SAFETY STANDARD FOR BEDSIDE SLEEPERS

• Citation: 16 CFR Part 1222
• Sections: 2

§ 1222.1 Scope.

This part establishes a consumer product safety standard for bedside sleepers.

§ 1222.2 Requirements for bedside sleepers.

(a) Except as provided in paragraph (b) of this section, each bedside sleeper shall comply with all applicable provisions of ASTM F2906-23, Standard Consumer Safety Specification for Bedside Sleepers, approved on January 1, 2023. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. This material is available for inspection at the U.S. Consumer Product Safety Commission and at the National Archives and Records Administration (NARA). Contact the U.S. Consumer Product Safety Commission at: the Office of the Secretary, U.S. Consumer Product Safety Commission, 4330 East West Highway, Bethesda, MD 20814, telephone [phone], email: [email protected]. For information on the availability of this material at NARA, email [email protected], or go to: www.archives.gov/federal-register/cfr/ibr-locations.html. A free, read-only copy of the standard is available for viewing on the ASTM website at https://www.astm.org/READINGLIBRARY/. You may also obtain a copy from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; phone: [phone]; www.astm.org.

(b) Each bedside sleeper shall comply with the ASTM F2906-23 standard except in sections 2.1, 5.1, 5.6, 7.1, and 8.1 of ASTM F2906-23, replace both “F2194 Consumer Safety Specification for Bassinets and Cradles” and “Consumer Specification F2194,” with “16 CFR part 1218 Safety Standard for Bassinets and Cradles.”