ANNEX XVI附則
ANNEX XVI Identification and marking of high-activity sealed sources as referred to in Article 91 1. The manufacturer or supplier ensures that: (a) Each high-activity sealed source is identified by a unique number. This number shall be engraved or stamped on the source, where practicable. The number shall also be engraved or stamped on the source container. If this is not feasible, or in the case of reusable transport containers, the source container shall, at least, bear information on the nature of the source. (b) The source container and, where practicable, the source are marked and labelled with an appropriate sign to warn people of the radiation hazard. 2. The manufacturer provides a photograph of each manufactured source design type and a photograph of the typical source container. 3. The undertaking ensures that each high-activity sealed source is accompanied by written information indicating that the source is identified and marked in compliance with point 1 and that the markings and labels referred to in point 1 remain legible. The information shall include photographs of the source, source container, transport packaging, device and equipment as appropriate.