The Smoke Control Areas (Exempted Fireplaces) (England) Order 2005

• Citation: S.I. 2005/2304
• Sections: 21

Section 1 Citation, commencement and extent

(1) This Order may be cited as the Smoke Control Areas (Exempted Fireplaces) (England) Order 2005 and shall come into force on 1 st October 2005.

(2) This Order applies to England only .

Section 2 Classes of fireplace exempted from section 20 of the Clean Air Act 1993

The classes of fireplace described in the Schedule shall, upon the conditions there specified, be exempted from the provisions of section 20 (prohibition on emission of smoke in smoke control area) of the Clean Air Act 1993.

Section 3 Amendment of the Smoke Control Areas (Exempted Fireplaces) Order 1999

In the entry relating to the Dunsley Yorkshire Stove in the Schedule to the Smoke Control Areas (Exempted Fireplaces) Order 1999 —

(a) for the description “The Dunsley Yorkshire Stove manufactured by Dunsley Heat Limited”, substitute the description “The Dunsley Yorkshire Stove, the Dunsley Yorkshire Multifuel Stove and the Dunsley Yorkshire Multifuel Stove and Boiler manufactured by Dunsley Heat Limited”;

(b) after the words “reference “A/22160”” at the end of paragraph 1 of the Conditions, insert the words “as amended by the manufacturer’s instructions dated 4th December 2004 bearing the reference “D13” with regard to the Stove and Multifuel Stove, and by the manufacturer’s instructions dated 4th October 2004 bearing the reference GHD/DUN4B/1 with regard to the Multifuel Stove and Boiler”.

Section 1

The fireplaces shall be installed, maintained and operated in accordance with the manufacturer’s instructions dated 9th October 2003 and bearing the reference 250-6931B.

Section 1

The fireplaces shall be installed, maintained and operated in accordance with the manufacturer’s instructions dated 4th June 2003 and bearing the reference 7004-187.

Section 1

The fireplaces shall be installed, maintained and operated in accordance with the manufacturer’s instructions dated 8th July 2003 and bearing the reference 7006-186.

Section 1

The fireplaces shall be installed, maintained and operated in accordance with the manufacturer’s instructions dated 25th October 2004 and bearing the references:

Section 1

The fireplaces shall be installed, maintained and operated in accordance with the manufacturer’s instructions dated 4th December 2004 and bearing the reference D13W.

Section 1

The fireplaces shall be installed, maintained and operated in accordance with the manufacturer’s instructions dated 4th December 2004 and bearing the reference D13W together with the manufacturer’s instructions dated 4th October 2004 and bearing the reference GHD/DUN4B/1.

Section 1

The fireplaces shall be installed, maintained and operated in accordance with the manufacturer’s instructions dated 19th January 2005 and bearing the reference WT10 and WT15.

Section 1

The fireplaces shall be installed, maintained and operated in accordance with the manufacturer’s and Wood Energy Limited’s instructions entitled Binder Equipment Installation, Commissioning and Maintenance dated 17th May 2005 and bearing the reference WELBinderManualrev0.doc, revision 0.

Section 1

The fireplaces shall be installed, maintained and operated in accordance with the manufacturer’s and Wood Energy Limited’s instructions entitled ‘Binder Equipment Installation, Commissioning and Maintenance dated 17th May 2005 and bearing the reference WELBinderManualrev0.doc, revision 0.

Section 2

No fuel shall be used other than dry cured untreated wood of maximum size 38.1cm × 10.16cm × 5.08cm.

Section 2

No fuel shall be used other than dry cured untreated wood of maximum size 38.1cm × 10.16cm × 5.08cm.

Section 2

No fuel shall be used other than dry cured untreated wood of maximum size 43.18cm × 10.16cm × 10.16cm.

Section 2

No fuel shall be used other than untreated dry wood.

Section 2

No fuel shall be used other than untreated dry wood.

Section 2

No fuel shall be used other than untreated dry wood.

Section 2

No fuel shall be used other than hardwood and softwood offcuts, but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood-preservatives or coatings and, in particular, wood waste originating from construction and demolition waste.

Section 2

No fuel shall be used other than wood pellets or wood chips, but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood-preservatives or coatings and, in particular, wood waste originating from construction and demolition waste.

Section 2

No fuel shall be used other than wood pellets or wood chips, but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood-preservatives or coatings and, in particular, wood waste originating from construction and demolition waste.