Council Regulation (EC) No 1420/1999 of 29 April 1999 establishing common rules and procedures to apply to shipments to certain non-OECD countries of certain types of waste

• CELEX: Regulation (EC) No 1420/1999
• Articles: 7

Article 1

The export of waste listed in Annex II to Regulation (EEC) No 259/93 and mentioned in Annex A to this Regulation to countries listed in said Annex A shall be prohibited.

Article 2

The control procedure laid down in Article 15 of Regulation (EEC) No 259/93 shall apply to exports to the countries listed in Annex B to this Regulation with respect to those categories of waste destined for recovery only and listed in Annex II to Regulation (EEC) No 259/93.

Article 3

1. Upon request by the country of destination the control procedure applicable to that country under this Regulation shall be amended in accordance with this Article.

2. The Commission shall determine, in accordance with the procedure laid down in Article 18 of Council Directive 75/442/EEC of 15 July 1975 on waste(7), and in cooperation with the country concerned, which of the control procedures shall apply, that is to say:

(i) the procedure applicable to wastes listed in Annex III or Annex IV to Regulation (EEC) No 259/93, or

(ii) the procedure laid down in Article 15 of Regulation (EEC) No 259/93, or

(iii) none of the procedures referred to in paragraphs (i) and (ii) above.

3. The Commission shall inform the Member States of the change of position of a country of destination within 21 days of receipt of the request from that country and shall submit its proposed determination to the Committee established under said Article 18 of Directive 75/442/EEC as soon as possible within three months of receipt of the request.

4. Furthermore, where there is any other exceptional change of circumstances, for example, war, natural disaster or a trade embargo decided by the United Nations, which would affect the control procedure applicable under this Regulation, this control procedure may be amended. The Commission may determine, after consultation with the country of destination, as appropriate, and in accordance with the procedure laid down in Article 18 of Directive 75/442/EEC, which of the procedures referred to in paragraph 2 of this Article shall apply.

5. The Commission shall, in accordance with the procedure laid down in Article 18 of Directive 75/442/EEC, regularly review Annexes A and B of this Regulation, in order to bring them into line with the amendments made to the Annexes to Regulation (EEC) No 259/93.

Article 4

The control procedures established by this Regulation shall be subject to periodic review by the Commission and for the first time no later than nine months following its publication in the Official Journal, taking into account the experience gained. If the results of the review lead to the conclusion that it would be appropriate, the Commission may, without prejudice to the provisions of Article 3, make new proposals to the Council.

Article 5

The Commission, in accordance with the procedure laid down in Article 18 of Directive 75/442/EEC, shall, as soon as possible, review and amend this Regulation in order to bring it into line with Regulation (EEC) No 259/93.

Article 6

This Regulation shall enter into force on the 90th day following that of its publication in the Official Journal of the European Communities.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Luxembourg, 29 April 1999.

For the Council

The President

W. MÜLLER

(1) OJ C 214, 10.7.1998, p. 74.

(2) Opinion delivered on 29 April 1998 (OJ C 169, 16.6.1999).

(3) Opinion of the European Parliament of 17 July 1997 (OJ C 286, 22.9.1997, p. 23), Council common position of 4 June 1998 (OJ C 333, 30.10.1998, p. 1 ) and Decision of the European Parliament of 9 February 1999 (OJ C 250, 28.5.1999).

(4) OJ L 30, 6.2.1993, p. 1. Regulation as last amended by Regulation (EC) No 120/97 (OJ L 22, 24.1.1997, p.14).

(5) OJ L 220, 25.8.1994, p. 15.

(6) OJ L 377, 31.12.11, p. 20. Directive amended by Directive 94/31/EC (OJ L 168, 2.7.1994, p. 28).

(7) OJ L 194, 25.7.1975, p. 39. Directive as last amended by Commission Decision 96/350/EC (OJ L 135, 6.6.1996, p. 32).

Schedules & Appendices

ANNEX A

Countries and territories which have indicated to the Commission that they do not wish to receive shipments for recovery of certain types of waste listed in Annex II to Council Regulation (EEC) No 259/93

ALBANIA

All types except:

1. In Section GA ("Metal and metal-alloy wastes in metallic, no-dispersible form"):

(a) the following ferrous waste and scrap of iron and steel:

>TABLE>

(b) the following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. All types included in section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"):

3. All types included in section GE ("Glass waste in non-dispersible form").

4. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials"):

>TABLE>

5. All types in section GI ("Paper, paperboard and paper product wastes").

6. In section GJ ("Textile wastes"):

>TABLE>

ANDORRA

All types

ANTIGUA and BARBUDA

All types

ARUBA

All types

BAHAMAS

All types

BARBADOS

All types

BELIZE

All types

BHUTAN

All types

BOLIVIA

All types

BOTSWANA

All types

BRAZIL

All types except:

1. In Section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"):

(a) the following ferrous waste and scrap of iron and steel:

>TABLE>

(b) the following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"):

>TABLE>

3. In section GC ("Other wastes containing metals"

[...]

>TABLE>

4. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form").

>TABLE>

5. In section GG ("Other wastes containing principally inorganic constituents, which mas contain metals and organic materials")

>TABLE>

6. In section GH ("Solid plastic wastes"):

>TABLE>

7. In section GJ ("Textile wastes")

>TABLE>

8. In section GK ("Rubber wastes"):

>TABLE>

9. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials"):

>TABLE>

BULGARIA

All types except:

1. In Section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"):

(a) The following waste and scrap of precious metals and their alloys:

>TABLE>

N.B.:

Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams

(b) The following ferrous waste and scrap of iron or steel:

>TABLE>

(c) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"):

>TABLE>

3. In section GC ("Other wastes containing metals")

>TABLE>

4. In section GH ("Solid plastic wastes"):

>TABLE>

5. All types in section GI ("Paper, paperboard and paper product wastes").

BURKINA FASO

All types except:

All types in section GA ("Metal and metal-alloy wastes in metallic, non-disprsible(1) from")

CAMEROON

All types except:

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispesible form")

(a) The following waste and scrap of precious metals and their alloys:

>TABLE>

N.B.

Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams

(b) The following ferrous waste and scrap of iron or steel:

>TABLE>

2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals")

>TABLE>

3. In section GC ("Other wastes containing metals")

>TABLE>

4. In section GE ("Glass waste in non-dispersible form")

>TABLE>

5. In section GF ("Ceramic wastes in non-dispersible form")

>TABLE>

6. In section GH ("Solid plastic wastes")

>TABLE>

7. All types in section GI ("Paper, paperboard and paper product wastes")

8. In section GJ ("Textile wastes")

>TABLE>

9. In section GK ("Rubber wastes")

>TABLE>

10. All types in section GL ("RUntreatea cork and waad wastes")

11. In section GM ("Woetes orisins from agro-food industries")

>TABLE>

CAPE VERDE

All types

COLOMBIA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(2) form"):

All types of waste and scrap of non-ferrous metals and their alloys:

[...]

2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"):

>TABLE>

3. In section GC ("Other wastes containing metals"):

>TABLE>

4. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form"):

>TABLE>

5. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials"):

>TABLE>

6. In section GH ("Solid plastic wastes"):

>TABLE>

7. In section GJ ("Textile wastes"):

>TABLE>

8. In section GK ("Rubber wastes"):

>TABLE>

9. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials"):

>TABLE>

COMOROS, Federal Islamic republic

All types except:

In section GJ ("Textile wastes"):

>TABLE>

COSTA RICA

All types

DOMINICA

All types

DOMINICAN REPUBLIC

All types

DJIBOUTH

All types

EGYPT

All types except:

1. All types in section GA ("Metal and metal-alloy wastes in metallic non-dispersible form").

2. All types in section GI ("Paper, paperboard and paper product wastes").

3. All types in section GJ ("Textile wastes").

FIJI

All types

GAMBIA

All types except:In section GJ ("Textile wastes"):

>TABLE>

GHANA

All types

GRENADA

All types except:In section GK ("Rubber wastes"):

>TABLE>

GUYANA

All types

KIRIBATI

All types

KUWAIT

All types except:In section GH ("Solid plastic wastes"):

>TABLE>

LEBANON

All types except:In section GJ ("Textile wastes"):

>TABLE>

MALAWI

All types excepts:

1. All types in section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form").

2. All types in section GE ("Glass waste in non-dispersible form").

3. All types in section GI ("Paper, paperboard and paper product wastes").

4. In section GJ ("Textile wastes"):

>TABLE>

MALDIVES

All types

MALI

1. In section GA ("Metal and metal-alloy wastes in metallic, non dispersible(3) form")

All types of waste and scrap of non-ferrous metals and their alloys.

2. All types in section GE ("Glass waste in non-dispersible form").

3. All types in section GF ("Ceramic wastes in non-dispersible form")

4. All types in section GH ("Solid plastic wastes")

5. All types in section GN ("Wastes arising from tanning and fellmongery operations and leather use")

MOLDOVA

All types

MONGOLIA

All types

MYANMAR

All types

NICRAGUA

All types

NIGER

All types except:

1. In section GJ ("Textile wastes")

>TABLE>

2. In section GK ("Rubber wastes")

>TABLE>

NIGERIA

All types except:All types in section GH ("Solid plastic wastes")

PAKISTAN

1. In section GK ("Rubber wastes"):

>TABLE>

2. In section GM ("Wastes arising from agro-food industries"):

>TABLE>

3. In section GN ("Wastes arising from tanning and fellmongery operations and leather use"):

>TABLE>

PAPUA NEW GUINEA

All types

PARAGUAY

All types except:

1. All types included in section GI ("Paper, paperboard and paper product wastes")

2. In section GJ ("Textile wastes"):

>TABLE>

3. In section GL ("Untreated cork and wood wastes"):

>TABLE>

PERU

All types

SÃO TOME AND PRINCIPE

All types except:

1. In section GJ ("Textile wastes"):

>TABLE>

2. In section GK ("Rubber wastes"):

>TABLE>

SAUDIA ARABIA

All types

SENEGAL

All types

SEYCHELLES

All types

SINGAPORE

All types except:

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"):

(a) The following waste and scrap of precious metals and their alloys:

>TABLE>

N.B.:

Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams

(b) the following ferrous waste and scrap of iron or steel:

>TABLE>

(c) the following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GC ("Other wastes containing metals"):

>TABLE>

3. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form"):

>TABLE>

4. In section GH ("Solid plastic wastes"):

>TABLE>

ST. KITTS AND NEVIS

All types

ST LUCIA

All types

ST VINCENT AND THE GRENADINES

All types

TANZANIA

All types except:In section GJ ("Textile wastes"):

>TABLE>

UGANDA

All types except:

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form")

>TABLE>

2. In section GJ ("Textile wastes")

>TABLE>

TUVALU

All types

VANUATU

All types

WESTERN SAMOA

All types

(1) 'Non-dispersible'does not include any wates in the gorin of powder, siudse, dust or solid items containing encased hazrdons waste liquids.

(2) 'Non-dispersible'does not include any wates in the gorin of powder, siudse, dust or solid items containing encased hazrdons waste liquids.

(3) 'Non-dispersible'does not include any wates in the gorin of powder, siudse, dust or solid items containing encased hazrdons waste liquids.

ANNEX B

Countries and territories which have not responded to the Commission's communications on shipments for recovery of certain types of waste listed in Annex II to Council Regulation (EEC) No 259/93

AFGHANISTAN

All types

ALGERIA

All types

ANGOLA

All types except:

1. All types in section GA ("Metal and metal alloy wastes in metallic, non-dispersible form").

2. All types in section GE ("Glass wastes in non-dispersible form").

3. All types in section GI ("Paper, paperboard and paper product wastes").

4. All types in section GJ ("Textile wastes").

5. All types in section GK ("Rubber wastes").

ARMENIA

All types

AZERBAIJAN

All types

BAHRAIN

All types

BANGLADESH

All types

BRUNEI

All types

BURUNDI

All types

CAMBODIA

All types

ECUADOR

All types

EL SALVADOR

All types

EQUATORIAL GUINEA

All types

ERITREA

All types

ETHIOPIA

All types

FORMER YUGOSLAV REPUBLIC OF MACEDONIA

All types

GABON

All types

GUATEMALA

All types

GUINEA

All types except:

In section GJ ("Textile wastes"):

>TABLE>

HAITI

All types

HONDURAS

All types

IVORY COAST

All types

KAZAKHSTAN

All types

KYRGYSTAN

All types

LAOS

All types

LESOTHO

All types

MOROCCO

All types

MOZAMBIQUE

All types

NAMIBIA

All types

NEPAL

All types

OMAN

All types

PANAMA

All types

QATAR

All types

RUSSIAN FEDERATION

All types except:

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"):

(a) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals"):

>TABLE>

3. In section GC ("Other wastes containing metals"):

>TABLE>

4. In section GD ("Waste from mining operations: these wastes to be in non-dispersible form"):

>TABLE>

5. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic metals"):

>TABLE>

6. All types included in section GH ("Solid plastic wastes").

7. In section GJ ("Textile wastes"):

>TABLE>

8. All types included in section GK ("Rubber wastes").

9. In section GM ("Wastes arising from agro-food industries"):

>TABLE>

10. In section GN ("Wastes arising from tanning and fellmongery operations and leather use"):

>TABLE>

11. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials"):

>TABLE>

SOLOMON ISLANDS

All types

SUDAN

All types

SWAZILAND

All types

SYRIA

All types

TAJIKISTAN

All types

TONGA

All types

TUNISIA

All types in Annex II except:

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form"):

(a) The following ferrous waste and scrap of iron and steel:

>TABLE>

(b) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GC ("Other wastes containing metals"):

>TABLE>

3. All types in section GH ("Solid plastic wastes").

4. All types in section GI ("Paper, paperboard and paper product wastes").

5. In section GJ ("Textile wastes"):

>TABLE>

6. All types in section GK ("Rubber wastes").

7. In section GM ("Wastes arising from agro-food industries"):

>TABLE>

8. In section GN ("Wastes arising from tanning and fellmongery operations and leather use")

>TABLE>

TURKMENISTAN

All types

UZBEKISTAN

All types

VATICAN CITY

All types

VENEZUELA

All types

VIETNAM

All types

YEMEN

All types

ZIMBABWE

All types