Citation and commencement
1
These Regulations may be cited as the Simple Pressure Vessels (Safety) Regulations 2016 and come into force on 8th December 2016 (“ the commencement date ”).
The Simple Pressure Vessels (Safety) Regulations 2016 PART 1
Interpretation
2
(1) In these Regulations, “ vessel ” means a simple pressure vessel manufactured in series with the following characteristics— (a) the vessel is welded, intended to be subjected to an internal gauge pressure greater than 0.5 bar and to contain air or nitrogen, and is not intended to be fired; (b) the parts and assemblies contributing to the strength of the vessel under pressure are made either of non-alloy quality steel or of non-alloy aluminium or non-age hardening aluminium alloys; (c) the vessel is made of either of the following elements— (i) a cylindrical part of circular cross-section closed by outwardly dished and/or flat ends which revolve around the same axis as the cylindrical part; (ii) two dished ends revolving around the same axis; (d) the maximum working pressure of the vessel does not exceed 30 bar and the product of PS x V does not exceed 10,000 bar.L; and (e) the minimum working temperature of the vessel is no lower than -50°C and the maximum working temperature is not higher than— (i) 300°C where the vessel is constructed of steel; and (ii) 100°C where the vessel is constructed of aluminium or aluminium alloy vessels. (2) A vessel is manufactured in series if more than one vessel of the same type is manufactured during a given period by a continuous manufacturing process, in accordance with a common design and using the same manufacturing processes. (3) The categories of vessels relevant for the purposes of these Regulations are— (a) “category A vessel”, meaning a vessel of which the product of PS x V exceeds 50 bar.L, this category being subdivided into— (i) “category A.1 vessel”, meaning a vessel of which the product of PS x V exceeds 3,000 bar.L; (ii) “category A.2 vessel”, meaning a vessel of which the product of PS x V is more than 200 bar.L but not more than 3,000 bar.L; (iii) “category A.3 vessel” meaning a vessel of which the product of PS x V is more than 50 bar.L but not more than 200 bar.L; and (b) “category B vessel” meaning a vessel of which the product of PS x V is 50 bar.L or less. (4) In these Regulations— “ the 1991 Regulations ” means the Simple Pressure Vessels (Safety) Regulations 1991 ; “ the 1974 Act ” means the Health and Safety at Work etc Act 1974 ; “ the 1978 Order ” means the Health and Safety at Work (Northern Ireland) Order 1978; “ the 1987 Act ” means the Consumer Protection Act 1987 ; “ approved body ” has the meaning given to it in regulation 45 (approved bodies); ... ... “ authorised representative ” means a person established in the United Kingdom appointed in accordance with regulation 15; ... ... “ conformity assessment ” means the process demonstrating whether the essential safety requirements relating to a vessel have been fulfilled; “ conformity assessment activities ” means any activities connected with conformity assessment, including calibration, testing, certification and inspection; “ conformity assessment body ” means a body that performs conformity assessment activities; “ conformity assessment procedure ” means a procedure referred to in regulations 40 (conformity assessment procedures prior to manufacture) and 41(conformity assessment procedures prior to placing a vessel on the market); “ designated standard ” has the meaning given to it in regulation 2A; “ the Directive ” means Directive 2014/29/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of simple pressure vessels ...; “ distributor ” means any person in the supply chain, other than the manufacturer or the importer, who makes a vessel available on the market; “ district council ” means a district council within the meaning of the Local Government Act (Northern Ireland) 1972 ; “ economic operator ” means a manufacturer, an authorised representative, an importer or a distributor; “ enforcing authority ” means any person enforcing these Regulations under regulation 55 (enforcement); “ essential safety requirements ” means the requirements set out in Schedule 1; ... “ the HSE ” means the Health and Safety Executive established under section 10 of the 1974 Act; “ the HSE NI ” means the Health and Safety Executive for Northern Ireland established under Article 12 of the 1978 Order; “ importer ” means a person who— is established in the United Kingdom and places a vessel from a country outside of the United Kingdom on the market; or is established in Northern Ireland and places a vessel on the market that has been supplied to them for distribution, consumption or use in the course of a commercial activity, whether in return for payment or free of charge, from an EEA state; “ inscriptions ” means the following information in respect of a vessel— the maximum working pressure (PS); the maximum working temperature (T max ); the minimum working temperature (T min ); and the capacity (V); “ instructions and safety information ” means the following information in respect of a vessel— its intended use; and the maintenance and installation requirements for vessel safety; “ make available on the market ” means any supply of a vessel for distribution or use on the market of Great Britain in the course of a commercial activity, whether in return for payment or free of charge, and related expressions must be construed accordingly; “ manufacturer ” means a person who— manufactures a vessel or has a vessel designed or manufactured; and markets that vessel under that person's name or trademark; “ market surveillance authority ” has the meaning set out in regulation 54 (designation of market surveillance authority); “maximum working pressure” or “ PS ” means the maximum gauge pressure (in Bar) which may be exerted under a vessel's normal conditions of use; “maximum working temperature” or “ T max ” means the highest stabilised temperature (in °C) which the wall of the vessel may attain under normal conditions of use; “minimum working temperature or “ T min ” means the lowest stabilised temperature which the wall of the vessel may attain under normal conditions of use; ... ... ... ... “ place on the market ” means the first making available of a vessel on the market of Great Britain , and related expressions must be construed accordingly; “ place on the market ” means the first making available of a vessel on the EU market, and related expressions must be construed accordingly; RAMS means Regulation ( EC ) No 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation ( EEC ) No 339/93 ; “ recall ” means any measure aimed at achieving the return of a vessel that has already been made available to the end-user and related expressions must be construed accordingly; “ relevant economic operator ” means, in relation to a vessel, an economic operator who has obligations in respect of that vessel under Part 2 of these Regulations; “ supply ” is to be read in accordance with section 46 of the 1987 Act, and includes offering or agreeing to supply, and exposing or possessing for supply, and “supplied” and “supplier” have the corresponding meanings; “ technical documentation ” means the documentation referred to in paragraph 2(2)(c) of Part 1 of Schedule 2; “ technical specification ” means a document that prescribes technical requirements to be fulfilled by a vessel; “ UK marking ” means the marking in the form set out in Annex 2 of RAMS; “ UK national accreditation body ” means the body appointed by the Secretary of State in accordance with Article 4 of RAMS; “ V ” means capacity of the vessel in litres; “ weights and measures authority ” means a local weights and measures authority as defined in section 69 of the Weights and Measures Act 1985 ; “ withdraw ”, in relation to a vessel, means any measure aimed at preventing a vessel in the supply chain from being made available on the market and related expressions must be construed accordingly. (5) In these Regulations, a reference to a vessel being “ in conformity with Part 2 ” means that— (a) the vessel complies with the essential safety requirements; and (b) is a vessel in respect of which each relevant economic operator has complied, or is complying, with the obligations imposed on them under Part 2 of these Regulations. (6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Designated standard
2A
(1) Subject to paragraphs (6) and (7), in these Regulations a “ designated standard ” means a technical specification which is— (a) adopted by a recognised standardisation body or an international standardising body , for repeated or continuous application, with which compliance is not compulsory; and (b) designated by the Secretary of State by publishing the reference to the standard and maintaining that publication in a manner the Secretary of State considers appropriate. (2) For the purposes of paragraph (1), a “ technical specification ” means a document that prescribes technical requirements to be fulfilled by a product, process, service or system and which lays down one or more of the following— (a) the characteristics required of a product, including— (i) levels of quality, performance, interoperability, environmental protection, health, safety or dimensions, and (ii) the requirements applicable to the product as regards the name under which the product is sold, terminology, symbols, testing and test methods, packaging, marking or labelling and conformity assessment procedures; and (b) production methods and processes relating to the product, where these have an effect on the characteristics of the product. (3) For the purposes of this regulation a “ recognised standardisation body ” means any one of the following organisations— (a) the European Committee for Standardisation (CEN); (b) the European Committee for Electrotechnical Standardisation (Cenelec); (c) the European Telecommunications Standards Institute (ETSI); (d) the British Standards Institution (BSI). (3A) In this regulation “ international standardising body ” has the same meaning as it has for the purposes of the Agreement on Technical Barriers to Trade, part of Annex 1A to the agreement establishing the World Trade Organisation signed at Marrakesh on 15 April 1994 (as modified from time to time). (4) When considering whether the manner of publication of a reference is appropriate in accordance with paragraph (1)(b), the Secretary of State must have regard to whether the publication will draw the standard to the attention of any person who may have an interest in the standard. (5) Before publishing the reference to a technical specification adopted by the British Standards Institution, the Secretary of State must have regard to whether the technical specification is consistent with such technical specifications adopted by the other recognised standardisation bodies or by international standardising bodies as the Secretary of State considers to be relevant. (6) The Secretary of State may remove from publication the reference to a standard which has been published in accordance with paragraph (1)(b). (7) Where the Secretary of State removes the reference to a standard from publication, that standard is no longer a designated standard. (8) In this regulation, a reference to a “ product ” is a reference to a vessel to which these Regulations apply. (9) The Secretary of State may by regulations amend paragraph (3) to reflect any changes in the name or structure of the recognised standardisation bodies. (10) Regulations made under paragraph (9) are to be made by statutory instrument. (11) A statutory instrument containing regulations made under paragraph (9) is subject to annulment in pursuance of a resolution of either House of Parliament.
Application
3
(1) Subject to paragraph 2, these Regulations apply to a vessel placed on the market on or after the commencement date. (2) These Regulations do not apply to— (a) a vessel specifically designed for nuclear use, failure of which may cause an emission of radioactivity; (b) a vessel specifically intended for installation in or the propulsion of ships and aircraft; and (c) fire extinguishers. (3) In paragraph (2), “ ship ” has the meaning given by section 313 of the Merchant Shipping Act 1995 .
Back to The Simple Pressure Vessels (Safety) Regulations 2016 — full text
Provisions on this page are reproduced verbatim from official open data. See the attribution line.
Contains public sector information licensed under the Open Government Licence v3.0 (legislation.gov.uk).