Sch 2 para 3
(1) The technical documentation referred to in paragraph 2(2)(c) must— (a) make it possible to assess the vessel's conformity with the applicable requirements of these Regulations and must include an adequate analysis and assessment of any risks; (b) specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and operation of the vessel; (c) contain, wherever applicable, at least the following elements— (i) a general description of the vessel; (ii) conceptual design and manufacturing drawings and schemes of components; (iii) descriptions and explanations necessary for the understanding of those drawings and schemes and the operation of the vessel; (iv) a list of the designated standards applied in full or in part (where applicable specifying the parts which have been applied) ...; (v) where designated standards have not been applied, descriptions of the solutions adopted to meet the essential safety requirements, including a list of other relevant technical specifications applied; (vi) results of design calculations made and examinations carried out; (vii) test reports; (viii) the instructions and safety information; (ix) A document describing— (aa) the materials selected; (bb) the welding processes selected; (cc) the checks selected; and (dd) any pertinent details as to the vessel design. (2) Where a prototype vessel is examined, the technical documentation must also include— (a) the certificates relating to the suitable qualification of the welding operations and of the welders or welding operators; (b) the inspection slip for the materials used in the manufacture of parts and components contributing to the strength of the vessel; (c) a report on the examination and tests performed or a description of the proposed checks.