MODERNIZED DRAWBACK

• Citation: 19 CFR Part 190
• Sections: 108

§ 190.0a Claims filed under NAFTA and USMCA.

Claims for drawback filed under the provisions of part 181 or part 182 of this chapter must be filed separately from claims filed under the provisions of this part.

§ 190.1 Authority of the Commissioner of CBP.

Pursuant to DHS Delegation number 7010.3, the Commissioner of CBP has the authority to prescribe, and pursuant to Treasury Order No. 100-16 (set forth in the appendix to part 0 of this chapter), the Secretary of the Treasury has the sole authority to approve, rules and regulations regarding drawback.

§ 190.2 Definitions.

For the purposes of this part:

Abstract. Abstract means the summary of the actual production records of the manufacturer.

Act. Act, unless indicated otherwise, means the Tariff Act of 1930, as amended.

Bill of materials. Bill of materials refers to a record that identifies each component incorporated into a manufactured or produced article (and includes components used in the manufacturing or production process). This may include a record kept in the normal course of business.

Designated merchandise. Designated merchandise means either eligible imported duty-paid merchandise or drawback products selected by the drawback claimant as the basis for a drawback claim under 19 U.S.C. 1313(b) or (j)(2), as applicable, or qualified articles selected by the claimant as the basis for drawback under 19 U.S.C. 1313(p).

Destruction. Destruction means the destruction of articles or merchandise to the extent that they have no commercial value. For purposes of 19 U.S.C. 1313(a), (b), (c), and (j), destruction also includes a process by which materials are recovered from imported merchandise or from an article manufactured from imported merchandise, as provided for in 19 U.S.C. 1313(x).

Direct identification drawback. Direct identification drawback includes drawback authorized pursuant to section 313(j)(1) of the Act, as amended (19 U.S.C. 1313(j)(1)), on imported merchandise exported, or destroyed under CBP supervision, without having been used in the United States ( see also sections 313(c), (e), (f), (g), (h), and (q)). Direct identification is involved in manufacturing drawback pursuant to section 313(a) of the Act, as amended (19 U.S.C. 1313(a)), on imported merchandise used to manufacture or produce an article which is either exported or destroyed. Merchandise or articles may be identified for purposes of direct identification drawback by use of the accounting methods provided for in § 190.14.

Document. In this part, document has its normal meaning and includes information input into and contained within an electronic data field, and electronic versions of hard-copy documents.

Drawback. Drawback, as authorized for payment by CBP, means the refund, in whole or in part, of the duties, taxes, and/or fees paid on imported merchandise, which were imposed under Federal law upon entry or importation, and the refund of internal revenue taxes paid on domestic alcohol as prescribed in 19 U.S.C. 1313(d). More broadly, drawback also includes the refund or remission of other excise taxes pursuant to other provisions of law.

Drawback claim. Drawback claim, as authorized for payment by CBP, means the drawback entry and related documents required by regulation which together constitute the request for drawback payment. All drawback claims must be filed electronically through a CBP-authorized Electronic Data Interchange system. More broadly, drawback claim also includes claims for refund or remission of other excise taxes pursuant to other provisions of law.

Drawback entry. Drawback entry means the document containing a description of, and other required information concerning, the exported or destroyed article upon which a drawback claim is based and the designated imported merchandise for which drawback of the duties, taxes, and fees paid upon importation is claimed. Drawback entries must be filed electronically.

Drawback office. Drawback office means any of the locations where drawback claims and related applications or requests may be submitted. CBP may, in its discretion, transfer or share work between the different drawback offices even though the submission may have been to a particular office.

Drawback product. A drawback product means a finished or partially finished product manufactured in the United States under the procedures in this part for manufacturing drawback. A drawback product may be exported, or destroyed under CBP supervision with a claim for drawback, or it may be used in the further manufacture of other drawback products by manufacturers or producers operating under the procedures in this part for manufacturing drawback, in which case drawback may be claimed upon exportation or destruction of the ultimate product. Products manufactured or produced from substituted merchandise (imported or domestic) also become “drawback products” when applicable substitution requirements of the Act are met. For purposes of section 313(b) of the Act, as amended (19 U.S.C. 1313(b)), drawback products may be designated as the basis for drawback or deemed to be substituted merchandise ( see 19 U.S.C. 1313(b)). For a drawback product to be designated as the basis for a drawback claim, any transfer of the product must be properly documented ( see § 190.24).

Exportation. Exportation means the severance of goods from the mass of goods belonging to this country, with the intention of uniting them with the mass of goods belonging to some foreign country. An exportation may be deemed to have occurred when goods subject to drawback are admitted into a foreign trade zone in zone-restricted status, or are laden upon qualifying aircraft or vessels as aircraft or vessel supplies in accordance with section 309(b) of the Act, as amended (19 U.S.C. 1309(b)) ( see §§ 10.59 through 10.65 of this chapter).

Exporter. Exporter means that person who, as the principal party in interest in the export transaction, has the power and responsibility for determining and controlling the sending of the items out of the United States. In the case of “deemed exportations” ( see definition of exportation in this section), exporter means that person who, as the principal party in interest in the transaction deemed to be an exportation, has the power and responsibility for determining and controlling the transaction. In the case of aircraft or vessel supplies under 19 U.S.C. 1309(b), exporter means the party who has the power and responsibility for lading supplies on the qualifying aircraft or vessel.

Filing. Filing means the electronic delivery to CBP of any document or documentation, as provided for in this part.

Formula. Formula refers to records that identify the quantity of each element, material, chemical, mixture, or other substance incorporated into a manufactured article (and includes those used in the manufacturing or production process). This includes records kept in the normal course of business.

Fungible merchandise or articles. Fungible merchandise or articles means merchandise or articles which for commercial purposes are identical and interchangeable in all situations.

General manufacturing drawback ruling. A general manufacturing drawback ruling means a description of a manufacturing or production operation for drawback and the regulatory requirements and interpretations applicable to that operation ( see § 190.7).

Intermediate party. Intermediate party means any party in the chain of commerce leading to the exporter (or destroyer) from the importer and who has acquired, purchased, or possessed the imported or substituted merchandise (or any intermediate or finished article, in the case of manufacturing drawback) as allowed under the applicable regulations for the type of drawback claimed, which authorize the transfer of the imported or other drawback eligible merchandise by that intermediate party to another party.

Manufacture or production. Manufacture or production means a process, including, but not limited to, an assembly, by which merchandise is either made into a new and different article having a distinctive name, character or use; or is made fit for a particular use even though it is not made into a new and different article.

Multiple products. Multiple products mean two or more products produced concurrently by a manufacture or production operation or operations.

Per unit averaging. Per unit averaging means the equal apportionment of the amount of duties, taxes, and fees eligible for drawback for all units covered by a single line item on an entry summary to each unit of merchandise. This method of refund calculation is required for certain substitution drawback claims ( see § 190.51(b)(ii)), which may also be subject to additional limitations under the “lesser of” rules, if applicable ( see § 190.22(a)(1)(ii) and 190.32(b)).

Possession. Possession, for purposes of substitution unused merchandise drawback (19 U.S.C. 1313(j)(2)), means physical or operational control of the merchandise, including ownership while in bailment, in leased facilities, in transit to, or in any other manner under the operational control of, the party claiming drawback.

Records. Records include, but are not limited to, written or electronic business records, statements, declarations, documents and electronically generated or machine readable data which pertain to a drawback claim or to the information contained in the records required by Chapter 4 of Title 19, United States Code, in connection with the filing of a drawback claim and which may include records normally kept in the ordinary course of business ( see 19 U.S.C. 1508).

Relative value. Relative value means, except for purposes of § 190.51(b), the value of a product divided by the total value of all products which are necessarily manufactured or produced concurrently in the same operation. Relative value is based on the market value, or other value approved by CBP, of each such product determined as of the time it is first separated in the manufacturing or production process. Market value is generally measured by the selling price, not including any packaging, transportation, or other identifiable costs, which accrue after the product itself is processed. Drawback must be apportioned to each such product based on its relative value at the time of separation.

Schedule. A schedule means a document filed by a drawback claimant, under section 313(a) or (b), as amended (19 U.S.C. 1313(a) or (b)), showing the quantity of imported or substituted merchandise used in or appearing in each article exported or destroyed that justifies a claim for drawback.

Schedule B. Schedule B means the Department of Commerce Schedule B, Statistical Classification of Domestic and Foreign Commodities Exported from the United States.

Sought chemical element. A sought chemical element, under section 313(b), means an element listed in the Periodic Table of Elements that is imported into the United States or a chemical compound (a distinct substance formed by a chemical union of two or more elements in definite proportion by weight) consisting of those elements, either separately in elemental form or contained in source material.

Specific manufacturing drawback ruling. A specific manufacturing drawback ruling means a letter of approval (or its electronic equivalent) issued by CBP Headquarters in response to an application filed by a manufacturer or producer for a ruling on a specific manufacturing or production operation for drawback, as described in the format in Appendix B of this part. Specific manufacturing drawback rulings are subject to the provisions in part 177 of this chapter.

Substituted merchandise or articles. Substituted merchandise or articles means merchandise or articles that may be substituted as follows:

(1) For manufacturing drawback pursuant to section 1313(b), substituted merchandise must be classifiable under the same 8-digit HTSUS subheading number as the designated imported merchandise;

(2) For rejected merchandise drawback pursuant to section 1313(c)(2), substituted merchandise must be classifiable under the same 8-digit HTSUS subheading number and have the same specific product identifier (such as part number, SKU, or product code) as the designated imported merchandise;

(3) For unused merchandise drawback pursuant to section 1313(j)(2), substituted merchandise must be classifiable under the same 8-digit HTSUS subheading number as the designated imported merchandise except for wine which may also qualify pursuant to § 190.32(d), but when the 8-digit HTSUS subheading number under which the imported merchandise is classified begins with the term “other,” then the other merchandise may be substituted for imported merchandise for drawback purposes if the other merchandise and such imported merchandise are classifiable under the same 10-digit HTSUS statistical reporting number and the article description for that 10-digit HTSUS statistical reporting number does not begin with the term “other”; but when the first 8 digits of the 10-digit Schedule B number applicable to the exported merchandise are the same as the first 8 digits of the HTSUS subheading number under which the imported merchandise is classified, the merchandise may be substituted (without regard to whether the Schedule B number corresponds to more than one 8-digit HTSUS subheading number); and

(4) For substitution drawback of finished petroleum derivatives pursuant to section 1313(p), a substituted article must be of the same kind and quality as the qualified article for which it is substituted, that is, the articles must be commercially interchangeable or described in the same 8-digit HTSUS subheading number ( see § 190.172(b)).

Unused merchandise. Unused merchandise means, for purposes of unused merchandise drawback claims, imported merchandise or other merchandise upon which either no operations have been performed or upon which any operation or combination of operations has been performed (including, but not limited to, testing, cleaning, repacking, inspecting, sorting, refurbishing, freezing, blending, repairing, reworking, cutting, slitting, adjusting, replacing components, relabeling, disassembling, and unpacking), but which does not amount to a manufacture or production for drawback purposes under 19 U.S.C. 1313(a) or (b).

Verification. Verification means the examination of any and all records, maintained by the claimant, or any party involved in the drawback process, which are required by the appropriate CBP officer to render a meaningful recommendation concerning the drawback claimant's conformity to the law and regulations and the determination of supportability, correctness, and validity of the specific claim or groups of claims being verified.

Wine. Wine, for purposes of substitution unused merchandise drawback under 19 U.S.C. 1313(j)(2) and pursuant to the alternative standard for substitution ( see 19 CFR 190.32(d)), refers to table wine. Consistent with Alcohol and Tobacco Tax and Trade Bureau (TTB) regulations, table wine is a “Class 1 grape wine” that satisfies the requirements of 27 CFR 4.21(a)(1) and having an alcoholic content not in excess of 14 percent by volume pursuant to 27 CFR 4.21(a)(2)).

§ 190.3 Duties, taxes, and fees subject or not subject to drawback.

(a) Drawback is allowable pursuant to 19 U.S.C. 1313 on duties, taxes, and fees paid on imported merchandise which were imposed under Federal law upon entry or importation, including:

(1) Ordinary customs duties, including:

(i) Duties paid on an entry, or withdrawal from warehouse, for consumption for which liquidation has become final;

(ii) Estimated duties paid on an entry, or withdrawal from warehouse, for consumption, for which liquidation has not become final, subject to the conditions and requirements of § 190.81(b); and

(iii) Tenders of duties after liquidation of the entry, or withdrawal from warehouse, for consumption for which the duties are paid, subject to the conditions and requirements of § 190.81(c), including:

(A) Voluntary tenders (for purposes of this section, a “voluntary tender” is a payment of duties on imported merchandise in excess of duties included in the liquidation of the entry, or withdrawal from warehouse, for consumption, provided that the liquidation has become final and that the other conditions of this section and § 190.81 are met);

(B) Tenders of duties in connection with notices of prior disclosure under 19 U.S.C. 1592(c)(4); and

(C) Duties restored under 19 U.S.C. 1592(d).

(2) Marking duties assessed under section 304(c), Tariff Act of 1930, as amended (19 U.S.C. 1304(c));

(3) Internal revenue taxes which attach upon importation;

(4) Merchandise processing fees ( see § 24.23 of this chapter); and

(5) Harbor maintenance taxes ( see § 24.24 of this chapter).

(b) Drawback is not allowable on antidumping and countervailing duties which were imposed on any merchandise entered, or withdrawn from warehouse, for consumption ( see 19 U.S.C. 1677h).

(c) Drawback is not allowed when the identified merchandise, the designated imported merchandise, or the substituted merchandise (when applicable), consists of an agricultural product which is duty-paid at the over-quota rate of duty established under a tariff-rate quota, except that:

(1) Agricultural products as described in this paragraph are eligible for drawback under 19 U.S.C. 1313(j)(1); and

(2) Tobacco otherwise meeting the description of agricultural products in this paragraph is eligible for drawback under 19 U.S.C. 1313(j)(1) or 19 U.S.C. 1313(a).

§ 190.4 Merchandise in which a U.S. Government interest exists.

(a) Restricted meaning of Government. A U.S. Government instrumentality operating with nonappropriated funds is considered a Government entity within the meaning of this section.

(b) Allowance of drawback. If the merchandise is sold to the U.S. Government, drawback will be available only to the:

(1) Department, branch, agency, or instrumentality of the U.S. Government which purchased it; or

(2) Supplier, or any of the parties specified in § 190.82, provided the claim is supported by documentation signed by a proper officer of the department, branch, agency, or instrumentality concerned certifying that the right to drawback was reserved by the supplier or other parties with the knowledge and consent of the department, branch, agency, or instrumentality.

(c) Bond. No bond will be required when a U.S. Government entity claims drawback.

§ 190.5 Guantanamo Bay, insular possessions, trust territories.

Guantanamo Bay Naval Station is considered foreign territory for drawback purposes and, accordingly, drawback may be permitted on articles shipped there from the customs territory of the United States. Drawback is not allowed, except on claims made under 19 U.S.C. 1313(j)(1), on articles shipped from the customs territory of the United States to the U.S. Virgin Islands, American Samoa, Wake Island, Midway Islands, Kingman Reef, Guam, Canton Island, Enderbury Island, Johnston Island, or Palmyra Island. See 19 U.S.C. 1313(y). Puerto Rico, which is part of the customs territory of the United States, is not considered foreign territory for drawback purposes and, accordingly, drawback may not be permitted on articles shipped there from elsewhere in the customs territory of the United States.

§ 190.6 Authority to sign or electronically certify drawback documents.

(a) Documents listed in paragraph (b) of this section must be signed or electronically certified only by one of the following:

(1) The president, a vice president, secretary, treasurer, or any other employee legally authorized to bind the corporation;

(2) A full partner of a partnership;

(3) The owner of a sole proprietorship;

(4) Any employee of the business entity with a power of attorney;

(5) An individual acting on his or her own behalf; or

(6) A licensed customs broker with a power of attorney to sign the applicable drawback document.

(b) The following documents require execution in accordance with paragraph (a) of this section:

(1) Drawback entries;

(2) Notices of Intent to Export, Destroy, or Return Merchandise for Purposes of Drawback;

(3) Certifications to assign the right to claim drawback ( see §§ 190.28 and 190.82); and

(4) Abstracts, schedules and extracts from monthly abstracts, and bills of materials and formulas, if not included as part of a drawback claim.

(c) The following documents ( see also part 177 of this chapter) may be executed by one of the persons described in paragraph (a) of this section or by any other individual legally authorized to bind the person (or entity) for whom the document is executed:

(1) A letter of notification of intent to operate under a general manufacturing drawback ruling under § 190.7;

(2) An application for a specific manufacturing drawback ruling under § 190.8;

(3) An application for waiver of prior notice under § 190.91 or a 1-time waiver of prior notice under § 190.36;

(4) An application for approval of accelerated payment of drawback under § 190.92; and

(5) An application for certification in the Drawback Compliance Program under § 190.193.

§ 190.7 General manufacturing drawback ruling.

(a) Purpose; eligibility. General manufacturing drawback rulings are designed to simplify drawback for certain common manufacturing operations but do not preclude or limit the use of applications for specific manufacturing drawback rulings ( see § 190.8). A manufacturer or producer engaged in an operation that falls within a published general manufacturing drawback ruling may submit a letter of notification of intent to operate under that general ruling. Where a separately-incorporated subsidiary of a parent corporation is engaged in manufacture or production for drawback, the subsidiary is the proper party to submit the letter of notification, and cannot operate under a letter of notification submitted by the parent corporation.

(b) Procedures —(1) Publication. General manufacturing drawback rulings are contained in Appendix A to this part. As deemed necessary by CBP, new general manufacturing drawback rulings will be issued as CBP Decisions and added to the appendix thereafter.

(2) Submission. Letters of notification of intent to operate under a general manufacturing drawback ruling must be submitted to any drawback office where drawback entries will be filed, concurrent with or prior to filing a claim, provided that the general manufacturing drawback ruling will be followed without variation. If there is any variation from the general manufacturing drawback ruling, the manufacturer or producer must apply for a specific manufacturing drawback ruling under § 190.8.

(3) Information required. Each manufacturer or producer submitting a letter of notification of intent to operate under a general manufacturing drawback ruling under this section must provide the following specific detailed information:

(i) Name and address of manufacturer or producer (if the manufacturer or producer is a separately-incorporated subsidiary of a corporation, the subsidiary corporation must submit a letter of notification in its own name);

(ii) In the case of a business entity, the names of the persons listed in § 190.6(a)(1) through (6) who will sign drawback documents;

(iii) Locations of the factories which will operate under the letter of notification;

(iv) Identity (by T.D. or CBP Decision number and title) of the general manufacturing drawback ruling under which the manufacturer or producer will operate;

(v) Description of the merchandise and articles, unless specifically described in the general manufacturing drawback ruling, and the applicable 8-digit HTSUS subheading number(s) for imported merchandise that will be designated as part of substitution manufacturing drawback claims;

(vi) Description of the manufacturing or production process, unless specifically described in the general manufacturing drawback ruling;

(vii) Basis of claim used for calculating drawback; and

(viii) IRS (Internal Revenue Service) number (with suffix) of the manufacturer or producer.

(c) Review and action by CBP. The drawback office to which the letter of notification of intent to operate under a general manufacturing drawback ruling was submitted will review the letter of notification of intent.

(1) Acknowledgment. The drawback office will promptly issue a letter acknowledging receipt of the letter of intent and authorizing the person to operate under the identified general manufacturing drawback ruling, subject to the requirements and conditions of that general manufacturing drawback ruling and the law and regulations, to the person who submitted the letter of notification if:

(i) The letter of notification is complete ( i.e., contains the information required in paragraph (b)(3) of this section);

(ii) The general manufacturing drawback ruling identified by the manufacturer or producer is applicable to the manufacturing or production process;

(iii) The general manufacturing drawback ruling identified by the manufacturer or producer will be followed without variation; and

(iv) The described manufacturing or production process is a manufacture or production as defined in § 190.2.

(2) Computer-generated number. With the letter of acknowledgment the drawback office will include the unique computer-generated number assigned to the acknowledgment of the letter of notification of intent to operate. This number must be stated when the person files manufacturing drawback claims with CBP under the general manufacturing drawback ruling.

(3) Non-conforming letters of notification of intent. If the letter of notification of intent to operate does not meet the requirements of paragraph (c)(1) of this section in any respect, the drawback office will promptly and in writing specifically advise the person of this fact and why this is so. A letter of notification of intent to operate which is not acknowledged may be resubmitted to the drawback office to which it was initially submitted with modifications and/or explanations addressing the reasons CBP may have given for non-acknowledgment, or the matter may be referred (by letter from the manufacturer or producer) to CBP Headquarters (Attention: Entry Process and Duty Refunds Branch, Regulations and Rulings, Office of Trade).

(d) Procedure to modify a general manufacturing drawback ruling. Modifications are allowed under the same procedure terms as provided for in § 190.8(g) for specific manufacturing drawback rulings.

(e) Duration. Acknowledged letters of notification under this section will remain in effect under the same terms as provided for in § 190.8(h) for specific manufacturing drawback rulings.

§ 190.8 Specific manufacturing drawback ruling.

(a) Applicant. Unless operating under a general manufacturing drawback ruling ( see § 190.7), each manufacturer or producer of articles intended to be claimed for drawback must apply for a specific manufacturing drawback ruling. Where a separately-incorporated subsidiary of a parent corporation is engaged in manufacture or production for drawback, the subsidiary is the proper party to apply for a specific manufacturing drawback ruling, and cannot operate under any specific manufacturing drawback ruling approved in favor of the parent corporation.

(b) Sample application. Sample formats for applications for specific manufacturing drawback rulings are contained in Appendix B to this part.

(c) Content of application. The application of each manufacturer or producer must include the following information as applicable:

(1) Name and address of the applicant;

(2) Internal Revenue Service (IRS) number (with suffix) of the applicant;

(3) Description of the type of business in which engaged;

(4) Description of the manufacturing or production process, which shows how the designated and substituted merchandise is used to make the article that is to be exported or destroyed;

(5) In the case of a business entity, the names of persons listed in § 190.6(a)(1) through (6) who will sign drawback documents;

(6) Description of the imported merchandise including specifications and applicable 8-digit HTSUS subheading(s);

(7) Description of the exported article and applicable 8-digit HTSUS subheadings;

(8) How manufacturing drawback is calculated;

(9) Summary of the records kept to support claims for drawback; and

(10) Identity and address of the recordkeeper if other than the claimant.

(d) Submission of application. An application for a specific manufacturing drawback ruling must be submitted to CBP Headquarters (Attention: Entry Process and Duty Refunds Branch, Regulations and Rulings, Office of Trade). Applications may be physically delivered (in triplicate) or submitted via email. Claimants must indicate if drawback claims are to be filed under the ruling at more than one drawback office.

(e) Review and action by CBP. CBP Headquarters will review each application for a specific manufacturing drawback ruling.

(1) Approval. If the application is consistent with the drawback law and regulations, CBP Headquarters will issue a letter of approval to the applicant and will upload a copy of the application for the specific manufacturing drawback ruling to the Automated Commercial Environment (ACE) along with a copy of the letter of approval. Each specific manufacturing drawback ruling will be assigned a unique manufacturing number which will be included in the letter of approval to the applicant from CBP Headquarters, which must be used when filing manufacturing drawback claims.

(2) Disapproval. If the application is not consistent with the drawback law and regulations, CBP Headquarters will promptly and in writing inform the applicant that the application cannot be approved and will specifically advise the applicant why this is so. A disapproved application may be resubmitted with modifications and/or explanations addressing the reasons given for disapproval; a disapproval may be appealed to CBP Headquarters (Attention: Entry Process and Duty Refunds Branch, Regulations and Rulings, Office of Trade).

(f) Schedules and supplemental schedules. When an application for a specific manufacturing drawback ruling states that drawback is to be based upon a schedule, as defined in § 190.2, filed by the manufacturer or producer, the schedule will be reviewed by CBP Headquarters. The application may include a request for authorization for the filing of supplemental schedules with the drawback office where claims are filed.

(g) Procedure to modify a specific manufacturing drawback ruling —(1) Supplemental application. Except as provided for limited modifications in paragraph (g)(2) of this section, a manufacturer or producer desiring to modify an existing specific manufacturing drawback ruling may submit a supplemental application for such modification to CBP Headquarters (Attention: Entry Process and Duty Refunds Branch, Regulations and Rulings, Office of Trade). Such a supplemental application may, at the discretion of the manufacturer or producer, be in the form of the original application, or it may identify the specific manufacturing drawback ruling to be modified (by T.D. or CBP Decision number, if applicable, and unique computer-generated number) and include only those paragraphs of the application that are to be modified, with a statement that all other paragraphs are unchanged and are incorporated by reference in the supplemental application.

(2) Limited modifications. (i) A supplemental application for a specific manufacturing drawback ruling must be submitted to the drawback office where the original claim(s) was filed if the modifications are limited to:

(A) The location of a factory, or the addition of one or more factories where the methods followed and records maintained are the same as those at another factory operating under the existing specific manufacturing drawback ruling of the manufacturer or producer;

(B) The succession of a sole proprietorship, partnership or corporation to the operations of a manufacturer or producer;

(C) A change in name of the manufacturer or producer;

(D) A change in the persons who will sign drawback documents in the case of a business entity;

(E) A change in the basis of claim used for calculating drawback;

(F) A change in the decision to use or not to use an agent under § 190.9, or a change in the identity of an agent under that section;

(G) A change in the drawback office where claims will be filed under the ruling ( see paragraph (g)(2)(iii) of this section);

(H) An authorization to continue operating under a ruling approved under 19 CFR part 191 ( see paragraph (g)(2)(iv) of this section); or

(I) Any combination of the foregoing changes.

(ii) A limited modification, as provided for in this paragraph (g)(2), must contain only the modifications to be made, in addition to identifying the specific manufacturing drawback ruling and being signed by an authorized person. To effect a limited modification, the manufacturer or producer must file with the drawback office(s) where claims were originally filed a letter stating the modifications to be made. The drawback office will promptly acknowledge acceptance of the limited modifications.

(iii) To transfer a claim to another drawback office, the manufacturer or producer must file with the second drawback office where claims will be filed, a written application to file claims at that office, with a copy of the application and approval letter under which claims are currently filed. The manufacturer or producer must provide a copy of the written application to file claims at the new drawback office to the drawback office where claims are currently filed.

(iv) To file a claim under this part based on a ruling approved under 19 CFR part 191, the manufacturer or producer must file a supplemental application for a limited modification no later than February 23, 2019, which provides the following:

(A) Revised parallel columns with the required annotations for the applicable 8-digit HTSUS subheading number(s);

(B) Revised bill of materials or formula with the required annotations for the applicable 8-digit HTSUS subheading number(s); and

(C) A certification of continued compliance, which states: “The undersigned acknowledges the current statutory requirements under 19 U.S.C. 1313 and the regulatory requirements in 19 CFR part 190, and hereby certifies its continuing eligibility for operating under the manufacturing drawback ruling in compliance therewith.”

(h) Duration. Subject to 19 U.S.C. 1625 and part 177 of this chapter, a specific manufacturing drawback ruling under this section will remain in effect indefinitely unless:

(1) No drawback claim is filed under the ruling for a period of 5 years and notice of termination is published in the Customs Bulletin; or

(2) The manufacturer or producer to whom approval of the ruling was issued files a request to terminate the ruling, in writing, with CBP Headquarters (Attention: Entry Process and Duty Refunds Branch, Regulations and Rulings, Office of Trade).

§ 190.9 Agency.

(a) General. An owner of the identified merchandise, the designated imported merchandise and/or the substituted merchandise that is used to produce the exported articles may employ another person to do part, or all, of the manufacture or production under 19 U.S.C. 1313(a) or (b) and as defined in § 190.2. For purposes of this section, such owner is the principal and such other person is the agent. Under 19 U.S.C. 1313(b), the principal will be treated as the manufacturer or producer of merchandise used in manufacture or production by the agent. The principal must be able to establish by its manufacturing records, the manufacturing records of its agent(s), or the manufacturing records of both (or all) parties, compliance with all requirements of this part ( see, in particular, § 190.26).

(b) Requirements —(1) Contract. The manufacturer must establish that it is the principal in a contract between it and its agent who actually does the work on either the designated or substituted merchandise, or both, for the principal. The contract must include:

(i) Terms of compensation to show that the relationship is an agency rather than a sale;

(ii) How transfers of merchandise and articles will be recorded by the principal and its agent;

(iii) The work to be performed on the merchandise by the agent for the principal;

(iv) The degree of control that is to be exercised by the principal over the agent's performance of work;

(v) The party who is to bear the risk of loss on the merchandise while it is in the agent's custody; and

(vi) The period that the contract is in effect.

(2) Ownership of the merchandise by the principal. The records of the principal and/or the agent must establish that the principal had legal and equitable title to the merchandise before receipt by the agent. The right of the agent to assert a lien on the merchandise for work performed does not derogate the principal's ownership interest under this section.

(3) Sales prohibited. The relationship between the principal and agent must not be that of a seller and buyer. If the parties' records show that, with respect to the merchandise that is the subject of the principal-agent contract, the merchandise is sold to the agent by the principal, or the articles manufactured by the agent are sold to the principal by the agent, those records are inadequate to establish existence of a principal-agency relationship under this section.

(c) Specific manufacturing drawback rulings; general manufacturing drawback rulings —(1) Owner. An owner who intends to operate under the principal-agent procedures of this section must state that intent in any letter of notification of intent to operate under a general manufacturing drawback ruling filed under § 190.7 or in any application for a specific manufacturing drawback ruling filed under § 190.8.

(2) Agent. Each agent operating under this section must have filed a letter of notification of intent to operate under a general manufacturing drawback ruling ( see § 190.7), for an agent, covering the articles manufactured or produced, or have obtained a specific manufacturing drawback ruling ( see § 190.8), as appropriate.

(d) Certificate —(1) Contents of certificate. The principal for whom processing is conducted under this section must file, with any drawback claim, a certificate, subject to the recordkeeping requirements of §§ 190.15 and 190.26, certifying that upon request by CBP it can establish the following:

(i) Quantity of merchandise transferred from the principal to the agent;

(ii) Date of transfer of the merchandise from the principal to the agent;

(iii) Date of manufacturing or production operations performed by the agent;

(iv) Total quantity, description, and 10-digit HTSUS classification of merchandise appearing in or used in manufacturing or production operations performed by the agent;

(v) Total quantity, description, and 10-digit HTSUS classification of articles produced in manufacturing or production operations performed by the agent;

(vi) Quantity and 10-digit HTSUS classification of articles transferred from the agent to the principal; and

(vii) Date of transfer of the articles from the agent to the principal.

(2) Blanket certificate. The certificate required under paragraph (d)(1) of this section may be a blanket certificate for a stated period.

§ 190.10 Transfer of merchandise.

(a) Ability to transfer merchandise. (1) A party may transfer drawback eligible merchandise or articles to another party, provided that the transferring party:

(i) Imports and pays duties, taxes, and/or fees on such imported merchandise;

(ii) Receives such imported merchandise;

(iii) In the case of 19 U.S.C. 1313(j)(2), receives such imported merchandise, substituted merchandise, or any combination of such imported and substituted merchandise; or

(iv) Receives an article manufactured or produced under 19 U.S.C. 1313(a) and/or (b).

(2) The transferring party must maintain records that:

(i) Document the transfer of that merchandise or article;

(ii) Identify such merchandise or article as being that to which a potential right to drawback exists; and

(iii) Assign such right to the transferee ( see § 190.82).

(b) Required records. The records that support the transfer must include the following information:

(1) The party to whom the merchandise or articles are delivered;

(2) Date of physical delivery;

(3) Import entry number and entry line item number;

(4) Quantity delivered and, for substitution claims, total quantity attributable to the relevant import entry line item number;

(5) Total duties, taxes, and fees paid on, or attributable to, the delivered merchandise, and, for substitution claims, total duties, taxes, and fees paid on, or attributable to, the relevant import entry line item number;

(6) Date of importation;

(7) Port where import entry filed;

(8) Person from whom received;

(9) Description of the merchandise delivered;

(10) The 10-digit HTSUS classification for the designated imported merchandise (such HTSUS number must be from the entry summary line item and other entry documentation for the merchandise); and

(11) If the merchandise transferred is substituted for the designated imported merchandise under 19 U.S.C. 1313(j)(2), the 10-digit HTSUS classification of the substituted merchandise (as if it had been imported).

(c) Line item designation for partial transfers of merchandise. Regardless of any agreement between the transferor and the transferee, the method used for the first filed claim relating to merchandise reported on that entry summary line item will be the exclusive basis for the calculation of refunds (either using per unit averaging or not) for any subsequent claims for any other merchandise reported on that same entry summary line item. See § 190.51(a)(3).

(d) Retention period. The records listed in paragraph (b) of this section must be retained by the issuing party for 3 years from the date of liquidation of the related claim or longer period if required by law ( see 19 U.S.C. 1508(c)(3)).

(e) Submission to CBP. If the records required under paragraph (b) of this section or additional records requested by CBP are not provided by the claimant upon request by CBP, the part of the drawback claim dependent on those records will be denied.

(f) Warehouse transfer and withdrawals. The person in whose name merchandise is withdrawn from a bonded warehouse will be considered the importer for drawback purposes. No records are required to document prior transfers of merchandise while in a bonded warehouse.

§ 190.11 Valuation of merchandise.

The values declared to CBP as part of a complete drawback claim pursuant to § 190.51 must be established as provided below. If the drawback eligible merchandise or articles are destroyed, then the value of the imported merchandise and any substituted merchandise must be reduced by the value of materials recovered during destruction in accordance with 19 U.S.C. 1313(x).

(a) Designated imported merchandise. The value of the imported merchandise is determined as follows:

(1) Direct identification claims. The value of the imported merchandise is the customs value of the imported merchandise upon entry into the United States (see subpart E of part 152 of this chapter); or, if the merchandise is identified pursuant to an approved accounting method, then the value of the imported merchandise is the customs value that is properly attributable to the imported merchandise as identified by the appropriate recordkeeping (see § 190.14, varies by accounting method).

(2) Substitution claims. The value of the designated imported merchandise is the per unit average value, which is the entered value for the applicable entry summary line item apportioned equally over each unit covered by the line item.

(b) Exported merchandise or articles. The value of the exported merchandise or articles eligible for drawback is the selling price as declared for the Electronic Export Information (EEI), including any adjustments and exclusions required by 15 CFR 30.6(a). If there is no selling price for the EEI, then the value is the other value as declared for the EEI including any adjustments and exclusions required by 15 CFR 30.6(a) (e.g., the market price, if the goods are shipped on consignment). (For special types of transactions where certain unusual conditions are involved, the value for the EEI is determined pursuant to 15 CFR part 30 subpart C.) If no EEI is required ( see, 15 CFR part 30 subpart D for a complete list of exemptions), then the claimant must provide the value that would have been set forth on the EEI when the exportation took place, but for the exemption from the requirement for an EEI.

(c) Destroyed merchandise or articles. The value of the destroyed merchandise or articles eligible for drawback is the value at the time of destruction, determined as if the merchandise had been exported in its condition at the time of its destruction and an EEI had been required.

(d) Substituted merchandise for manufacturing drawback claims. The value of the substituted merchandise for manufacturing drawback claims pursuant to 19 U.S.C. 1313(b) is the cost of acquisition or production for the manufacturer or producer who used the substituted merchandise in manufacturing or production. These costs must be based on records kept in the ordinary course of business and may be determined on the basis of any of the inventory accounting methods recognized in the Generally Accepted Accounting Principles. Any inventory management method which is used by a manufacturer or producer for valuation of the substituted merchandise for manufacturing drawback claims under 19 U.S.C. 1313(b) must be used without variation with other methods for a period of at least 1 year.

§ 190.12 Claim filed under incorrect provision.

A drawback claim filed under this part and pursuant to any provision of section 313 of the Act, as amended (19 U.S.C. 1313), may be deemed filed pursuant to any other provision thereof should the drawback office determine that drawback is not allowable under the provision as originally filed, but that it is allowable under such other provision. To be allowable under such other provision, the claim must meet each of the requirements of such provision. The claimant may raise alternative provisions prior to liquidation and by protest ( see part 174 of this chapter).

§ 190.13 Packaging materials.

(a) Imported packaging material. Drawback is provided for in section 313(q)(1) of the Act, as amended (19 U.S.C. 1313(q)(1)), on imported packaging material used to package or repackage merchandise or articles exported or destroyed pursuant to section 313(a), (b), (c), or (j) of the Act, as amended (19 U.S.C. 1313(a), (b), (c), or (j)). The amount of drawback payable on the packaging material is determined pursuant to the particular drawback provision to which the packaged goods themselves are subject. The packaging material must be separately identified on the claim, and all other information and documents required for the particular drawback provision under which the claim is made must be provided for the packaging material.

(b) Packaging material manufactured in United States from imported materials. Drawback is provided for in section 313(q)(2) of the Act, as amended (19 U.S.C. 1313(q)(2)), on packaging material that is manufactured or produced in the United States from imported materials and used to package or repackage articles that are exported or destroyed under section 313(a) or (b) of the Act, as amended (19 U.S.C. 1313(a) or (b)). The packaging material and the imported merchandise used in the manufacture or production of the packaging material must be separately identified on the claim, and all other information and documents required for the particular drawback provision under which the claim is made must be provided for the packaging material as well as the imported merchandise used in its manufacture or production, for purposes of determining the applicable drawback payable. Drawback under 19 U.S.C. 1313(q)(2) is allowed, regardless of whether or not any of the articles or merchandise the packaging contains are actually eligible for drawback.

§ 190.14 Identification of merchandise or articles by accounting method.

(a) General. This section provides for the identification of merchandise or articles for drawback purposes by the use of accounting methods. This section applies to identification of merchandise or articles in inventory or storage, as well as identification of merchandise used in manufacture or production, as defined in § 190.2. This section is not applicable to situations in which the drawback law authorizes substitution (substitution is allowed in specified situations under 19 U.S.C. 1313(b), 1313(j)(2), 1313(k), and 1313(p); this section does apply to situations in these subsections in which substitution is not allowed, as well as to the subsections of the drawback law under which no substitution is allowed). When substitution is authorized, merchandise or articles may be substituted without reference to this section, under the criteria and conditions specifically authorized in the statutory and regulatory provisions providing for the substitution.

(b) Conditions and criteria for identification by accounting method. Manufacturers, producers, claimants, or other appropriate persons may identify for drawback purposes lots of merchandise or articles under this section, subject to each of the following conditions and criteria:

(1) The lots of merchandise or articles to be so identified must be fungible as defined in § 190.2;

(2) The person using the identification method must be able to establish that inventory records (for example, material control records), prepared and used in the ordinary course of business, account for the lots of merchandise or articles to be identified as being received into and withdrawn from the same inventory. Even if merchandise or articles are received or withdrawn at different geographical locations, if such inventory records treat receipts or withdrawals as being from the same inventory, those inventory records may be used to identify the merchandise or articles under this section, subject to the conditions of this section. If any such inventory records (that is, inventory records prepared and used in the ordinary course of business) treat receipts and withdrawals as being from different inventories, those inventory records must be used and receipts into or withdrawals from the different inventories may not be accounted for together. If units of merchandise or articles can be specifically identified (for example, by serial number), the merchandise or articles must be specifically identified and may not be identified by accounting method, unless it is established that inventory records, prepared and used in the ordinary course of business, treat the merchandise or articles to be identified as being received into and withdrawn from the same inventory (subject to the above conditions);

(3) Unless otherwise provided in this section or specifically approved by CBP (by a binding ruling under part 177 of this chapter), all receipts (or inputs) into and all withdrawals from the inventory must be recorded in the accounting record;

(4) The records which support any identification method under this section are subject to verification by CBP ( see § 190.61). If CBP requests such verification, the person using the identification method must be able to demonstrate how, under generally accepted accounting procedures, the records which support the identification method used account for all merchandise or articles in, and all receipts into and withdrawals from, the inventory, and the drawback per unit for each receipt and withdrawal; and

(5) Any accounting method which is used by a person for drawback purposes under this section must be used exclusively, without using other methods for a period of at least 1 year, unless approval is given by CBP for a shorter period.

(c) Approved accounting methods. The following accounting methods are approved for use in the identification of merchandise or articles for drawback purposes under this section. If a claim is eligible for the use of any accounting method, the claimant must indicate on the drawback entry whether an accounting method was used, and if so, which accounting method was used, to identify the merchandise as part of the complete claim (see § 190.51).

(1) First-in, first-out ( FIFO )—(i) General. The FIFO method is the method by which fungible merchandise or articles are identified by recordkeeping on the basis of the first merchandise or articles received into the inventory. Under this method, withdrawals are from the oldest (first-in) merchandise or articles in the inventory at the time of withdrawal.

(ii) Example. If the beginning inventory is zero, 100 units with $1 drawback attributable per unit are received in inventory on the 2nd of the month, 50 units with no drawback attributable per unit are received into inventory on the 5th of the month, 75 units are withdrawn for domestic (non-export) shipment on the 10th of the month, 75 units with $2 drawback attributable per unit are received in inventory on the 15th of the month, 100 units are withdrawn for export on the 20th of the month, and no other receipts or withdrawals occurred in the month, the drawback attributable to the 100 units withdrawn for export on the 20th is a total of $75 (25 units from the receipt on the 2nd with $1 drawback attributable per unit, 50 units from the receipt on the 5th with no drawback attributable per unit, and 25 units from the receipt on the 15th with $2 drawback attributable per unit). The basis of the foregoing and the effects on the inventory of the receipts and withdrawals, and balance in the inventory thereafter are as follows: On the 2nd of the month the receipt of 100 units ($1 drawback/unit) results in a balance of that amount; the receipt of 50 units ($0 drawback/unit) on the 5th results in a balance of 150 units (100 with $1 drawback/unit and 50 with $0 drawback/unit); the withdrawal on the 10th of 75 units ($1 drawback/unit) results in a balance of 75 units (25 with $1 drawback/unit and 50 with $0 drawback/unit); the receipt of 75 units ($2 drawback/unit) on the 15th results in a balance of 150 units (25 with $1 drawback/unit, 50 with $0 drawback/unit, and 75 with $2 drawback/unit); the withdrawal on the 20th of 100 units (25 with $1 drawback/unit, 50 with $0 drawback/unit, and 25 with $2 drawback unit) results in a balance of 50 units (all 50 with $2 drawback/unit).

(2) Last-in, first out ( LIFO )—(i) General. The LIFO method is the method by which fungible merchandise or articles are identified by recordkeeping on the basis of the last merchandise or articles received into the inventory. Under this method, withdrawals are from the newest (last-in) merchandise or articles in the inventory at the time of withdrawal.

(ii) Example. In the example in paragraph (c)(1)(ii) of this section, the drawback attributable to the 100 units withdrawn for export on the 20th is a total of $175 (75 units from the receipt on the 15th with $2 drawback attributable per unit and 25 units from the receipt on the 2nd with $1 drawback attributable per unit). The basis of the foregoing and the effects on the inventory of the receipts and withdrawals, and balance in the inventory thereafter are as follows: On the 2nd of the month the receipt of 100 units ($1 drawback/unit) results in a balance of that amount; the receipt of 50 units ($0 drawback/unit) on the 5th results in a balance of 150 units (100 with $1 drawback/unit and 50 with $0 drawback/unit); the withdrawal on the 10th of 75 units (50 with $0 drawback/unit and 25 with $1 drawback/unit) results in a balance of 75 units (all with $1 drawback/unit); the receipt of 75 units ($2 drawback/unit) on the 15th results in a balance of 150 units (75 with $1 drawback/unit and 75 with $2 drawback/unit); the withdrawal on the 20th of 100 units (75 with $2 drawback/unit and 25 with $1 drawback/unit) results in a balance of 50 units (all 50 with $1 drawback/unit).

(3) Low-to-high —(i) General. The low-to-high method is the method by which fungible merchandise or articles are identified by recordkeeping on the basis of the lowest drawback amount per unit of the merchandise or articles in inventory. Merchandise or articles with no drawback attributable to them (for example, domestic merchandise or duty-free merchandise) must be accounted for and are treated as having the lowest drawback attributable to them. Under this method, withdrawals are from the merchandise or articles with the least amount of drawback attributable to them, then those with the next higher amount, and so forth. If the same amount of drawback is attributable to more than one lot of merchandise or articles, withdrawals are from the oldest (first-in) merchandise or articles among those lots with the same amount of drawback attributable. Drawback requirements are applicable to withdrawn merchandise or articles as identified (for example, if the merchandise or articles identified were attributable to an import more than 5 years before the claimed export, no drawback could be granted).

(ii) Ordinary low-to-high —(A) Method. Under the ordinary low-to-high method, all receipts into and all withdrawals from the inventory are recorded in the accounting record and accounted for so that each withdrawal, whether for export or domestic shipment, is identified by recordkeeping on the basis of the lowest drawback amount per unit of the merchandise or articles available in the inventory.

(B) Example. In this example, the beginning inventory is zero, and receipts into and withdrawals from the inventory are as follows:

Date

Receipt ($ per unit)

Withdrawals

Jan. 2

100 (zero)

Jan. 5

50 ($1.00)

Jan. 15

50 (export).

Jan. 20

50 ($1.01)

Jan. 25

50 ($1.02)

Jan. 28

50 (domestic).

Jan. 31

50 ($1.03)

Feb. 5

100 (export).

Feb. 10

50 ($.95)

Feb. 15

50 (export).

Feb. 20

50 (zero)

Feb. 23

50 (domestic).

Feb. 25

50 ($1.05)

Feb. 28

100 (export).

Mar. 5

50 ($1.06)

Mar. 10

50 ($.85)

Mar. 15

50 (export).

Mar. 21

50 (domestic).

Mar. 20

50 ($1.08)

Mar. 25

50 ($.90)

Mar. 31

100 (export).

Note to paragraph ( c )(3)( ii )(B):

The drawback attributable to the January 15 withdrawal for export is zero (the available receipt with the lowest drawback amount per unit is the January 2 receipt), the drawback attributable to the January 28 withdrawal for domestic shipment (no drawback) is zero (the remainder of the January 2 receipt), the drawback attributable to the February 5 withdrawal for export is $100.50 (the January 5 and January 20 receipts), the drawback attributable to the February 15 withdrawal for export is $47.50 (the February 10 receipt), the drawback attributable to the February 23 withdrawal for domestic shipment (no drawback) is zero (the February 20 receipt), the drawback attributable to the February 28 withdrawal for export is $102.50 (the January 25 and January 31 receipts), the drawback attributable to the March 15 withdrawal for export is $42.50 (the March 10 receipt), the drawback attributable to the March 21 withdrawal for domestic shipment (no drawback) is $52.50 (the February 25 receipt), and the drawback attributable to the March 31 withdrawal for export is $98.00 (the March 25 and March 5 receipts). Remaining in inventory is the March 20 receipt of 50 units ($1.08 drawback/unit). Total drawback attributable to withdrawals for export in this example would be $391.00.

(iii) Low-to-high method with established average inventory turn-over period —(A) Method. Under the low-to-high method with established average inventory turn-over period, all receipts into and all withdrawals for export are recorded in the accounting record and accounted for so that each withdrawal is identified by recordkeeping on the basis of the lowest drawback amount per available unit of the merchandise or articles received into the inventory in the established average inventory turn-over period preceding the withdrawal.

(B) Accounting for withdrawals ( for domestic shipments and for export ). Under the low-to-high method with established average inventory turn-over period, domestic withdrawals (withdrawals for domestic shipment) are not accounted for and do not affect the available units of merchandise or articles. All withdrawals for export must be accounted for whether or not drawback is available or claimed on the withdrawals. Once a withdrawal for export is made and accounted for under this method, the merchandise or articles withdrawn are no longer available for identification.

(C) Establishment of inventory turn-over period. For purposes of the low-to-high method with established average inventory turn-over period, the average inventory turn-over period is based on the rate of withdrawal from inventory and represents the time in which all of the merchandise or articles in the inventory at a given time must have been withdrawn based on that rate. To establish an average of this time, at least 1 year, or 3 turn-over periods (if inventory turns over fewer than 3 times per year), must be averaged. The inventory turn-over period must be that for the merchandise or articles to be identified, except that if the person using the method has more than one kind of merchandise or articles with different inventory turn-over periods, the longest average turn-over period established under this section may be used (instead of using a different inventory turn-over period for each kind of merchandise or article).

(D) Example. In the example in paragraph (c)(3)(ii)(B) of this section (but, as required for this method, without accounting for domestic withdrawals, and with an established average inventory turn-over period of 30 days), the drawback attributable to the January 15 withdrawal for export is zero (the available receipt in the preceding 30 days with the lowest amount of drawback is the January 2 receipt, of which 50 units will remain after the withdrawal), the drawback attributable to the February 5 withdrawal for export is $101.50 (the January 20 and January 25 receipts), the drawback attributable to the February 15 withdrawal for export is $47.50 (the February 10 receipt), the drawback attributable to the February 28 withdrawal for export is $51.50 (the February 20 and January 31 receipts), the drawback attributable to the March 15 withdrawal for export is $42.50 (the March 10 receipt), and the drawback attributable to the March 31 withdrawal for export is $98.00 (the March 25 and March 5 receipts). No drawback may be claimed on the basis of the January 5 receipt or the February 25 receipt because in the case of each, there were insufficient withdrawals for export within the established average inventory turn-over period; the 50 units remaining from the January 2 receipt after the January 15 withdrawal are not identified for a withdrawal for export because there is no other withdrawal for export (other than the January 15 withdrawal) within the established average inventory turn-over period; the March 20 receipt (50 units at $1.08) is not yet attributed to withdrawals for export. Total drawback attributable to withdrawals for export in this example would be $341.00.

(iv) Low-to-high blanket method —(A) Method. Under the low-to-high blanket method, all receipts into and all withdrawals for export are recorded in the accounting record and accounted for. Each withdrawal is identified on the basis of the lowest drawback amount per available unit of the merchandise or articles received into inventory in the applicable statutory period for export preceding the withdrawal (e.g., 180 days under 19 U.S.C. 1313(p) and 5 years for other types of drawback claims pursuant to 19 U.S.C. 1313(r)). Drawback requirements are applicable to withdrawn merchandise or articles as identified (for example, no drawback could be granted generally if the merchandise or articles identified were attributable to an import made more than 5 years before the claimed export; and, for claims pursuant to 19 U.S.C. 1313(p), no drawback could be granted if the merchandise or articles identified were attributable to an import that was entered more than 180 days after the date of the claimed export or if the claimed export was more than 180 days after the close of the manufacturing period attributable to an import).

(B) Accounting for withdrawals ( for domestic shipments and for export ). Under the low-to-high blanket method, domestic withdrawals (withdrawals for domestic shipment) are not accounted for and do not affect the available units of merchandise or articles. All withdrawals for export must be accounted for whether or not drawback is available or claimed on the withdrawals. Once a withdrawal for export is made and accounted for under this method, the merchandise or articles withdrawn are no longer available for identification.

(C) Example. In the example in paragraph (c)(3)(ii)(B) of this section (but, as required for this method, without accounting for domestic withdrawals), the drawback attributable to the January 15 withdrawal for export is zero (the available receipt in the inventory with the lowest amount of drawback is the January 2 receipt, of which 50 units will remain after the withdrawal), the drawback attributable to the February 5 withdrawal for export is $50.00 (the remainder of the January 2 receipt and the January 5 receipt), the drawback attributable to the February 15 withdrawal for export is $47.50 (the February 10 receipt), the drawback attributable to the February 28 withdrawal for export is $50.50 (the February 20 and January 20 receipts), the drawback attributable to the March 15 withdrawal for export is $42.50 (the March 10 receipt), and the drawback attributable to the March 31 withdrawal for export is $96.00 (the March 25 and January 25 receipts). Receipts not attributed to withdrawals for export are the January 31 (50 units at $1.03), February 25 (50 units at $1.05), March 5 (50 units at $1.06), and March 20 (50 units at $1.08) receipts. Total drawback attributable to withdrawals for export in this example would be $286.50.

(4) Average —(i) General. The average method is the method by which fungible merchandise or articles are identified on the basis of the calculation by recordkeeping of the amount of drawback that may be attributed to each unit of merchandise or articles in the inventory. In this method, the ratio of:

(A) The total units of a particular receipt of the fungible merchandise in the inventory at the time of a withdrawal to;

(B) The total units of all receipts of the fungible merchandise (including each receipt into inventory) at the time of the withdrawal;

(C) Is applied to the withdrawal, so that the withdrawal consists of a proportionate quantity of units from each particular receipt and each receipt is correspondingly decreased. Withdrawals and corresponding decreases to receipts are rounded to the nearest whole number.

(ii) Example. In the example in paragraph (c)(1)(ii) of this section, the drawback attributable to the 100 units withdrawn for export on the 20th is a total of $133 (50 units from the receipt on the 15th with $2 drawback attributable per unit, 33 units from the receipt on the 2nd with $1 drawback attributable per unit, and 17 units from the receipt on the 5th with $0 drawback attributable per unit). The basis of the foregoing and the effects on the inventory of the receipts and withdrawals, and balance in the inventory thereafter are as follows: On the 2nd of the month the receipt of 100 units ($1 drawback/unit) results in a balance of that amount; the receipt of 50 units ($0 drawback/unit) on the 5th results in a balance of 150 units (100 with $1 drawback/unit and 50 with $0 drawback/unit); the withdrawal on the 10th of 75 units (50 with $1 drawback/unit (applying the ratio of 100 units from the receipt on the 2nd to the total of 150 units at the time of withdrawal) and 25 with $0 drawback/unit (applying the ratio of 50 units from the receipt on the 5th to the total of 150 units at the time of withdrawal)) results in a balance of 75 units (with 50 with $1 drawback/unit and 25 with $0 drawback/unit, on the basis of the same ratios); the receipt of 75 units ($2 drawback/unit) on the 15th results in a balance of 150 units (50 with $1 drawback/unit, 25 with $0 drawback/unit, and 75 with $2 drawback/unit); the withdrawal on the 20th of 100 units (50 with $2 drawback/unit (applying the ratio of the 75 units from the receipt on the 15th to the total of 150 units at the time of withdrawal), 33 with $1 drawback/unit (applying the ratio of the 50 units remaining from the receipt on the 2nd to the total of 150 units at the time of withdrawal, and 17 with $0 drawback/unit (applying the ratio of the 25 units remaining from the receipt on the 5th to the total of 150 units at the time of withdrawal)) results in a balance of 50 units (25 with $2 drawback/unit, 17 with $1 drawback/unit, and 8 with $0 drawback/unit, on the basis of the same ratios).

(5) Inventory turn-over for limited purposes. A properly established average inventory turn-over period, as provided for in paragraph (c)(3)(iii)(C) of this section, may be used to determine:

(i) The fact and date(s) of use in manufacture or production of the designated imported merchandise and other (substituted) merchandise ( see 19 U.S.C. 1313(b)); or

(ii) The fact and date(s) of manufacture or production of the exported or destroyed articles ( see 19 U.S.C. 1313(a) and (b)).

(d) Approval of other accounting methods. (1) Persons proposing to use an accounting method for identification of merchandise or articles for drawback purposes which has not been previously approved for such use ( see paragraph (c) of this section), or which includes modifications from the methods listed in paragraph (c) of this section, may seek approval by CBP of the proposed accounting method under the provisions for obtaining an administrative ruling ( see part 177 of this chapter). The conditions applied and the criteria used by CBP in approving such an alternative accounting method, or a modification of one of the approved accounting methods, will be the criteria in paragraph (b) of this section, as well as those in paragraph (d)(2) of this section.

(2) In order for a proposed accounting method to be approved by CBP for purposes of this section, it must meet the following criteria:

(i) For purposes of calculations of drawback, the proposed accounting method must be either revenue neutral or favorable to the Government; and

(ii) The proposed accounting method should be:

(A) Generally consistent with commercial accounting procedures, as applicable for purposes of drawback;

(B) Consistent with inventory or material control records used in the ordinary course of business by the person proposing the method; and

(C) Easily administered by CBP.

§ 190.15 Recordkeeping.

Pursuant to 19 U.S.C. 1508(c)(3), all records which pertain to the filing of a drawback claim or to the information contained in the records required by 19 U.S.C. 1313 in connection with the filing of a drawback claim must be retained for 3 years after liquidation of such claims or longer period if required by law (under 19 U.S.C. 1508, the same records may be subject to a different period for different purposes).

§ 190.21 Direct identification manufacturing drawback.

Section 313(a) of the Act, as amended (19 U.S.C. 1313(a)), provides for drawback upon the exportation, or destruction under CBP supervision, of articles manufactured or produced in the United States with the use of imported merchandise, provided that those articles have not been used in the United States prior to such exportation or destruction. The amount of drawback allowable will not exceed 99 percent of the amount of duties, taxes, and fees paid with respect to the imported merchandise. However, duties may not be refunded upon the exportation or destruction of flour or by-products produced from imported wheat. Where two or more products result, drawback must be distributed among the products in accordance with their relative values, as defined in § 190.2, at the time of separation. Merchandise may be identified for drawback purposes under 19 U.S.C. 1313(a) in the manner provided for and prescribed in § 190.14.

§ 190.22 Substitution drawback.

(a)(1) General —(i) Substitution standard. If imported, duty-paid merchandise or merchandise classifiable under the same 8-digit HTSUS subheading number as the imported merchandise is used in the manufacture or production of articles within a period not to exceed 5 years from the date of importation of such imported merchandise, then upon the exportation, or destruction under CBP supervision, of any such articles, without their having been used in the United States prior to such exportation or destruction, drawback is provided for in section 313(b) of the Act, as amended (19 U.S.C. 1313(b)). Drawback is allowable even though none of the imported, duty-paid merchandise may actually have been used in the manufacture or production of the exported or destroyed articles. The amount of duties, taxes, and fees eligible for drawback is determined by per unit averaging, as defined in § 190.2, for any drawback claim based on 19 U.S.C. 1313(b).

(ii) Allowable refund —(A) Exportation. In the case of an article that is exported, the amount of drawback allowable will not exceed 99 percent of the lesser of:

( 1 ) The amount of duties, taxes, and fees paid with respect to the imported merchandise; or

( 2 ) The amount of duties, taxes, and fees that would apply to the substituted merchandise if the substituted merchandise were imported.

(B) Destruction. In the case of an article that is destroyed, the amount of drawback allowable will not exceed 99 percent of the lesser of:

( 1 ) The amount of duties, taxes, and fees paid with respect to the imported merchandise (after the value of the imported merchandise has been reduced by the value of materials recovered during destruction as provided in 19 U.S.C. 1313(x)); or

( 2 ) The amount of duties, taxes, and fees that would apply to the substituted merchandise if the substituted merchandise were imported (after the value of the imported merchandise has been reduced by the value of materials recovered during destruction as provided in 19 U.S.C. 1313(x)).

(C) Federal excise tax. For purposes of drawback of internal revenue tax imposed under Chapters 32, 38 (with the exception of Subchapter A of Chapter 38), 51, and 52 of the Internal Revenue Code of 1986, as amended (IRC), drawback granted on the export or destruction of substituted merchandise will be limited to the amount of taxes paid (and not returned by refund, credit, or drawback) on the substituted merchandise.

(2) Special rule for sought chemical elements —(i) Substitution standard. A sought chemical element, as defined in § 190.2, may be considered imported merchandise, or merchandise classifiable under the same 8-digit HTSUS subheading number as such imported merchandise, used in the manufacture or production of an article as described in paragraph (a)(1)(i) of this section, and it may be substituted for source material containing that sought chemical element, without regard to whether the sought chemical element and the source material are classifiable under the same 8-digit HTSUS subheading number, and apportioned quantitatively, as appropriate ( see § 190.26(b)(4)).

(ii) Allowable refund. The amount of drawback allowable will be determined in accordance with paragraph (a)(1)(ii) of this section. The value of the substituted source material must be determined based on the quantity of the sought chemical element present in the source material, as calculated per § 190.26(b)(4).

(b) Use by same manufacturer or producer at different factory. Duty-paid merchandise or drawback products used at one factory of a manufacturer or producer within 5 years after the date on which the material was imported may be designated as the basis for drawback on articles manufactured or produced in accordance with these regulations at other factories of the same manufacturer or producer.

(c) Designation. A manufacturer or producer may designate any eligible imported merchandise or drawback product which it has used in manufacture or production.

(d) Designation by successor —(1) General rule. Upon compliance with the requirements in this section and under 19 U.S.C. 1313(s), a drawback successor as defined in paragraph (d)(2) of this section may designate merchandise or drawback product used by a predecessor before the date of succession as the basis for drawback on articles manufactured or produced by the successor after the date of succession.

(2) Drawback successor. A “drawback successor” is a manufacturer or producer to whom another entity (predecessor) has transferred, by written agreement, merger, or corporate resolution:

(i) All or substantially all of the rights, privileges, immunities, powers, duties, and liabilities of the predecessor; or

(ii) The assets and other business interests of a division, plant, or other business unit of such predecessor, but only if in such transfer the value of the transferred realty, personalty, and intangibles (other than drawback rights, inchoate or otherwise) exceeds the value of all transferred drawback rights, inchoate or otherwise.

(3) Certifications and required evidence —(i) Records of predecessor. The predecessor or successor must certify that the successor is in possession of the predecessor's records which are necessary to establish the right to drawback under the law and regulations with respect to the merchandise or drawback product.

(ii) Merchandise not otherwise designated. The predecessor or successor must certify that the predecessor has not designated and will not designate, nor enable any other person to designate, such merchandise or product as the basis for drawback.

(iii) Value of transferred property. In instances in which assets and other business interests of a division, plant, or other business unit of a predecessor are transferred, the predecessor or successor must specify, and maintain supporting records to establish, the value of the drawback rights and the value of all other transferred property.

(iv) Review by CBP. The written agreement, merger, or corporate resolution, provided for in paragraph (d)(2) of this section, and the records and evidence provided for in paragraph (d)(3)(i) through (iii) of this section, must be retained by the appropriate party(s) for 3 years from the date of liquidation of the related claim and are subject to review by CBP upon request.

(e) Multiple products —(1) General. Where two or more products are produced concurrently in a substitution manufacturing operation, drawback will be distributed to each product in accordance with its relative value ( see § 190.2) at the time of separation.

(2) Claims covering a manufacturing period. Where the claim covers a manufacturing period rather than a manufacturing lot, the entire period covered by the claim is the time of separation of the products and the value per unit of product is the market value for the period (as provided for in the definition of relative value in § 190.2). Manufacturing periods in excess of one month may not be used without specific approval of CBP.

(3) Recordkeeping. Records must be maintained showing the relative value of each product at the time of separation.

§ 190.23 Methods and requirements for claiming drawback.

Claims must be based on one or more of the methods specified in paragraph (a) of this section and comply with all other requirements specified in this section.

(a) Method of claiming drawback. —(1) Used in. Drawback may be paid based on the amount of the imported or substituted merchandise used in the manufacture of the exported article, where there is no waste or the waste is valueless or unrecoverable. This method must be used when multiple products also necessarily and concurrently result from the manufacturing process, and there is no valuable waste ( see paragraph (a)(2) of this section).

(2) Used in less valuable waste. Drawback is allowable under this method based on the quantity of merchandise or drawback products used to manufacture the exported or destroyed article, reduced by an amount equal to the quantity of this merchandise that the value of the waste would replace. This method must be used when multiple products also necessarily and concurrently result from the manufacturing process, and there is valuable waste.

(3) Relative value. Drawback is also allowable under this method when two or more products result from manufacturing or production. The relative value method must be used when multiple products also necessarily and concurrently result from the manufacturing process, and drawback must be distributed among the products in accordance with their relative values (as defined in § 190.2) at the time of separation.

(4) Appearing in. Drawback is allowable under this method based only on the amount of imported or substituted merchandise that appears in (is contained in) the exported articles. The appearing in method may not be used if there are multiple products also necessarily and concurrently resulting from the manufacturing process.

(b) Abstract or schedule. A drawback claimant may use either the abstract or schedule method to show the quantity of material used or appearing in the exported or destroyed article. An abstract is the summary of records which shows the total quantity used in or appearing in all articles produced during the period covered by the abstract. A schedule shows the quantity of material actually used in producing, or appearing in, each unit of product. Manufacturers or producers submitting letters of notification of intent to operate under a general manufacturing drawback ruling ( see § 190.7) and applicants for approval of specific manufacturing drawback rulings ( see § 190.8) must state whether the abstract or schedule method is used; if no such statement is made, drawback claims must be based upon the abstract method.

(c) Claim for waste. —(1) Valuable waste. When the waste has a value and the drawback claim is not limited to the quantity of imported or substituted merchandise or drawback products appearing in the exported or destroyed articles claimed for drawback, the manufacturer or producer must keep records to show the market value of the merchandise or drawback products used to manufacture or produce the exported or destroyed articles, as well as the market value of the resulting waste, under the used in less valuable waste method (as provided for in the definition of relative value in § 190.2).

(2) If claim for waste is waived. If claim for waste is waived, only the “appearing in” basis may be used ( see paragraph (a)(4) of this section). Waste records need not be kept unless required to establish the quantity of imported duty-paid merchandise or drawback products appearing in the exported or destroyed articles claimed for drawback.

§ 190.24 Transfer of merchandise.

Evidence of any transfers of merchandise ( see § 190.10) must be evidenced by records, as defined in § 190.2.

§ 190.25 Destruction under CBP supervision.

A claimant may destroy merchandise and obtain drawback by complying with the procedures set forth in § 190.71 relating to destruction.

§ 190.26 Recordkeeping.

(a) Direct identification. (1) Records required. Each manufacturer or producer under 19 U.S.C. 1313(a) must keep records to allow the verifying CBP official to trace all articles manufactured or produced for exportation or destruction with drawback, from importation, through manufacture or production, to exportation or destruction. To this end, these records must specifically establish:

(i) The date or inclusive dates of manufacture or production;

(ii) The quantity, identity, and 8-digit HTSUS subheading number(s) of the imported duty-paid merchandise or drawback products used in or appearing in ( see § 190.23) the articles manufactured or produced;

(iii) The quantity, if any, of the non-drawback merchandise used, when these records are necessary to determine the quantity of imported duty-paid merchandise or drawback product used in the manufacture or production of the exported or destroyed articles or appearing in them;

(iv) The quantity and description of the articles manufactured or produced;

(v) The quantity of waste incurred, if applicable; and

(vi) That the articles on which drawback is claimed were exported or destroyed within 5 years after the importation of the duty-paid merchandise, without having been used in the United States prior to such exportation or destruction. (If the articles were commingled after manufacture or production, their identity may be maintained in the manner prescribed in § 190.14.)

(2) Accounting. The merchandise and articles to be exported or destroyed will be accounted for in a manner which will enable the manufacturer, producer, or claimant:

(i) To determine, and the CBP official to verify, the applicable import entry and any transfers of the merchandise associated with the claim; and

(ii) To identify with respect to that import entry, and any transfers of the merchandise, the imported merchandise or drawback products used in manufacture or production.

(b) Substitution. The records of the manufacturer or producer of articles manufactured or produced in accordance with 19 U.S.C. 1313(b) must establish the facts in paragraph (a)(1)(i), (iv) through (vi) of this section, and:

(1) The quantity, identity, and specifications of the merchandise designated (imported duty-paid, or drawback product);

(2) The quantity, identity, and specifications of the substituted merchandise before its use to manufacture or produce (or appearing in) the exported or destroyed articles;

(3) That, within 5 years after the date of importation of the imported duty-paid merchandise, the manufacturer or producer used the designated merchandise in manufacturing or production and that during the same5-year period it manufactured or produced the exported or destroyed articles; and

(4) If the designated merchandise is a sought chemical element, as defined in § 190.2, that was contained in imported material and a substitution drawback claim is made based on that chemical element:

(i) The duties, taxes, and fees paid on the imported material must be apportioned among its constituent components. The claim on the chemical element that is the designated merchandise must be limited to the duty apportioned to that element on a unit-for-unit attribution using the unit of measure set forth in the HTSUS that is applicable to the imported material. If the material is a compound with other constituents, including impurities, and the purity of the compound in the imported material is shown by satisfactory analysis, that purity, converted to a decimal equivalent of the percentage, is multiplied against the entered amount of the material to establish the amount of pure compound. The amount of the element in the pure compound is to be determined by use of the atomic weights of the constituent elements and converting to the decimal equivalent of their respective percentages and multiplying that decimal equivalent against the above-determined amount of pure compound.

(ii) The amount claimed as drawback based on the sought chemical element must be deducted from the amounts paid on the imported material that may be claimed on any other drawback claim.

Example to paragraph (b)(4): Synthetic rutile that is shown by appropriate analysis in the entry papers to be 91.7% pure titanium dioxide is imported and dutiable at a 5% ad valorem duty rate. The amount of imported synthetic rutile is 30,000 pounds with an entered value of $12,000. The total duty paid is $600. Titanium in the synthetic rutile is designated as the basis for a drawback claim under 19 U.S.C. 1313(b). The amount of titanium dioxide in the synthetic rutile is determined by converting the purity percentage (91.7%) to its decimal equivalent (.917) and multiplying the entered amount of synthetic rutile (30,000 pounds) by that decimal equivalent (.917 × 30,000 = 27,510 pounds of titanium dioxide contained in the 30,000 pounds of imported synthetic rutile). The titanium, based on atomic weight, represents 59.93% of the constituents in titanium dioxide. Multiplying that percentage, converted to its decimal equivalent, by the amount of titanium dioxide determines the titanium content of the imported synthetic rutile (.5993 × 27,510 pounds of titanium dioxide = 16,486.7 pounds of titanium contained in the imported synthetic rutile). Therefore, up to 16,486.7 pounds of titanium is available to be designated as the basis for drawback. As the per unit duty paid on the synthetic rutile is calculated by dividing the duty paid ($600) by the amount of imported synthetic rutile (30,000 pounds), the per unit duty is two cents of duty per pound of the imported synthetic rutile ($600 ÷ 30,000 = $0.02). The duty on the titanium is calculated by multiplying the amount of titanium contained in the imported synthetic rutile by two cents of duty per pound (16,486.7 × $0.02 = $329.73 duty apportioned to the titanium). The product is then multiplied by 99% to determine the maximum amount of drawback available ($329.73 × .99 = $326.44). If an exported titanium alloy ingot weighs 17,000 pounds, in which 16,000 pounds of titanium was used to make the ingot, drawback is determined by multiplying the duty per pound ($0.02) by the weight of the titanium contained in the ingot (16,000 pounds) to calculate the duty available for drawback ($0.02 × 16,000 = $320.00). Because only 99% of the duty can be claimed, drawback is determined by multiplying this available duty amount by 99% (.99 × $320.00 = $316.80). As the oxygen content of the titanium dioxide is 45% of the synthetic rutile, if oxygen is the designated merchandise on another drawback claim, 45% of the duty claimed on the synthetic rutile would be available for drawback based on the substitution of oxygen.

(c) Valuable waste records. When waste has a value and the manufacturer, producer, or claimant, has not limited the claims based on the quantity of imported or substituted merchandise appearing in the articles exported or destroyed, the manufacturer or producer must keep records to show the market value of the merchandise used to manufacture or produce the exported or destroyed article, as well as the quantity and market value of the waste incurred (as provided for in the definition of relative value in § 190.2). In such records, the quantity of merchandise identified or designated for drawback, under 19 U.S.C. 1313(a) or 1313(b), respectively, must be based on the quantity of merchandise actually used to manufacture or produce the exported or destroyed articles. The waste replacement reduction will be determined by reducing from the quantity of merchandise actually used by the amount of merchandise which the value of the waste would replace.

(d) Purchase of manufactured or produced articles for exportation or destruction. Where the claimant purchases articles from the manufacturer or producer and exports or destroys them, the claimant must maintain records to document the transfer of articles received.

(e) Multiple claimants —(1) General. Multiple claimants may file for drawback with respect to the same export or destruction (for example, if an automobile is exported, where different parts of the automobile have been produced by different manufacturers under drawback conditions and the exporter waives the right to claim drawback and assigns such right to the manufacturers under § 190.82).

(2) Procedures —(i) Submission of letter. Each drawback claimant must file a separate letter, as part of the claim, describing the component article to which each claim will relate. Each letter must show the name of the claimant and bear a statement that the claim will be limited to its respective component article. The exporter or destroyer must endorse the letters, as required, to show the respective interests of the claimants.

(ii) Blanket waivers and assignments of drawback rights. Exporters may waive and assign their drawback rights for all, or any portion, of their exportations with respect to a particular commodity for a given period to a drawback claimant.

(f) Retention of records. Pursuant to 19 U.S.C. 1508(c)(3), all records required to be kept by the manufacturer, producer, or claimant with respect to drawback claims, and records kept by others to complement the records of the manufacturer, producer, or claimant with respect to drawback claims must be retained for 3 years after the date of liquidation of the related claims (under 19 U.S.C. 1508, the same records may be subject to a different retention period for different purposes).

§ 190.27 Time limitations for manufacturing drawback.

(a) Direct identification. Drawback will be allowed on imported merchandise used to manufacture or produce articles that are exported or destroyed under CBP supervision within 5 years after importation of the merchandise identified to support the claim.

(b) Substitution. Drawback will be allowed on the imported merchandise if the following conditions are met:

(1) The designated merchandise is used in manufacture or production within 5 years after importation;

(2) Within the 5-year period described in paragraph (b)(1) of this section, the exported or destroyed articles, or drawback products, were manufactured or produced; and

(3) The completed articles must be exported or destroyed under CBP supervision within 5 years of the date of importation of the designated merchandise, or within 5 years of the earliest date of importation associated with a drawback product.

(c) Drawback claims filed before specific or general manufacturing drawback ruling approved or acknowledged. Drawback claims may be filed before the letter of notification of intent to operate under a general manufacturing drawback ruling covering the claims is acknowledged (§ 190.7), or before the specific manufacturing drawback ruling covering the claims is approved (§ 190.8), but no drawback will be paid until such acknowledgement or approval, as appropriate.

§ 190.28 Person entitled to claim manufacturing drawback.

The exporter (or destroyer) will be entitled to claim drawback, unless the exporter (or destroyer), by means of a certification, assigns the right to claim drawback to the manufacturer, producer, importer, or intermediate party. Such certification must accompany each claim and also affirm that the exporter (or destroyer) has not claimed and will not itself claim drawback or assign the right to claim drawback on the particular exportation or destruction to any other party. The certification provided for under this section may be a blanket certification for a stated period. Drawback is paid to the claimant, who may be the manufacturer, producer, intermediate party, importer, or exporter (or destroyer).

§ 190.29 Certification of bill of materials or formula.

At the time of filing a claim under 19 U.S.C. 1313(a) or (b), the claimant must certify the following:

(a) The claimant is in possession of the applicable bill of materials or formula for the exported or destroyed article(s), which will be promptly provided upon request;

(b) The bill of materials or formula identifies the imported and/or substituted merchandise and the exported or destroyed article(s) by their 8-digit HTSUS subheading numbers; and

(c) The bill of materials or formula identifies the manufactured quantities of the imported and/or substituted merchandise and the exported or destroyed article(s).

§ 190.31 Direct identification unused merchandise drawback.

(a) General. Section 313(j)(1) of the Act, as amended (19 U.S.C. 1313(j)(1)), provides for drawback upon the exportation or destruction under CBP supervision of imported merchandise upon which was paid any duty, tax, or fee imposed under Federal law upon entry or importation, if the merchandise has not been used within the United States before such exportation or destruction. The total amount of drawback allowable will not exceed 99 percent of the amount of duties, taxes, and fees paid with respect to the imported merchandise.

(b) Time of exportation or destruction. Drawback will be allowable on imported merchandise if, before the close of the 5-year period beginning on the date of importation and before the drawback claim is filed, the merchandise is exported from the United States or destroyed under CBP supervision.

(c) Operations performed on imported merchandise. The performing of any operation or combination of operations, not amounting to manufacture or production under the provisions of the manufacturing drawback law as provided for in 19 U.S.C. 1313(j)(3), on imported merchandise is not a use of that merchandise for purposes of this section.

§ 190.32 Substitution unused merchandise drawback.

(a) General. Section 313(j)(2) of the Act, as amended (19 U.S.C. 1313(j)(2)), provides for drawback of duties, taxes, and fees paid on imported merchandise based on the export or destruction under CBP supervision of substituted merchandise (as defined in § 190.2, pursuant to 19 U.S.C. 1313(j)(2)), before the close of the 5-year period beginning on the date of importation of the imported merchandise and before the drawback claim is filed, and before such exportation or destruction the substituted merchandise is not used in the United States ( see paragraph (e) of this section) and is in the possession of the party claiming drawback. The amount of duties, taxes, and fees eligible for drawback is determined by per unit averaging, as defined in 19 CFR 190.2, for any drawback claim based on 19 U.S.C. 1313(j)(2).

(b) Allowable refund —(1) Exportation. In the case of an article that is exported, subject to paragraph (b)(3) of this section, the total amount of drawback allowable will not exceed 99 percent of the lesser of:

(i) The amount of duties, taxes, and fees paid with respect to the imported merchandise; or

(ii) The amount of duties, taxes, and fees that would apply to the exported article if the exported article were imported.

(2) Destruction. In the case of an article that is destroyed, subject to paragraph (b)(3) of this section, the total amount of drawback allowable will not exceed 99 percent of the lesser of:

(i) The amount of duties, taxes, and fees paid with respect to the imported merchandise (after the value of the imported merchandise has been reduced by the value of materials recovered during destruction as provided in 19 U.S.C. 1313(x)); or

(ii) The amount of duties, taxes, and fees that would apply to the destroyed article if the destroyed article had been imported (after the value of the imported merchandise has been reduced by the value of materials recovered during destruction as provided in 19 U.S.C. 1313(x)).

(3) Federal excise tax. For purposes of drawback of internal revenue tax imposed under Chapters 32, 38 (with the exception of Subchapter A of Chapter 38), 51, and 52 of the Internal Revenue Code of 1986, as amended (IRC), drawback granted on the export or destruction of substituted merchandise will be limited to the amount of taxes paid (and not returned by refund, credit, or drawback) on the substituted merchandise.

(c) Determination of HTSUS classification for substituted merchandise. Requests for binding rulings on the classification of imported, substituted, or exported merchandise may be submitted to CBP pursuant to the procedures set forth in part 177.

(d) Claims for wine —(1) Alternative substitution standard. In addition to the 8-digit HTSUS substitution standard in § 190.2, drawback of duties, taxes, and fees, paid on imported wine as defined in § 190.2 may be allowable under 19 U.S.C. 1313(j)(2) with respect to wine if the imported wine and the exported wine are of the same color and the price variation between the imported wine and the exported wine does not exceed 50 percent.

(2) Allowable refund. For any drawback claim for wine (as defined in § 190.2) based on 19 U.S.C. 1313(j)(2), the total amount of drawback allowable will not exceed 99 percent of the duties, taxes, and fees paid with respect to the imported merchandise, without regard to the limitations in paragraph (b)(1) or (b)(2) of this section.

(3) Required certification. When the basis for substitution for wine drawback claims under 19 U.S.C. 1313(j)(2) is the alternative substitution standard rule set forth in (d)(1), claims under this subpart may be paid and liquidated if:

(i) The claimant specifies on the drawback entry that the basis for substitution is the alternative substitution standard for wine; and

(ii) The claimant provides a certification, as part of the complete claim ( see 190.51(a)), stating that:

(A) The imported wine and the exported wine are a Class 1 grape wine (as defined in 27 CFR 4.21(a)(1)) of the same color ( i.e., red, white, or rosé);

(B) The imported wine and the exported wine are table wines (as defined in 27 CFR 4.21(a)(2)) and the alcoholic content does not exceed 14 percent by volume; and

(C) The price variation between the imported wine and the exported wine does not exceed 50 percent.

(e) Operations performed on substituted merchandise. The performing of any operation or combination of operations, not amounting to manufacture or production as provided for in 19 U.S.C. 1313(j)(3)(B), on the substituted merchandise is not a use of that merchandise for purposes of this section.

(f) Designation by successor; 19 U.S.C. 1313(s) —(1) General rule. Upon compliance with the requirements of this section and under 19 U.S.C. 1313(s), a drawback successor as defined in paragraph (f)(2) of this section may designate either of the following as the basis for drawback on merchandise possessed by the successor after the date of succession:

(i) Imported merchandise which the predecessor, before the date of succession, imported; or

(ii) Imported and/or substituted merchandise that was transferred to the predecessor from the person who imported and paid duty on the imported merchandise.

(2) Drawback successor. A “drawback successor” is an entity to which another entity (predecessor) has transferred, by written agreement, merger, or corporate resolution:

(i) All or substantially all of the rights, privileges, immunities, powers, duties, and liabilities of the predecessor; or

(ii) The assets and other business interests of a division, plant, or other business unit of such predecessor, but only if in such transfer the value of the transferred realty, personalty, and intangibles (other than drawback rights, inchoate or otherwise) exceeds the value of all transferred drawback rights, inchoate or otherwise.

(3) Certifications and required evidence —(i) Records of predecessor. The predecessor or successor must certify that the successor is in possession of the predecessor's records which are necessary to establish the right to drawback under the law and regulations with respect to the imported and/or substituted merchandise.

(ii) Merchandise not otherwise designated. The predecessor or successor must certify that the predecessor has not designated and will not designate, nor enable any other person to designate, the imported and/or substituted merchandise as the basis for drawback.

(iii) Value of transferred property. In instances in which assets and other business interests of a division, plant, or other business unit of a predecessor are transferred, the predecessor or successor must specify, and maintain supporting records to establish, the value of the drawback rights and the value of all other transferred property.

(iv) Review by CBP. The written agreement, merger, or corporate resolution, provided for in paragraph (f)(2) of this section, and the records and evidence provided for in paragraph (f)(3)(i) through (iii) of this section, must be retained by the appropriate party(s) for 3 years from the date of liquidation of the related claim and are subject to review by CBP upon request.

§ 190.33 Person entitled to claim unused merchandise drawback.

(a) Direct identification. (1) Under 19 U.S.C. 1313(j)(1), as amended, the exporter or destroyer will be entitled to claim drawback.

(2) The exporter or destroyer may waive the right to claim drawback and assign such right to the importer or any intermediate party. A drawback claimant under 19 U.S.C. 1313(j)(1) other than the exporter or destroyer must secure and retain a certification signed by the exporter or destroyer waiving the right to claim drawback, and stating that it did not and will not authorize any other party to claim the exportation or destruction for drawback ( see § 190.82). The certification provided for under this section may be a blanket certification for a stated period. The claimant must file such certification with each claim.

(b) Substitution. (1) Under 19 U.S.C. 1313(j)(2), as amended, the following parties may claim drawback:

(i) In situations where the exporter or destroyer of the substituted merchandise is also the importer of the imported merchandise, that party will be entitled to claim drawback.

(ii) In situations where the person who imported and paid the duty on the imported merchandise transfers the imported merchandise, substituted merchandise, or any combination of imported and substituted merchandise to the person who exports or destroys that merchandise, the exporter or destroyer will be entitled to claim drawback. (Any such transferred merchandise, regardless of its origin, will be treated as imported merchandise for purposes of drawback under 19 U.S.C. 1313(j)(2), and any retained merchandise will be treated as domestic merchandise.)

(iii) In situations where the transferred merchandise described in paragraph (b)(1)(ii) of this section is the subject of further transfer(s), such transfer(s) must be documented by records, including records kept in the normal course of business, and the exporter or destroyer will be entitled to claim drawback (multiple substitutions are not permitted).

(2) The exporter or destroyer may waive the right to claim drawback and assign such right to the importer or to any intermediate party, provided that the claimant had possession of the substituted merchandise prior to its exportation or destruction. A drawback claimant under 19 U.S.C. 1313(j)(2) other than the exporter or destroyer must secure and retain a certification signed by the exporter or destroyer that such party waived the right to claim drawback, and stating that it did not and will not authorize any other party to claim the exportation or destruction for drawback ( see § 190.82). The certification provided for under this section may be a blanket certification for a stated period. The claimant must file such certification with each claim.

§ 190.34 Transfer of merchandise.

Any transfer of merchandise ( see § 190.10) must be recorded in records, which may include records kept in the normal course of business, as defined in § 190.2.

§ 190.35 Notice of intent to export or destroy; examination of merchandise.

(a) Notice. A notice of intent to export or destroy merchandise which may be the subject of an unused merchandise drawback claim (19 U.S.C. 1313(j)) must be provided to CBP to give CBP the opportunity to examine the merchandise. The claimant or the exporter (for destruction under CBP supervision, see § 190.71) must file at the port of intended examination a Notice of Intent to Export, Destroy, or Return Merchandise for Purposes of Drawback on CBP Form 7553 at least 5 working days prior to the date of intended exportation unless CBP approves another filing period or the claimant has been granted a waiver of prior notice ( see § 190.91).

(b) Required information. The notice must certify that the merchandise has not been used in the United States before exportation or destruction. In addition, if applicable, the notice must provide the bill of lading number, if known, the name and telephone number, mailing address, and, if available, fax number and email address of a contact person, and the location of the merchandise.

(c) Decision to examine or to waive examination. Within 2 working days after receipt of the Notice of Intent to Export, Destroy, or Return Merchandise for Purposes of Drawback ( see paragraph (a) of this section), CBP will notify the party designated on the Notice in writing of CBP's decision to either examine the merchandise to be exported, or to waive examination. If CBP timely notifies the designated party, in writing, of its decision to examine the merchandise ( see paragraph (d) of this section), but the merchandise is exported without having been presented to CBP for examination, any drawback claim, or part thereof, based on the Notice will be denied. If CBP notifies the designated party, in writing, of its decision to waive examination of the merchandise, or, if timely notification of a decision by CBP to examine or to waive examination has not been received, the merchandise may be exported without delay.

(d) Time and place of examination. If CBP gives timely notice of its decision to examine the exported merchandise, the merchandise to be examined must be promptly presented to CBP. CBP must examine the merchandise within 5 working days after presentation of the merchandise. The merchandise may be exported without examination if CBP fails to timely examine the merchandise after presentation to CBP. If the examination is to be completed at a port other than the port of actual exportation or destruction, the merchandise must be transported in-bond to the port of exportation or destruction.

(e) Extent of examination. The appropriate CBP office may permit release of merchandise without examination, or may examine, to the extent determined to be necessary, the items to be exported or destroyed.

§ 190.36 Failure to file Notice of Intent to Export, Destroy, or Return Merchandise for Purposes of Drawback.

(a) General; application. Merchandise which has been exported or destroyed without complying with the requirements of § 190.35(a), § 190.42(a), § 190.71(a), or § 190.91 may be eligible for unused merchandise drawback under 19 U.S.C. 1313(j) or under 19 U.S.C. 1313(c) subject to the following conditions:

(1) Application. The claimant must file a written application with the drawback office where the drawback claims will be filed. Such application must include the following:

(i) Required information.

(A) Name, address, and Internal Revenue Service (IRS) number (with suffix) of applicant;

(B) Name, address, and IRS number(s) (with suffix(es)) of exporter(s), if applicant is not the exporter;

(C) Export period covered by this application;

(D) Commodity/product lines of imported and exported merchandise covered in this application (and the applicable HTSUS numbers);

(E) The origin of the above merchandise;

(F) Estimated number of export transactions covered in this application;

(G) Estimated number of drawback claims and estimated time of filing those claims to be covered in this application;

(H) The port(s) of exportation;

(I) Estimated dollar value of potential drawback claims to be covered in this application;

(J) The relationship between the parties involved in the import and export transactions; and

(K) Provision(s) of drawback covered under the application;

(ii) Written declarations regarding:

(A) The reason(s) that CBP was not notified of the intent to export; and

(B) Whether the applicant, to the best of its knowledge, will have future exportations or destructions on which unused merchandise drawback might be claimed; and

(iii) A certification that the following documentary evidence will be made available for CBP to review upon request:

(A) For the purpose of establishing that the imported merchandise was not used in the United States (for purposes of drawback under 19 U.S.C. 1313(j)(1)) or that the exported or destroyed merchandise was not used in the United States and satisfied the requirements for substitution with the imported merchandise (for purposes of drawback under 19 U.S.C. 1313(j)(2)), and, as applicable:

( 1 ) Records;

( 2 ) Any laboratory records prepared in the ordinary course of business; and/or

( 3 ) Inventory records prepared in the ordinary course of business tracing all relevant movements and storage of the imported merchandise, substituted merchandise, and/or exported merchandise; and

(B) Evidence establishing compliance with all other applicable drawback requirements.

(2) One-time use. The procedure provided for in this section may be used by a claimant only once, unless good cause is shown (for example, successorship).

(3) Claims filed pending disposition of application. Drawback claims may be filed under this section pending disposition of the application. However, those drawback claims will not be processed or paid until the application is approved by CBP.

(b) CBP action. In order for CBP to evaluate the application under this section, CBP may request, and the applicant must provide, any of the information listed in paragraph (a)(1)(iii)(A)( 1 ) through ( 3 ) of this section. In making its decision to approve or deny the application under this section, CBP will consider factors such as, but not limited to, the following:

(1) Information provided by the claimant in the written application;

(2) Any of the information listed in paragraphs (a)(1)(iii)(A)( 1 ) through ( 3 ) of this section and requested by CBP under paragraph (b); and

(3) The applicant's prior record with CBP.

(c) Time for CBP action. CBP will notify the applicant in writing within 90 days after receipt of the application of its decision to approve or deny the application, or of CBP's inability to approve, deny or act on the application and the reason therefor.

(d) Appeal of denial of application. If CBP denies the application, the applicant may file a written appeal with the drawback office which issued the denial, provided that the applicant files this appeal within 30 days of the date of denial. If CBP denies this initial appeal, the applicant may file a further written appeal with CBP Headquarters, Office of Trade, Trade Policy and Programs, provided that the applicant files this further appeal within 30 days of the denial date of the initial appeal. CBP may extend the 30-day period for appeal to the drawback office or to CBP Headquarters, for good cause, if the applicant applies in writing for such extension within the appropriate 30-day period above.

(e) Future intent to export or destroy unused merchandise. If an applicant states it will have future exportations or destructions on which unused merchandise drawback may be claimed ( see paragraph (a)(1)(ii)(B) of this section), the applicant will be informed of the procedures for waiver of prior notice ( see § 190.91). If the applicant seeks waiver of prior notice under § 190.91, any documentation submitted to CBP to comply with this section will be included in the request under § 190.91. An applicant that states that it will have future exportations or destructions on which unused merchandise drawback may be claimed ( see paragraph (a)(1)(ii)(B) of this section) and which does not obtain waiver of prior notice must notify CBP of its intent to export or destroy prior to each such exportation or destruction, in accordance with § 190.35.

§ 190.37 Destruction under CBP supervision.

A claimant may destroy merchandise and obtain unused merchandise drawback by complying with the procedures set forth in § 190.71 relating to destruction.

§ 190.38 Recordkeeping.

(a) Maintained by claimant; by others. Pursuant to 19 U.S.C. 1508(c)(3), all records which are necessary to be maintained by the claimant under this part with respect to drawback claims, and records kept by others to complement the records of the claimant, which are essential to establish compliance with the legal requirements of 19 U.S.C. 1313(j)(1) or (j)(2), as applicable, and this part with respect to drawback claims, must be retained for 3 years after liquidation of such claims (under 19 U.S.C. 1508, the same records may be subject to a different retention period for different purposes).

(b) Accounting for the merchandise. Merchandise subject to drawback under 19 U.S.C. 1313(j)(1) and (j)(2) must be accounted for in a manner which will enable the claimant:

(1) To determine, and CBP to verify, the applicable import entry or transfer(s) of drawback-eligible merchandise;

(2) To determine, and CBP to verify, the applicable exportation or destruction; and

(3) To identify, with respect to the import entry or any transfer(s) of drawback-eligible merchandise, the imported merchandise designated as the basis for the drawback claim.

§ 190.41 Rejected merchandise drawback.

Section 313(c) of the Act, as amended (19 U.S.C. 1313(c)), provides for drawback upon the exportation or destruction under CBP supervision of imported merchandise which has been entered, or withdrawn from warehouse, for consumption, duty-paid, and which: Does not conform to sample or specifications; has been shipped without the consent of the consignee; or has been determined to be defective as of the time of importation; or ultimately sold at retail by the importer or the person who received the merchandise from the importer, and for any reason returned to and accepted by the importer or the person who received the merchandise from the importer. The total amount of drawback allowable will be 99 percent of the amount of duties paid with respect to the imported, duty-paid merchandise. See subpart P of this part for drawback of internal revenue taxes for unmerchantable or nonconforming distilled spirits, wines, or beer.

§ 190.42 Procedures and supporting documentation.

(a) Time limit for exportation or destruction. Drawback will be denied on merchandise that is exported or destroyed after the statutory 5-year time period.

(b) Required documentation. The claimant must submit documentation to CBP as part of the complete drawback claim ( see § 190.51) to establish that the merchandise did not conform to sample or specification, was shipped without the consent of the consignee, or was defective as of the time of importation ( see § 190.45 for additional requirements for claims made on rejected retail merchandise under 19 U.S.C. 1313(c)(1)(C)(ii)). If the claimant was not the importer, the claimant must also:

(1) Submit a statement signed by the importer and every other person, other than the ultimate purchaser, that owned the goods, that no other claim for drawback was made on the goods by any other person; and

(2) Certify that records are available to support the statement required in paragraph (b)(1) of this section.

(c) Notice. A notice of intent to export or destroy merchandise which may be the subject of a rejected merchandise drawback claim (19 U.S.C. 1313(c)) must be provided to CBP to give CBP the opportunity to examine the merchandise. The claimant, or the exporter (for destruction under CBP supervision, see § 190.71), must file at the port of intended redelivery to CBP custody a Notice of Intent to Export, Destroy, or Return Merchandise for Purposes of Drawback on CBP Form 7553 at least 5 working days prior to the date of intended return to CBP custody, unless the claimant has been granted a waiver of prior notice ( see § 190.91) or complies with the procedures for 1-time waiver in § 190.36.

(d) Required information. The notice must provide the bill of lading number, if known, the name and telephone number, mailing address, and, if available, fax number and email address of a contact person, and the location of the merchandise.

(e) Decision to waive examination. Within 2 working days after receipt of the Notice of Intent to Export, Destroy, or Return Merchandise for Purposes of Drawback ( see paragraph (c) of this section), CBP will notify, in writing, the party designated on the Notice of CBP's decision to either examine the merchandise to be exported or destroyed, or to waive examination. If CBP timely notifies the designated party, in writing, of its decision to examine the merchandise ( see paragraph (f) of this section), but the merchandise is exported or destroyed without having been presented to CBP for such examination, any drawback claim, or part thereof, based on the Notice of Intent to Export, Destroy, or Return Merchandise for Purposes of Drawback, must be denied. If CBP notifies the designated party, in writing, of its decision to waive examination of the merchandise, or, if timely notification of a decision by CBP to examine or to waive examination is absent, the merchandise may be exported or destroyed without delay and will be deemed to have been returned to CBP custody.

(f) Time and place of examination. If CBP gives timely notice of its decision to examine the merchandise to be exported or destroyed, the merchandise to be examined must be promptly presented to CBP. CBP must examine the merchandise within 5 working days after presentation of the merchandise. The merchandise may be exported or destroyed without examination if CBP fails to timely examine the merchandise after presentation to CBP, and in such case the merchandise will be deemed to have been returned to CBP custody. If the examination is to be completed at a port other than the port of actual exportation or destruction, the merchandise must be transported in-bond to the port of exportation or destruction.

(g) Extent of examination. The appropriate CBP office may permit release of merchandise without examination, or may examine, to the extent determined to be necessary, the items exported or destroyed.

(h) Drawback claim. When filing the drawback claim, the drawback claimant must correctly calculate the amount of drawback due ( see § 190.51(b)). The procedures for restructuring a claim ( see § 190.53) apply to rejected merchandise drawback if the claimant has an ongoing export program which qualifies for this type of drawback.

(i) Exportation. Claimants must provide documentary evidence of exportation ( see subpart G of this part). The claimant may establish exportation by mail as set out in § 190.74.

§ 190.43 Unused merchandise drawback claim.

Rejected merchandise may be the subject of an unused merchandise drawback claim under 19 U.S.C. 1313(j)(1), in accordance with subpart C of this part, to the extent that the merchandise qualifies therefor.

§ 190.45 Returned retail merchandise.

(a) Special rule for substitution. Section 313(c)(1)(C)(ii) of the Tariff Act of 1930, as amended (19 U.S.C. 1313(c)(1)(C)(ii)), provides for drawback upon the exportation or destruction under CBP supervision of imported merchandise which has been entered, or withdrawn from warehouse, for consumption, duty-paid and ultimately sold at retail by the importer, or the person who received the merchandise from the importer, and for any reason returned to and accepted by the importer, or the person who received the merchandise from the importer.

(b) Eligibility requirements. (1) Drawback is allowable pursuant to compliance with all requirements set forth in this subpart; and

(2) The claimant must also show by evidence satisfactory to CBP that drawback may be claimed by—

(i) Designating an entry of merchandise that was imported within 1 year before the date of exportation or destruction of the merchandise described in paragraph (a) under CBP supervision.

(ii) Certifying that the same 8-digit HTSUS subheading number and specific product identifier (such as part number, SKU, or product code) apply to both the merchandise designated for drawback (in the import documentation) and the returned merchandise.

(c) Allowable refund. The total amount of drawback allowable will not exceed 99 percent of the amount of duties paid with respect to the imported merchandise.

(d) Denial of claims. No drawback will be refunded if CBP is not satisfied that the claimant has provided, upon request, the documentation necessary to support the certification required in paragraph (b)(2)(ii) of this section.

§ 190.51 Completion of drawback claims.

(a) General —(1) Complete claim. Unless otherwise specified, a complete drawback claim under this part will consist of the successful electronic transmission to CBP of the drawback entry (as described in paragraph (a)(2) of this section), applicable Notice(s) of Intent to Export, Destroy, or Return Merchandise for Purposes of Drawback on CBP Form 7553, applicable import entry data, and evidence of exportation or destruction as provided for under subpart G of this part.

(2) Drawback entry. The drawback entry is to be filed through a CBP-authorized electronic system and must include the following:

(i) Claimant identification number;

(ii) Broker identification number (if applicable);

(iii) If requesting accelerated payment under § 190.92, surety code and bond type (and, for single transaction bonds, also the bond number and amount of bond);

(iv) Port code for the drawback office where the claim is being filed;

(v) Drawback entry number and provision(s) under which drawback is claimed;

(vi) Statement of eligibility for applicable privileges (as provided for in subpart I of this part);

(vii) Amount of refund claimed for each of relevant duties, taxes, and fees (calculated to two decimal places);

(viii) For each designated import entry line item, the entry number and the line item number designating the merchandise, a description of the merchandise, a unique import tracing identification number(s) (ITIN) (used to associate the imported merchandise and any substituted merchandise with any intermediate products (if applicable) and the drawback-eligible exported or destroyed merchandise or finished article(s)), as well as the following information for the merchandise designated as the basis for the drawback claim: The 10-digit HTSUS classification, amount of duties paid, applicable entered value ( see 19 CFR 190.11(a)), quantity, and unit of measure (using the unit(s) of measure required under the HTSUS for substitution manufacturing and substitution unused merchandise drawback claims), as well as the types and amounts of any other duties, taxes, or fees for which a refund is requested;

(ix) For manufacturing claims under 19 U.S.C. 1313(a) or (b), each associated ruling number, along with the following information: Corresponding information for the factory location, the basis of the claim (as provided for in § 190.23), the date(s) of use of the imported and/or substituted merchandise in manufacturing or processing (or drawback product containing the imported or substituted merchandise), a description of and the 10-digit HTSUS classification for the drawback product or finished article that is manufactured or produced, the quantity and unit of measure for the drawback product or finished article that is manufactured or produced, the disposition of the drawback product or finished article that is manufactured or produced (transferred, exported, or destroyed), unique manufacture tracing identification number(s) (MTIN) (used to associate the manufactured merchandise, including any intermediate products, with the drawback-eligible exported or destroyed finished article(s)), and a certification from the claimant that provides as follows: “The article(s) described above were manufactured or produced and disposed of as stated herein in accordance with the drawback ruling on file with CBP and in compliance with applicable laws and regulations.”;

(x) Indicate whether the designated imported merchandise, other substituted merchandise, or finished article (for manufacturing claims) was transferred to the drawback claimant prior to the exportation or destruction of the eligible merchandise, and for unused merchandise drawback claims under 19 U.S.C. 1313(j), provide a certification from the client that provides as follows: “The undersigned hereby certifies that the exported or destroyed merchandise herein described is unused in the United States and further certifies that this merchandise was not subjected to any process of manufacture or other operation except the allowable operations as provided for by regulation.”;

(xi) Indicate whether the eligible merchandise was exported or destroyed and provide the applicable 10-digit HTSUS or Department of Commerce Schedule B classification, quantity, and unit of measure (the unit of measure specified must be the same as that which was required under the HTSUS for the designated imported merchandise in paragraph (viii) for substitution unused merchandise drawback claims) and, for claims under 19 U.S.C. 1313(c), specify the basis as one of the following:

(A) Merchandise does not conform to sample or specifications;

(B) Merchandise was defective at time of importation;

(C) Merchandise was shipped without consent of the consignee; or

(D) Merchandise sold at retail and returned to the importer or the person who received the merchandise from the importer;

(xii) For eligible merchandise that was exported, the unique export identifier (the number used to associate the export transaction with the appropriate documentary evidence of exportation), export destination, name of exporter, the applicable comparative value pursuant to § 190.11(b) ( see § 190.22(a)(1)(ii), § 190.22(a)(2)(ii), or § 190.32(b)) for substitution claims, and a certification from the claimant that provides as follows: “I declare, to the best of my knowledge and belief, that all of the statements in this document are correct and that the exported article is not to be relanded in the United States or any of its possessions without paying duty.”;

(xiii) For eligible merchandise that was destroyed, the name of the destroyer and, if substituted, the applicable comparative value pursuant to § 190.11(c) ( see § 190.22(a)(1)(ii), § 190.22(a)(2)(ii), or § 190.32(b)), and a certification from the claimant, if applicable, that provides as follows: “The undersigned hereby certifies that, for the destroyed merchandise herein described, the value of recovered materials (including the value of any tax benefit or royalty payment) that accrues to the drawback claimant has been deducted from the value of the imported (or substituted) merchandise designated by the claimant, in accordance with 19 U.S.C. 1313(x).”;

(xiv) For substitution unused merchandise drawback claims under 19 U.S.C. 1313(j)(2), a certification from the claimant that provides as follows: “The undersigned hereby certifies that the substituted merchandise is unused in the United States and that the substituted merchandise was in our possession prior to exportation or destruction.”;

(xv) For NAFTA and USMCA drawback claims provided for in subpart E of parts 181 and 182, the foreign entry number and date of entry, the HTSUS classification for the foreign entry, the amount of duties paid for the foreign entry and the applicable exchange rate, and, if applicable, a certification from the claimant that provides as follows: “Same condition—The undersigned certifies that the merchandise herein described is in the same condition as when it was imported under the above import entry(s) and further certifies that this merchandise was not subjected to any process of manufacture or other operation except the allowable operations as provided for by regulation.”; and

(xvi) All certifications required in this part and as otherwise deemed necessary by CBP to establish compliance with the applicable laws and regulations, as well as the following declaration: “The undersigned acknowledges statutory requirements that all records supporting the information on this document are to be retained by the issuing party for a period of 3 years from the date of liquidation of the drawback claim. All required documentation that must be uploaded in accordance with 19 CFR 190.51 will be provided to CBP within 24 hours of the filing of the drawback claim. The undersigned acknowledges that a false certification of the foregoing renders the drawback claim incomplete and subject to denial. The undersigned is fully aware of the sanctions provided in 18 U.S.C. 1001, and 18 U.S.C. 550, and 19 U.S.C. 1593a.”

(3) Election of line item designation for imported merchandise. Merchandise on a specific line on an entry summary may be designated for either direct identification or substitution claims but a single line on an entry summary may not be split for purposes of claiming drawback under both direct identification and substitution claims. The first complete drawback claim accepted by CBP which designates merchandise on a line on an entry summary establishes this designation for any remaining merchandise on that same line.

(4) Limitation on line item eligibility for imported merchandise. Claimants filing substitution drawback claims under part 190 for imported merchandise associated with a line item on an entry summary if any other merchandise covered on that entry summary has been designated as the basis of a claim under part 191 must provide additional information enabling CBP to verify the availability of drawback for the indicated merchandise and associated line item within 30 days of claim submission. The information to be provided will include, but is not limited to: summary document specifying the lines used and unused on the import entry; the import entry summary, corresponding commercial invoices, and copies of all drawback claims that previously designated the import entry summary; and post summary/liquidation changes (for imports or drawback claims, if applicable).

(b) Drawback due —(1) Claimant required to calculate drawback. Drawback claimants are required to correctly calculate the amount of drawback due. The amount of drawback requested on the drawback entry is generally to be 99 percent of the duties, taxes, and fees eligible for drawback. (For example, if $1,000 in import duties are eligible for drawback less 1 percent ($10), the amount claimed on the drawback entry should be for $990.) Claims exceeding 99 percent (or 100% when 100% of the duty is available for drawback) will not be paid until the calculations have been corrected by the claimant. Claims for less than 99 percent (or 100% when 100% of the duty is available for drawback) will be paid as filed, unless the claimant amends the claim in accordance with § 190.52(c). The amount of duties, taxes, and fees eligible for drawback is determined by whether a claim is based upon direct identification or substitution, as provided for below:

(i) Direct identification. The amounts eligible for drawback for a unit of merchandise consists of those duties, taxes, and fees that were paid for that unit of the designated imported merchandise. This may be the amount of duties, taxes, and fees actually tendered on that unit or those attributable to that unit, if identified pursuant to an approved accounting method ( see 19 CFR 190.14).

(ii) Substitution. The amount of duties, taxes, and fees eligible for drawback pursuant to 19 U.S.C. 1313(b) or 19 U.S.C. 1313(j)(2) is determined by per unit averaging, as defined in § 190.2. The amount that may be refunded is also subject to the limitations set forth in § 190.22(a)(1)(ii) (manufacturing claims) and § 190.32(b) (unused merchandise claims), as applicable.

(2) Merchandise processing fee apportionment calculation. Where a drawback claimant requests a refund of a merchandise processing fee paid pursuant to 19 U.S.C. 58c(a)(9)(A), the claimant is required to correctly apportion the fee to that imported merchandise for which drawback is claimed when calculating the amount of drawback requested on the drawback entry. This is determined as follows:

(i) Relative value ratio for each line item. The value of each line item of entered merchandise subject to a merchandise processing fee is calculated (to four decimal places) by dividing the value of the line item subject to the fee by the total value of entered merchandise subject to the fee. The result is the relative value ratio.

(ii) Merchandise processing fee apportioned to each line item. To apportion the merchandise processing fee to each line item, the relative value ratio for each line item is multiplied by the merchandise processing fee paid.

(iii) Amount of merchandise processing fee eligible for drawback per line item. The amount of merchandise processing fee apportioned to each line item is multiplied by 99 percent to calculate that portion of the fee attributable to each line item that is eligible for drawback.

(iv) Amount of merchandise processing fee eligible for drawback per unit of merchandise. To calculate the amount of a merchandise processing fee eligible for drawback per unit of merchandise, the line item amount that is eligible for drawback is divided by the number of units covered by that line item (to two decimal places).

(v) Limitation on amount of merchandise processing fee eligible for drawback for substitution claims. The amount of a merchandise processing fee eligible for drawback per unit of merchandise for drawback claims based upon substitution is subject to the limitations set forth in §§ 190.22(a)(1)(ii) (manufacturing claims) and 190.32(b) (unused merchandise claims), as applicable.

Example 1:

Line item 1—5,000 articles valued at $10 each total $50,000

Line item 2—6,000 articles valued at $15 each total $90,000

Line item 3—10,000 articles valued at $20 each total $200,000

Total units = 21,000

Total value = $340,000

Merchandise processing fee = $485 (for purposes of this example, the fee cap of $485 is assumed; see 19 CFR 24.23 for the current amount consistent with 19 U.S.C. 58c(a)(9)(B)(i)).

Line item relative value ratios. The relative value ratio for line item 1 is calculated by dividing the value of that line item by the total value ($50,000 ÷ 340,000 = .1471). The relative value ratio for line item 2 is .2647. The relative value ratio for line item 3 is .5882.

Merchandise processing fee apportioned to each line item. The amount of fee attributable to each line item is calculated by multiplying $485 by the applicable relative value ratio. The amount of the $485 fee attributable to line item 1 is $71.3435 (.1471 × $485 = $71.3435). The amount of the fee attributable to line item 2 is $128.3795 (.2647 × $485 = $128.3795). The amount of the fee attributable to line item 3 is $285.2770 (.5882 × $485 = $285.2770).

Amount of merchandise processing fee eligible for drawback per line item. The amount of merchandise processing fee eligible for drawback for line item 1 is $70.6301 (.99 × $71.3435). The amount of fee eligible for drawback for line item 2 is $127.0957 (.99 × $128.3795). The amount of fee eligible for drawback for line item 3 is $282.4242 (.99 × $285.2770).

Amount of merchandise processing fee eligible for drawback per unit of merchandise. The amount of merchandise processing fee eligible for drawback per unit of merchandise is calculated by dividing the amount of fee eligible for drawback for the line item by the number of units in the line item. For line item 1, the amount of merchandise processing fee eligible for drawback per unit is $.0141 ($70.6301 ÷ 5,000 = $.0141). If 1,000 widgets form the basis of a claim for drawback under 19 U.S.C. 1313(j), the total amount of drawback attributable to the merchandise processing fee is $14.10 (1,000 × .0141 = $14.10). For line item 2, the amount of fee eligible for drawback per unit is $.0212 ($127.0957 ÷ 6,000 = $.0212). For line item 3, the amount of fee eligible for drawback per unit is $.0282 ($282.4242 ÷ 10,000 = $.0282).

Example 2.

This example illustrates the treatment of dutiable merchandise that is exempt from the merchandise processing fee and duty-free merchandise that is subject to the merchandise processing fee.

Line item 1—700 meters of printed cloth valued at $10 per meter (total value $7,000) that is exempt from the merchandise processing fee under 19 U.S.C. 58c(b)(8)(B)(iii)

Line item 2—15,000 articles valued at $100 each (total value $1,500,000)

Line item 3—10,000 duty-free articles valued at $50 each (total value $500,000)

The relative value ratios are calculated using line items 2 and 3 only, as there is no merchandise processing fee imposed by reason of importation on line item 1.

Line item 2—1,500,000 ÷ 2,000,000 = .75 (line items 2 and 3 form the total value of the merchandise subject to the merchandise processing fee).

Line item 3—500,000 ÷ 2,000,000 = .25.

If the total merchandise processing fee paid was $485, the amount of the fee attributable to line item 2 is $363.75 (.75 × $485 = $363.75). The amount of the fee attributable to line item 3 is $121.25 (.25 × $485 = $121.25).

The amount of merchandise processing fee eligible for drawback for line item 2 is $360.1125 (.99 × $363.75). The amount of fee eligible for line item 3 is $120.0375 (.99 × $121.25).

The amount of drawback on the merchandise processing fee attributable to each unit of line item 2 is $.0240 ($360.1125 ÷ 15,000 = $.0240). The amount of drawback on the merchandise processing fee attributable to each unit of line item 3 is $.0120 ($120.0375 ÷ 10,000 = $.0120).

If 1,000 units of line item 2 were exported, the drawback attributable to the merchandise processing fee is $24.00 ($.0240 × 1,000 = $24.00).

(3) Calculations for all other duties, taxes, and fees —(i) General. Where a drawback claimant requests a refund of any other duties, taxes, and fees allowable in accordance with § 190.3, the claimant is required to accurately calculate (including apportionment using per unit averaging or inventory management methods, as appropriate) the duties, taxes, and fees attributable to the designated imported merchandise for which drawback is being claimed when calculating the amount of drawback requested on the drawback entry (generally 99% of the duties, taxes, and fees paid on the imported merchandise).

(ii) Examples. As illustrated in the examples in this paragraph, in the case of customs duties, the type of calculation required to determine the amount of duties available for refund (generally 99% of the duties paid on the imported merchandise) will vary depending on whether the duty involved is ad valorem, specific, or compound.

Example 1: Ad valorem duty rate.

Apportionment of the duties paid (and available for refund) will be based on the application of the duty rates to the per unit values of the imported merchandise. The per unit values are based on the invoice values unless the method of refund calculation is per unit averaging, which would require equal apportionment of the duties paid over the quantity of imported merchandise covered by the line item upon which the imported merchandise was reported on the import entry summary. As a result, the amount of duties available for refund will vary depending on the method used to calculate refunds.

Example 2: Specific duty rate.

No apportionment of the duties paid is required to determine the amount available for refund. A fixed duty rate is applicable to each unit of the imported merchandise based on quantity. This fixed rate will not vary based on the per unit values of the imported merchandise and, as a result, there is no impact on the amount of duties available for refunds (regardless of whether the refunds are calculated based on invoice values or per unit averaging).

Example 3: Compound duty rate.

A compound duty rate is a combination of an ad valorem duty rate and a specific duty rate, with both rates applied to the same imported merchandise. As a result, a combination of the calculations discussed in paragraphs (a) and (b) of this section will apply when calculating the amount of duties paid that are available for refund.

(4) Limitation. The amount of duties, taxes, and fees eligible for drawback per unit of merchandise for drawback claims based upon substituted merchandise is subject to the limitations set forth in § 190.22(a)(1)(ii) (manufacturing claims) and § 190.32(b) (unused merchandise claims), as applicable.

(c) HTSUS classification or Schedule B commodity number ( s) —(1) General. Drawback claimants are required to provide, on all drawback claims they submit, the 10-digit HTSUS classification or the Schedule B commodity number(s), for the following:

(i) Designated imported merchandise. For imported merchandise designated on drawback claims, the HTSUS classification applicable at the time of entry (e.g., as required to be reported on the applicable entry summary(s) and other entry documentation).

(ii) Substituted merchandise on manufacturing claims. For merchandise substituted on manufacturing drawback claims, and consistent with the applicable general manufacturing drawback ruling or the specific manufacturing drawback ruling, the applicable HTSUS classification numbers must be the same as either—

(A) If the substituted merchandise was imported, the HTSUS classification applicable at the time of entry (e.g., as required to be reported on the applicable entry summary(s) and other entry documentation); or,

(B) If the substituted merchandise was not imported, the HTSUS classification that would have been reported to CBP for the applicable entry summary(s) and other entry documentation, for the domestically produced substituted merchandise, at the time of entry of the designated imported merchandise.

(iii) Exported merchandise or articles. For exported merchandise or articles, the HTSUS classification or Schedule B commodity number(s) must be from the Electronic Export Information (EEI), when required. If no EEI is required ( see, 15 CFR part 30 subpart D for a complete list of exemptions), then the claimant must provide the Schedule B commodity number(s) or HTSUS number(s) that the exporter would have set forth on the EEI when the exportation took place, but for the exemption from the requirement for an EEI.

(iv) Destroyed merchandise or articles. For destroyed merchandise or articles, the HTSUS classification or Schedule B commodity number(s) must be reported, subject to the following:

(A) if the HTSUS classification is reported, then it must be the HTSUS classification that would have been applicable to the destroyed merchandise or articles if they had been entered for consumption at the time of destruction; or

(B) if the Schedule B commodity number is reported, then it must be the Schedule B commodity number that would have been reported for the destroyed merchandise or articles if the EEI had been required for an exportation at the time of destruction.

(2) Changes to classification. If the 10-digit HTSUS classification or the Schedule B commodity number(s) reported to CBP for the drawback claim are determined to be incorrect or otherwise in controversy after the filing of the drawback entry, then the claimant must notify the drawback office where the drawback claim was filed of the correct HTSUS classification or Schedule B commodity number or the nature of the controversy before the liquidation of the drawback entry.

(d) Method of filing. All drawback claims must be submitted through a CBP-authorized system.

(e) Time of filing —(1) General. A complete drawback claim is timely filed if it is successfully transmitted not later than 5 years after the date on which the merchandise designated as the basis for the drawback claim was imported and in compliance with all other applicable deadlines under this part.

(i) Official date of filing. The official date of filing is the date upon which CBP receives a complete claim, as provided in paragraph (a) of this section, via transmission through a CBP-authorized system, including the uploading of all required supporting documentation.

(ii) Abandonment. Claims not completed within the 5-year period after the date on which the merchandise designated as the basis for the drawback claim was imported will be considered abandoned. Except as provided in paragraph (e)(2) of this section, no extension will be granted unless it is established that CBP was responsible for the untimely filing.

(iii) Special timeframes. For substitution claims, the exportation or destruction of merchandise shall not have preceded the date of importation of the designated imported merchandise, and/or the exportation or destruction of merchandise shall not otherwise be outside of the timeframes specified in 19 U.S.C. 1313(c)(2)(C) and 19 U.S.C. 1313(p)(2), if applicable.

(2) Major disaster. The 5-year period for filing a complete drawback claim provided for in paragraph (e)(1) of this section may be extended for a period not to exceed 18 months if:

(i) The claimant establishes to the satisfaction of CBP that the claimant was unable to file the drawback claim because of an event declared by the President to be a major disaster, within the meaning given to that term in 42 U.S.C. 5122(2), on or after January 1, 1994; and

(ii) The claimant files a request for such extension with CBP no later than 1 year from the last day of the 5-year period referred to in paragraph (e)(1) of this section.

(3) Record retention. If an extension is granted with respect to a request filed under paragraph (e)(2)(ii) of this section, the periods of time for retaining records under 19 U.S.C. 1508(c)(3) will be extended for an additional 18 months.

§ 190.52 Rejecting, perfecting or amending claims.

(a) Rejecting the claim. Upon review of a drawback claim when transmitted in ACE, if the claim is determined to be incomplete ( see § 190.51(a)(1)) or untimely ( see § 190.51(e)), the claim will be rejected and CBP will notify the filer. The filer will then have the opportunity to complete the claim subject to the requirement for filing a complete claim within 5 years of the date of importation of the merchandise designated as the basis for the drawback claim (or within 3 years after the date of exportation of the articles upon which drawback is claimed for drawback pursuant to 19 U.S.C. 1313(d)). If it is later determined by CBP, subsequent to acceptance of the claim and upon further review, that the claim was incomplete or untimely, then it may be denied.

(b) Perfecting the claim; additional evidence required. If CBP determines that the claim is complete according to the requirements of § 190.51(a)(1), but that additional evidence or information is required, CBP will notify the filer. The claimant must furnish, or have the appropriate party furnish, the evidence or information requested within 30 days of the date of notification by CBP. CBP may extend this 30-day period if the claimant files a written request for such extension within the 30-day period and provides good cause. The evidence or information required under this paragraph may be filed more than 5 years after the date of importation of the merchandise designated as the basis for the drawback claim (or within 3 years after the date of exportation of the articles upon which drawback is claimed for drawback pursuant to 19 U.S.C. 1313(d)). Such additional evidence or information may include, but is not limited to:

(1) Records or other documentary evidence of exportation, as provided for in § 190.72, which shows that the articles were shipped by the person filing the drawback entry, or a letter of endorsement from the exporter which must be attached to such records or other documentary evidence, showing that the party filing the entry is authorized to claim drawback and receive payment (the claimant must have on file and make available to CBP upon request, the endorsement from the exporter assigning the right to claim drawback);

(2) A copy of the import entry and invoice annotated for the merchandise identified or designated;

(3) A copy of the export invoice annotated to indicate the items on which drawback is being claimed; and

(4) Records documenting the transfer of the merchandise including records kept in the normal course of business upon which the claim is based ( see § 190.10).

(c) Amending the claim; supplemental filing. Amendments to claims for which the drawback entries have not been liquidated must be made within 5 years of the date of importation of the merchandise designated as the basis for the drawback claim. Liquidated drawback entries may not be amended; however, they may be protested as provided for in § 190.84 and part 174 of this chapter.

§ 190.53 Restructuring of claims.

(a) General. CBP may require claimants to restructure their drawback claims in such a manner as to foster administrative efficiency. In making this determination, CBP will consider the following factors:

(1) The number of transactions of the claimant (imports and exports);

(2) The value of the claims;

(3) The frequency of claims;

(4) The product or products being claimed; and

(5) For 19 U.S.C. 1313(a) and 1313(b) claims, the provisions, as applicable, of the general manufacturing drawback ruling or the specific manufacturing drawback ruling.

(b) Exemption from restructuring; criteria. In order to be exempt from a restructuring, a claimant must demonstrate an inability or impracticability in restructuring its claims as required by CBP and must provide a mutually acceptable alternative. Criteria used in such determination will include a demonstration by the claimant of one or more of the following:

(1) Complexities caused by multiple commodities or the applicable general manufacturing drawback ruling or the specific manufacturing drawback ruling;

(2) Variable and conflicting manufacturing and inventory periods (for example, financial, accounting and manufacturing records maintained are significantly different);

(3) Complexities caused by multiple manufacturing locations;

(4) Complexities caused by difficulty in adjusting accounting and inventory records (for example, records maintained—financial or accounting—are significantly different); and/or

(5) Complexities caused by significantly different methods of operation.

§ 190.61 Verification of drawback claims.

(a) Authority. All claims are subject to verification by CBP.

(b) Method. CBP personnel will verify compliance with the law and this part, the accuracy of the related general manufacturing drawback ruling or specific manufacturing drawback ruling (as applicable), and the selected drawback claims. Verification may include an examination of all records relating to the transaction(s).

(c) Liquidation. When a claim has been selected for verification, liquidation will be postponed only on the drawback entry for the claim selected for verification. Postponement will continue in effect until the verification has been completed and a report is issued, subject to the limitation in 19 CFR 159.12(f). In the event that a substantial error is revealed during the verification, CBP may postpone liquidation of all related product line claims, or, in CBP's discretion, all claims made by that claimant.

(d) Errors in specific or general manufacturing drawback rulings —(1) Specific manufacturing drawback ruling; action by CBP. If verification of a drawback claim filed under a specific manufacturing drawback ruling ( see § 190.8) reveals errors or deficiencies in the drawback ruling or application therefor, the verifying CBP official will promptly inform CBP Headquarters (Attention: Entry Process and Duty Refunds Branch, Regulations and Rulings, Office of Trade).

(2) General manufacturing drawback ruling. If verification of a drawback claim filed under a general manufacturing drawback ruling ( see § 190.7) reveals errors or deficiencies in a general manufacturing drawback ruling, the letter of notification of intent to operate under the general manufacturing drawback ruling, or the acknowledgment of the letter of notification of intent, the verifying CBP official will promptly inform CBP Headquarters (Attention: Entry Process and Duty Refunds Branch, Regulations and Rulings, Office of Trade).

(3) Action by CBP Headquarters. CBP Headquarters will review the stated errors or deficiencies and take appropriate action ( see 19 U.S.C. 1625; 19 CFR part 177).

§ 190.62 Penalties.

(a) Criminal penalty. Any person who knowingly and willfully files any false or fraudulent entry or claim for the payment of drawback upon the exportation or destruction of merchandise or knowingly or willfully makes or files any false document for the purpose of securing the payment to himself or others of any drawback on the exportation or destruction of merchandise greater than that legally due, will be subject to the criminal provisions of 18 U.S.C. 550, 1001, or any other appropriate criminal sanctions.

(b) Civil penalty. Any person who seeks, induces or affects the payment of drawback, by fraud or negligence, or attempts to do so, is subject to civil penalties, as provided under 19 U.S.C. 1593a. A fraudulent violation is subject to a maximum administrative penalty of 3 times the total actual or potential loss of revenue. Repetitive negligent violations are subject to a maximum penalty equal to the actual or potential loss of revenue.

§ 190.63 Liability for drawback claims.

(a) Liability of claimants. Any person making a claim for drawback will be liable for the full amount of the drawback claimed.

(b) Liability of importers. An importer will be liable for any drawback claim made by another person with respect to merchandise imported by the importer in an amount equal to the lesser of:

(1) The amount of duties, taxes, and fees that the person claimed with respect to the imported merchandise; or

(2) The amount of duties, taxes, and fees that the importer authorized the other person to claim with respect to the imported merchandise.

(c) Joint and several liability. Persons described in paragraphs (a) and (b) of this section will be jointly and severally liable for the amount described in paragraph (b).

§ 190.71 Drawback on articles destroyed under CBP supervision.

(a) Procedure. At least 7 working days before the intended date of destruction of merchandise or articles upon which drawback is intended to be claimed, a Notice of Intent to Export, Destroy, or Return Merchandise for Purposes of Drawback on CBP Form 7553 must be filed by the claimant with the CBP port where the destruction is to take place, giving notification of the date and specific location where the destruction is to occur. Within 4 working days after receipt of the CBP Form 7553, CBP will advise the filer in writing of its determination to witness or not to witness the destruction. If the filer of the notice is not so notified within 4 working days, the merchandise may be destroyed without delay and will be deemed to have been destroyed under CBP supervision. Unless CBP determines to witness the destruction, the destruction of the articles following timely notification on CBP Form 7553 will be deemed to have occurred under CBP supervision. If CBP attends the destruction, CBP will certify on CBP Form 7553.

(b) Evidence of destruction. When CBP does not attend the destruction, the claimant must submit evidence that destruction took place in accordance with the Notice of Intent to Export, Destroy, or Return Merchandise for Purposes of Drawback on CBP Form 7553. The evidence must be issued by a disinterested third party (for example, a landfill operator). The type of evidence depends on the method and place of destruction, but must establish that the merchandise was, in fact, destroyed within the meaning of “destruction” in § 190.2.

(c) Completion of drawback entry. After destruction, the claimant must provide CBP Form 7553, certified by the CBP official witnessing the destruction in accordance with paragraph (a) of this section, to CBP as part of the complete drawback claim based on the destruction ( see § 190.51(a)). If CBP has not attended the destruction, the claimant must provide the evidence that destruction took place in accordance with the approved CBP Form 7553, as provided for in paragraph (b) of this section, as part of the complete drawback claim based on the destruction ( see § 190.51(a)).

(d) Deduction for value of recovered materials. Under 19 U.S.C. 1313(x), a destruction may include a process by which materials are recovered from imported merchandise or from an article manufactured from imported merchandise for drawback claims made pursuant to 19 U.S.C. 1313(a), (b), (c), and (j). In determining the amount of duties to be refunded as drawback to a claimant, the value of recovered materials (including the value of any tax benefit or royalty payment) that accrues to the drawback claimant must be deducted from the value of the imported merchandise that is destroyed, or from the value of the merchandise used, or designated as used, in the manufacture of the article.

§ 190.72 Proof of exportation.

(a) Required export data. Proof of exportation of articles for drawback purposes must establish fully the date and fact of exportation and the identity of the exporter by providing the following summary data as part of a complete claim ( see § 190.51) (in addition to providing prior notice of intent to export if applicable):

(1) Date of export;

(2) Name of exporter;

(3) Description of the goods;

(4) Quantity and unit of measure;

(5) Schedule B number or HTSUS number; and

(6) Country of ultimate destination.

(b) Supporting documentary evidence. The documents for establishing exportation (which may be records kept in the normal course of business) include, but are not limited to:

(1) Records or other documentary evidence of exportation (originals or copies) issued by the exporting carrier, such as a bill of lading, air waybill, freight waybill, Canadian Customs manifest, and/or cargo manifest;

(2) Records from a CBP-approved electronic export system of the United States Government (§ 190.73);

(3) Official postal records (originals or copies) which evidence exportation by mail (§ 190.74);

(4) Notice of lading for supplies on certain vessels or aircraft (§ 190.112); or

(5) Notice of transfer for articles manufactured or produced in the United States which are transferred to a foreign trade zone (§ 190.183).

§ 190.73 Electronic proof of exportation.

Records kept through an electronic export system of the United States Government may be presented as actual proof of exportation only if CBP has officially approved the use of that electronic export system as proof of compliance for drawback claims. Official approval will be published as a general notice in the Customs Bulletin.

§ 190.74 Exportation by mail.

If the merchandise on which drawback is to be claimed is exported by mail or parcel post, the official postal records (original or copies) which describe the mail shipment will be sufficient to prove exportation. The postal record must be identified on the drawback entry, and must be retained by the claimant in their records and made available to CBP upon request ( see § 190.51(a)).

§ 190.75 Exportation by the Government.

(a) Claim by U.S. Government. When a department, branch, agency, or instrumentality of the U.S. Government exports products with the intention of claiming drawback, it may establish the exportation in the manner provided in § 190.72 ( see § 190.4).

(b) Claim by supplier. When a supplier of merchandise to the Government or any of the parties specified in § 190.82 claims drawback, exportation must be established under § 190.72.

§ 190.81 Liquidation.

(a) Time of liquidation. Drawback entries may be liquidated after:

(1) Liquidation of the designated import entry or entries becomes final pursuant to paragraph (e) of this section; or

(2) Deposit of estimated duties on the imported merchandise and before liquidation of the designated import entry or entries.

(b) Claims based on estimated duties. (1) Drawback may be paid upon liquidation of a claim based on estimated duties if one or more of the designated import entries have not been liquidated, or the liquidation has not become final (because of a protest being filed) ( see also § 173.4(c) of this chapter), only if the drawback claimant and any other party responsible for the payment of liquidated import duties each files a written request for payment of each drawback claim, waiving any right to payment or refund under other provisions of law, to the extent that the estimated duties on the unliquidated import entry are included in the drawback claim for which drawback on estimated duties is requested under this paragraph. The drawback claimant must, to the best of its knowledge, identify each import entry that has been protested and that is included in the drawback claim. A drawback entry, once finally liquidated on the basis of estimated duties pursuant to paragraph (e)(2) of this section, will not be adjusted by reason of a subsequent final liquidation of the import entry.

(2) However, if final liquidation of the import entry discloses that the total amount of import duty is different from the total estimated duties deposited, except in those cases when drawback is 100% of the duty, the party responsible for the payment of liquidated duties, as applicable, will:

(i) Be liable for 1 percent of all increased duties found to be due on that portion of merchandise recorded on the drawback entry; or

(ii) Be entitled to a refund of 1 percent of all excess duties found to have been paid as estimated duties on that portion of the merchandise recorded on the drawback entry.

(c) Claims based on voluntary tenders or other payments of duties —(1) General. Subject to the requirements in paragraph (2) of this section, drawback may be paid upon liquidation of a claim based on voluntary tenders of the unpaid amount of lawful ordinary customs duties or any other payment of lawful ordinary customs duties for an entry, or withdrawal from warehouse, for consumption ( see § 190.3(a)(1)(iii)), provided that:

(i) The tender or payment is specifically identified as duty on a specifically identified entry, or withdrawal from warehouse, for consumption;

(ii) Liquidation of the specifically identified entry, or withdrawal from warehouse, for consumption became final prior to such tender or payment; and

(iii) Liquidation of the drawback entry in which that specifically identified import entry, or withdrawal from warehouse, for consumption is designated has not become final.

(2) Written request and waiver. Drawback may be paid on claims based on voluntary tenders or other payments of duties under this subsection only if the drawback claimant and any other party responsible for the payment of the voluntary tenders or other payments of duties each files a written request for payment of each drawback claim based on such voluntary tenders or other payments of duties, waiving any claim to payment or refund under other provisions of law, to the extent that the voluntary tenders or other payment of duties under this paragraph are included in the drawback claim for which drawback on the voluntary tenders or other payment of duties is requested under this paragraph.

(d) Claims based on liquidated duties. Drawback will be based on the final liquidated duties paid that have been made final by operation of law (except in the case of the written request for payment of drawback on the basis of estimated duties, voluntary tender of duties, and other payments of duty, and waiver, provided for in paragraphs (b) and (c) of this section).

(e) Liquidation procedure. (1) General. When the drawback claim has been completed by the filing of the entry and other required documents, and exportation (or destruction) of the merchandise or articles has been established, CBP will determine drawback due on the basis of the complete drawback claim, the applicable general manufacturing drawback ruling or specific manufacturing drawback ruling, and any other relevant evidence or information. Notice of liquidation will be given electronically as provided in §§ 159.9 and 159.10(c)(3) of this chapter.

(2) Liquidation by operation of law. (i) Liquidated import entries. A drawback claim that satisfies the requirements of paragraph (d) that is not liquidated within 1 year from the date of the drawback claim ( see § 190.51(e)(1)(i)) will be deemed liquidated for the purpose of the drawback claim at the drawback amount asserted by the claimant or claim, unless the time for liquidation is extended in accordance with § 159.12 or if liquidation is suspended as required by statute or court order.

(ii) Unliquidated import entries. A drawback claim that satisfies the requirements of paragraphs (b) or (c) of this section will be deemed liquidated upon the deposit of estimated duties on the unliquidated imported merchandise ( see § 190.81(b)).

(f) Relative value; multiple products —(1) Distribution. Where two or more products result from the manufacture or production of merchandise, drawback will be distributed to the several products in accordance with their relative values at the time of separation.

(2) Values. The values to be used in computing the distribution of drawback where two or more products result from the manufacture or production of merchandise under drawback conditions must be the market value (as provided for in the definition of relative value in § 190.2), unless other values are approved by CBP.

(g) Payment. CBP will authorize the amount of the refund due as drawback to the claimant.

§ 190.82 Person entitled to claim drawback.

Unless otherwise provided in this part ( see §§ 190.42(b), 190.162, 190.175(a), 190.186), the exporter (or destroyer) will be entitled to claim drawback, unless the exporter (or destroyer), by means of a certification, waives the right to claim drawback and assigns such right to the manufacturer, producer, importer, or intermediate party (in the case of drawback under 19 U.S.C. 1313(j)(1) and (2), see § 190.33(a) and (b)). Such certification must also affirm that the exporter (or destroyer) has not assigned and will not assign the right to claim drawback on the particular exportation or destruction to any other party. The certification provided for in this section may be a blanket certification for a stated period.