INFORMATION REQUIRED FOR IDENTIFICATION IN ACCORDANCE WITH ARTICLE 3 OR INDICATION IN ACCORDANCE WITH ARTICLE 8(3) OR (4)
1. Identity of the identifier(1) etc.:
1.1. Name and address etc. of the identifier and his status as producer, formulator or Member State.
1.2. If the identifier is a producer who is not the manufacturer of the active substance: the authorisation by the manufacturer of the identifier to act as his sole representative within the Community.
1.3. If the identifier is not the manufacturer of the active substance: the name and address of that manufacturer.
2. Identity of the substance:
2.1. Common name proposed or accepted by ISO and synonyms.
2.2. Chemical name (IUPAC nomenclature).
2.3. Manufacturer's development code number(s) (if available).
2.4. CAS and EC numbers.
2.5. Molecular and structural formula (including full details of any isomeric composition), molecular mass.
2.6. Specification of purity of the active substance in g/kg or g/l, as appropriate.
3. Proof that the substance was already on the market as an active substance of a biocidal product before 14 May 2000. Apart from EC number also evidence that the substance was used as an active substance in at least one biocidal product, e.g. in form of an invoice ant the composition of a product and/or a label.
4. Member States where the active substance is placed on the market. For basic substances the Member States where the basic substance is used.
5. If the identifier is a producer: average annual quantities of the active substance placed on the market for the years 1998-2000 per product type according to Annex V to the Directive. If relevant, quantities shall be specified by subgroup as listed below. If statistics are not available, estimation shall be sufficient.
6. By way of derogation from paragraph 5 for potential basic substances: annual quantities placed on the market in total and used as biocidal products per product type according to Annex V to the Directive. If relevant the quantities shall be specified by subgroups as listed below.
Product type according to Annex V to the Directive and subgroups relevant for the priority setting
Product type 1: Human hygiene biocidal products
Product type 2: Private area and public health area disinfectants and other biocidal products
2.01. Disinfectants for medical equipment, biocidal products for accommodation for man or in industrial areas
2.02. Biocidal products to be used in swimming pools etc.
2.03. Biocidal products to be used in air-conditioning system
2.04. Biocidal products for chemical toilets, treatment of waste water or treatment of hospital waste.
2.05. Other biocidal products within product type 2
Product type 3: Veterinary hygiene biocidal products
Product type 4: Food and feed area disinfectants
Product type 5: Drinking water disinfectants
Product type 6: In-can preservatives
6.01. Preservatives for detergents
6.02. Other in-can preservatives
Product type 7: Film preservatives
Product type 8: Wood preservatives
8.01. Pre-treatment in industrial premises (pressure and vacuum impregnation and dipping)
8.02. Other wood preservatives
Product type 9: Fibre, leather, rubber and polymerised materials preservatives
9.01. Preservatives for textiles and leather
9.02. Preservatives for paper
9.03. Preservatives for rubber and polymerised materials and other biocidal products covered by product type 09
Product type 10: Masonry preservatives
Product type 11: Preservatives for liquid-cooling and processing systems
11.01. Preservatives used in once-through systems
11.02. Preservatives used in recirculating systems
Product type 12: Slimicides
12.01. Slimicides for paperpulp
12.02. Slimicides for mineral oil extraction
12.03. Other slimicides
Product type 13: Metalworking-fluid preservatives
Product type 14: Rodenticides
Product type 15: Avicides
Product type 16: Molluscicides
Product type 17: Piscicides
Product type 18: Insecticides, acaricides and products to control other arthropods
18.01. Used by professionals
18.02. Used by non-professionals
Product type 19: Repellents and attractants
19.01. Repellents applied directly on human or animal skin
19.02. Attractants and repellents not applied directly on human or animal skin
Product type 20: Preservatives for food or feedstocks
Product type 21: Anti-fouling products
Product type 22: Embalming and taxidermist fluids
Product type 23: Control of other vertebrate
(1) In the case of identification in accordance with Article 5 or indication in accordance with Article 8: the identity of the Member State.
ANNEX II
INFORMATION REQUIRED FOR NOTIFICATION IN ACCORDANCE WITH ARTICLE 4 OR ARTICLE 8(1)
1. Product type(s) according to Annex V to the Directive for which the notification is submitted.
2. Summary studies, information, relevant endpoints and information on the date of completion of ongoing or committed studies as specified in Table 1 of Annex II. Only information which has to be included in the complete dossier for the use and the nature of the biocidal product shall be submitted.
3. Proof that the substance was already on the market as an active substance of a biocidal product before 14 May 2000. Apart from EC number also evidence that the substance was used as an active substance in at least one biocidal product, e.g. in form of an invoice and the composition of a product and/or a label.
4. Member States where the active substance is placed on the market. For substances applied for as basic substances the Member States where the basic substance is used.
5. If the identifier is a producer. The information shall also include information on quantities in product types not notified:
(a) average annual quantities of the active substance placed on the market for the years 1998-2000 per product type according to Annex V to the Directive. If relevant, quantities shall be specified by subgroup as listed in Annex I. If statistics are not available, estimation shall be sufficient;
(b) an estimation of the notifier's market share percentage for the years 1998-2000 in the EU of:
(i) the total use of the active substance for that product type, if relevant specified by subgroups; and of
(ii) the total use of the substance within the EU.
6. By way of derogation from paragraph 5 for potential basic substances: annual quantities placed on the market in total and used as biocidal products per product type according to Annex V to the Directive and subgroups as listed in Annex I.
7. Declaration confirming that the information provided is honest and correct and that the notifier commits to submit to the competent authorities of the designated reporting Member State the complete dossiers according to Article 11(1)(a) of the Directive within the time period laid down by the Commission. He confirms that the information submitted the notification is based on studies which are available to the notifier and which will be submitted to the rapporteur Member State as part of the dossier referred to in Article 11(1).
Table£>TABLE>