The Plastic Materials and Articles in Contact with Food (Amendment) (No. 2) Regulations 1996

• Citation: S.I. 1996/2817
• Sections: 2

Section 1 Title, commencement and interpretation

(1) These Regulations may be cited as the Plastic Materials and Articles in Contact with Food (Amendment) (No. 2) Regulations 1996 and shall come into force on 1st January 1997.

(2) In these Regulations “the principal Regulations ” means the Plastic Materials and Articles in Contact with Food Regulations 1992.

Section 2 Amendment of the principal Regulations

The principal Regulations shall be amended as follows:

(a) in the definition of “the Directive” in regulation 2(1), for the words “as amended” there shall be substituted the words “, (as corrected) and as amended by Commission Directives 92/39/ EEC , 93/9/EEC , 95/3/ EC and 96/11/EC ”;

(b) in regulation 5 (monomers) —

(i) in paragraph (1) —

(A) after the words “the following paragraphs of this regulation” there shall be inserted the words “and regulation 14A”,

(B) in sub-paragraph (a), for the date “1st January 1997” there shall be substituted the date “1st January 2002”, and

(C) in sub-paragraph (b), for the date “31st December 1996” there shall be substituted the date “31st December 2001”;

(ii) in paragraphs (3), (4), (5) and (6), after the words “the relevant fraction of”(wherever they occur) there shall be added the words “, or section F of,”;

(c) after regulation 14 there shall be inserted the following regulation —

Manufacture until 1st January l999

(14A) Notwithstanding regulation 5(1),until lst January 1999 a plastic material or article may be manufactured using one or more of the monomers identified by PM/REF No., CAS No. (if any) and name respectively in columns 1, 2, 3 of Section F of Part I of Schedule l, if any such monomer is of good technical quality and is used in accordance with the restrictions (if any) specified in the corresponding entry in column 4 thereof.

(d) the Item number and letter, PM/REF No., CAS No. and name for each monomer identified in Schedule 1 to these Regulations shall be inserted in Section A of Part 1 of Schedule 1 (monomers authorised without time limit) at the place corresponding to the number and letter specified for that monomer in the column headed “Item” in Schedule l to these Regulations;

(e) the contents of Schedule 2 to these Regulations shall be substituted for Section B of Part 1 of Schedule 1;

(f) in Section D of Part 1 of Schedule l (monomers authorised until 1st April 1996), in Item 16, for the figures “51” and “115” in column 4 (restrictions) there shall be substituted the figures “17” and “58” respectively;

(g) the contents of Schedule 3 to these Regulations shall be inserted after Section E of Part 1 of Schedule 1; and

(h) the Item number and letter, PM/REF No., CAS No. (if any) and name for each additive identified in Schedule 4 to these Regulations shall be inserted in Part I of Schedule 3 (additives) at the place corresponding to the number and letter specified for that additive in the column headed “Item” in Schedule 4 to these Regulations.