations of radio equipment and software
18A
(1) In this regulation “ product ” means a combination of radio equipment and software allowing such radio equipment to be used as intended. (2) The Secretary of State may by regulations make provision requiring a manufacturer of a product to provide the Secretary of State with information on the compliance of the product with the essential requirements. (3) Regulations under paragraph (2) may— (a) specify categories or classes of product for which a manufacturer must provide information on compliance; (b) include requirements as to— (i) the identification of the radio equipment and software intended to be used in combination; (ii) the results of conformity assessment carried out in accordance with regulation 41(conformity assessment procedures); (iii) the form the information must take; (c) make provision for the information on compliance to be made available to the enforcing authorities; and (d) make such supplemental, consequential and transitional provisions as the Secretary of State considers appropriate. (4) Regulations made under paragraph (2) are to be made by statutory instrument subject to annulment in pursuance of a resolution of either House of Parliament.
Power to amend R14(2)(b) and specify how information is to be presented
18B
(1) In this regulation “ product ” means radio equipment types that fall within categories of radio equipment affected by a low level of compliance with the essential requirements. (2) The Secretary of State may by regulations make provision requiring a manufacturer, before placing a product on the market, to— (a) register information on compliance with the essential requirements; and (b) affix to the product a registration number allocated by the Secretary of State. (3) Regulations made under paragraph (2) may specify— (a) the categories or classes of product in respect of which the manufacturer must register information; (b) that some or, where the Secretary of State considers necessary, all of the technical documentation listed in Schedule 5 must be registered; (c) that when setting out a registration process the Secretary of State must take the following matters into account— (i) whether the process includes a central system of registration by manufacturers; (ii) whether the process ensures appropriate control of access to information of a confidential nature; and (iii) whether the process allocates a registration number to each registered radio equipment type. (4) Regulations made under paragraph (2)— (a) may make such supplemental, consequential and transitional provisions as the Secretary of State considers appropriate; and (b) are to be made by statutory instrument subject to annulment in pursuance of a resolution of either House of Parliament.
Power to require registration of radio equipment
18C
(1) The Secretary of State may by regulations— (a) amend regulation 14(2)(b); (b) amend the Implementing Regulation; (c) make provision specifying the manner and form in which information concerning any restrictions or putting into service or requirements for authorisation of use must be presented. (2) Regulations made under paragraph (1)— (a) may make such supplemental, consequential and transitional provisions as the Secretary of State considers appropriate; and (b) are to be made by statutory instrument subject to annulment in pursuance of a resolution of either House of Parliament.
Authorised representatives
19
(1) A manufacturer may, by written mandate, appoint a person established in the United Kingdom as their authorised representative to perform specified tasks on that manufacturer's behalf. (2) The authorised representative must perform the tasks specified in the mandate. (3) The mandate must allow the authorised representative to do at least the following— (a) perform the manufacturer's obligations under regulation 11 (retention of technical documentation and ... declaration of conformity), (b) perform the manufacturer's obligations under regulation 16 (provision of information and cooperation). (4) The mandate must not include the obligations contained in— (a) regulation 7 (design and manufacture in accordance with essential requirements), (b) regulation 9 (technical documentation and conformity assessment), or (c) regulation 10 ( ... declaration of conformity and UK marking). (5) An authorised representative must comply with all the obligations imposed on the manufacturer by these Regulations which relate to the tasks that the authorised representative is appointed by the manufacturer to perform and, accordingly— (a) as far as those obligations are concerned, references in these Regulations to the manufacturer are to be taken as including a reference to the authorised representative, and (b) if the authorised representative contravenes or fails to comply with any of those obligations, the authorised representative may be proceeded against as though the authorised representative was the manufacturer. (6) A manufacturer who has appointed an authorised representative to perform, on the manufacturer's behalf, an obligation under these Regulations remains responsible for the proper performance of that obligation.
Back to The Radio Equipment Regulations 2017 — full text
Provisions on this page are reproduced verbatim from official open data. See the attribution line.
Contains public sector information licensed under the Open Government Licence v3.0 (legislation.gov.uk).