2013/490/EU, Euratom: Council and Commission Decision of 22 July 2013 on the conclusion of the Stabilisation and Association Agreement between the European Communities and their Member States, of the one part, and the Republic of Serbia, of the other part
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
The Stabilisation and Association Agreement between the European Communities and their Member States, of the one part, and the Republic of Serbia, of the other part, the Annexes and Protocols annexed thereto, as well as the joint declarations and the declaration by the Community attached to the Final Act, are hereby approved on behalf of the European Union and the European Atomic Energy Community. The text of the Agreement is attached to this Decision.
1. An Association is hereby established between the Community and its Member States, of the one part, and the Republic of Serbia of the other part. 2. The aims of this Association are: (a) to support the efforts of Serbia to strengthen democracy and the rule of law; (b) to contribute to political, economic and institutional stability in Serbia, as well as to the stabilisation of the region; (c) to provide an appropriate framework for political dialogue, allowing the development of close political relations between the Parties; (d) to support the efforts of Serbia to develop its economic and international cooperation, including through the approximation of its legislation to that of the Community; (e) to support the efforts of Serbia to complete the transition into a functioning market economy; (f) to promote harmonious economic relations and gradually develop a free trade area between the Community and Serbia; (g) to foster regional cooperation in all the fields covered by this Agreement.
The President of the Council shall, on behalf of the Union, make the following notification: ‘As a consequence of the entry into force of the Treaty of Lisbon on 1 December 2009, the European Union has replaced and succeeded the European Community and from that date exercises all rights and assumes all obligations of the European Community. Therefore, references to ‘the European Community’ in the text of the Agreement are, where appropriate, to be read as ‘the European Unon’.’.
Respect for democratic principles and human rights as proclaimed in the Universal Declaration of Human Rights and as defined in the Convention for the Protection of Human Rights and Fundamental Freedoms, in the Helsinki Final Act and the Charter of Paris for a New Europe, respect for principles of international law, including full cooperation with the International Criminal Tribunal for the former Yugoslavia (ICTY), and the rule of law as well as the principles of market economy as reflected in the Document of the CSCE Bonn Conference on Economic Cooperation, shall form the basis of the domestic and external policies of the Parties and constitute essential elements of this Agreement.
1. The position to be taken by the Union or by the European Atomic Energy Community within the Stabilisation and Association Council and within the Stabilisation and Association Committee when the latter is empowered to act by the Stabilisation and Association Council shall be determined by the Council, on a proposal from the Commission, or, where appropriate, by the Commission, each in accordance with the corresponding provisions of the Treaties. 2. The President of the Council shall, in accordance with Article 120 of the Agreement, preside over the Stabilisation and Association Council. A representative of the Commission shall preside over the Stabilisation and Association Committee, in accordance with the Rules of Procedure thereof. 3. The decision to publish the decisions of the Stabilisation and Association Council and the Stabilisation and Association Committee in the Official Journal of the European Union shall be taken on a case-by-case basis by the Council or the Commission, each in accordance with the corresponding provisions of the Treaties.
The Parties consider that the proliferation of weapons of mass destruction (hereinafter also referred to as ‘WMD’) and their means of delivery, both to state and non-state actors, represents one of the most serious threats to international stability and security. The Parties therefore agree to cooperate and to contribute to countering the proliferation of weapons of mass destruction and their means of delivery through full compliance with and national implementation of their existing obligations under international disarmament and non-proliferation Treaties and Agreements and other relevant international obligations. The parties agree that this provision constitutes an essential element of this Agreement and will be part of the political dialogue that will accompany and consolidate these elements. The Parties furthermore agree to cooperate and to contribute to countering the proliferation of weapons of mass destruction and their means of delivery by: — taking steps to sign, ratify, or accede to, as appropriate, and fully implement all other relevant international instruments; — the establishment of an effective system of national export controls, controlling the export as well as the transit of WMD-related goods, including a WMD end-use control on dual use technologies and containing effective sanctions for breaches of export controls. Political dialogue on this matter may take place on a regional basis.
The President of the Council is hereby authorised to designate the person(s) empowered, on behalf of the European Union, to deposit the act of approval provided for in Article 138 of the Agreement. The President of the Commission shall deposit the said act of approval on behalf of the European Atomic Energy Community.
The contracting parties reaffirm the importance they attach to the implementation of international obligations, notably the full cooperation with ICTY.
This Decision shall enter into force on the date of its adoption.
International and regional peace and stability, the development of good neighbourly relations, human rights and the respect and protection of minorities are central to the Stabilisation and Association process referred to in the conclusions of the Council of the European Union on 21 June 1999. The conclusion and the implementation of this Agreement come within the framework of the conclusions of the Council of the European Union of 29 April 1997 and are based on the individual merits of Serbia.
Serbia commits itself to continue to foster cooperation and good neighbourly relations with the other countries of the region including an appropriate level of mutual concessions concerning the movement of persons, goods, capital and services as well as the development of projects of common interest, notably those related to border management and combating organised crime, corruption, money laundering, illegal migration and trafficking, including in particular in human beings, small arms and light weapons, as well as illicit drugs. This commitment constitutes a key factor in the development of the relations and cooperation between the Parties and thus contributes to regional stability.
The Parties reaffirm the importance that they attach to the fight against terrorism and the implementation of international obligations in this area.
The association shall be progressively and fully realised over a transitional period of a maximum of six years. The Stabilisation and Association Council (hereinafter also referred to as ‘SAC’) established under Article 119 shall regularly review, as a rule on an annual basis, the implementation of this Agreement and the adoption and implementation by Serbia of legal, administrative, institutional and economic reforms. This review shall be carried out in the light of the preamble and in accordance with the general principles of this Agreement. It shall take duly into account priorities set in the European Partnership relevant to this Agreement and be in coherence with the mechanisms established under the Stabilisation and Association process, notably the progress report on the Stabilisation and Association process. On the basis of this review, the SAC will issue recommendations and may take decisions. Where the review identifies particular difficulties, they may be referred to the mechanisms of dispute settlement established under this Agreement. The full association shall be progressively realised. No later than the third year after the entry into force of this Agreement, the SAC shall make a thorough review of the application of this Agreement. On the basis of this review the SAC shall evaluate progress made by Serbia and may take decisions governing the following stages of association. The aforementioned review will not apply to the free movement of goods, for which a specific schedule is foreseen in Title IV.
This Agreement shall be fully compatible with and implemented in a manner consistent with the relevant WTO provisions, in particular Article XXIV of the General Agreement on Tariffs and Trade 1994 (GATT 1994) and Article V of the General Agreement on Trade in Services (GATS).
1. Political dialogue between the Parties shall be further developed within the context of this Agreement. It shall accompany and consolidate the rapprochement between the European Union and Serbia and contribute to the establishment of close links of solidarity and new forms of cooperation between the Parties. 2. The political dialogue is intended to promote in particular: (a) full integration of Serbia into the community of democratic nations and gradual rapprochement with the European Union; (b) an increasing convergence of positions of the Parties on international issues, including CFSP issues, also through the exchange of information as appropriate, and, in particular, on those issues likely to have substantial effects on the Parties; (c) regional cooperation and the development of good neighbourly relations; (d) common views on security and stability in Europe, including cooperation in the areas covered by the CFSP of the European Union.
1. Political dialogue shall take place within the Stabilisation and Association Council, which shall have the general responsibility for any matter which the Parties might wish to put to it. 2. At the request of the Parties, political dialogue may also take place in the following forms: (a) meetings, where necessary, of senior officials representing Serbia, on the one hand, and the Presidency of the Council of the European Union, the Secretary-General/High Representative for the Common Foreign and Security Policy and the Commission of the European Communities (hereinafter referred to as ‘European Commission’), on the other; (b) taking full advantage of all diplomatic channels between the Parties, including appropriate contacts in third countries and within the United Nations, the OSCE, the Council of Europe and other international fora; (c) any other means which would make a useful contribution to consolidating, developing and stepping up this dialogue, including those identified in the Thessaloniki agenda, adopted in the Conclusions of the European Council in Thessaloniki on 19 and 20 June 2003.
A political dialogue at parliamentary level shall take place within the framework of the Stabilisation and Association Parliamentary Committee established under Article 125.
Political dialogue may take place within a multilateral framework, and as a regional dialogue including other countries of the region, including in the framework of the EU-Western Balkan forum.
In conformity with its commitment to international and regional peace and stability, and to the development of good neighbourly relations, Serbia shall actively promote regional cooperation. The Community assistance programmes may support projects having a regional or cross-border dimension through its technical assistance programmes. Whenever Serbia intends to enhance its cooperation with one of the countries mentioned in Articles 15, 16 and 17, it shall inform and consult the Community and its Member States according to the provisions laid down in Title X. Serbia shall implement fully the Central European Free Trade Agreement signed in Bucharest on 19 December 2006.
Cooperation with other countries having signed a Stabilisation and Association Agreement
After the signature of this Agreement, Serbia shall start negotiations with the countries which have already signed a Stabilisation and Association Agreement with a view to concluding bilateral conventions on regional cooperation, the aim of which shall be to enhance the scope of cooperation between the countries concerned. The main elements of these conventions shall be: (a) political dialogue; (b) the establishment of free trade areas, consistent with relevant WTO provisions; (c) mutual concessions concerning the movement of workers, establishment, supply of services, current payments and movement of capital as well as other policies related to movement of persons at an equivalent level to that of this Agreement; (d) provisions on cooperation in other fields whether or not covered by this Agreement, and notably the field of Justice, Freedom and Security. These conventions shall contain provisions for the creation of the necessary institutional mechanisms, as appropriate. These conventions shall be concluded within two years after the entry into force of this Agreement. Readiness by Serbia to conclude such conventions will be a condition for the further development of the relations between Serbia and the European Union. Serbia shall initiate similar negotiations with the remaining countries of the region once these countries will have signed a Stabilisation and Association Agreement.
Cooperation with other countries concerned by the Stabilisation and Association process
Serbia shall pursue regional cooperation with the other States concerned by the Stabilisation and Association process in some or all the fields of cooperation covered by this Agreement, and notably those of common interest. Such cooperation should always be compatible with the principles and objectives of this Agreement.
Cooperation with other countries candidate for EU accession not concerned by the Sap
1. Serbia should foster its cooperation and conclude a convention on regional cooperation with any country candidate for EU accession in any of the fields of cooperation covered by this Agreement. Such conventions should aim to gradually align bilateral relations between Serbia and that country with the relevant part of the relations between the Community and its Member States and that country. 2. Serbia shall start negotiations with Turkey which has established a customs union with the Community, with a view to concluding, on a mutually advantageous basis, an Agreement establishing a free trade area in accordance with Article XXIV of the GATT 1994 as well as liberalising the establishment and supply of services between them at an equivalent level of this Agreement in accordance with Article V of the GATS. These negotiations should be opened as soon as possible, with a view to concluding the abovementioned Agreement before the end of the transitional period referred to in Article 18(1).
1. The Community and Serbia shall gradually establish a bilateral free trade area over a period lasting a maximum of six years starting from the entry into force of this Agreement in accordance with the provisions of this Agreement and in conformity with those of the GATT 1994 and the WTO. In so doing they shall take into account the specific requirements laid down hereinafter. 2. The Combined Nomenclature shall be applied to the classification of goods in trade between the Parties. 3. For the purpose of this Agreement customs duties and charges having equivalent effect to customs duties include any duty or charge of any kind imposed in connection with the importation or exportation of a good, including any form of surtax or surcharge in connection with such importation or exportation, but do not include any: (a) charges equivalent to an internal tax imposed consistently with the provisions of paragraph 2 of Article III of the GATT 1994; (b) antidumping or countervailing measures; (c) fees or charges commensurate with the costs of services rendered. 4. For each product, the basic duty to which the successive tariff reductions set out in this Agreement are to be applied shall be: (a) the Community Common Customs Tariff, established pursuant to Council Regulation (EEC) No 2658/87 ( 3 ) actually applied erga omnes on the day of the signature of this Agreement; (b) the Serbian applied tariff ( 4 ) . 5. If, after the signature of this Agreement, any tariff reduction is applied on an erga omnes basis, in particular reductions resulting: (a) from the tariff negotiations in the WTO or, (b) in the event of the accession of Serbia to the WTO or, (c) from subsequent reductions after the accession of Serbia to the WTO, such reduced duties shall replace the basic duty referred to in paragraph 4 as from the date when such reductions are applied. 6. The Community and Serbia shall communicate to each other their respective basic duties and any changes thereof.
Definition
1. The provisions of this Chapter shall apply to products originating in the Community or in Serbia listed in Chapters 25 to 97 of the Combined Nomenclature, with the exception of the products listed in Annex I, paragraph I, (ii) of the WTO Agreement on Agriculture. 2. Trade between the Parties in products covered by the Treaty establishing the European Atomic Energy Community shall be conducted in accordance with the provisions of that Treaty.
Community concessions on industrial products
1. Customs duties on imports into the Community and charges having equivalent effect shall be abolished upon the entry into force of this Agreement on industrial products originating in Serbia. 2. Quantitative restrictions on imports into the Community and measures having equivalent effect shall be abolished upon the entry into force of this Agreement on industrial products originating in Serbia.
Serbian concessions on industrial products
1. Customs duties on imports into Serbia of industrial products originating in the Community other than those listed in Annex I shall be abolished upon the entry into force of this Agreement. 2. Charges having equivalent effect to customs duties on imports into Serbia shall be abolished upon the entry into force of this Agreement on industrial products originating in the Community. 3. Customs duties on imports into Serbia of industrial products originating in the Community which are listed in Annex I shall be progressively reduced and abolished in accordance with the timetable indicated in that Annex. 4. Quantitative restrictions on imports into Serbia of industrial products originating in the Community and measures having equivalent effect shall be abolished upon the date of entry into force of this Agreement.
Duties and restrictions on exports
1. The Community and Serbia shall abolish any customs duties on exports and charges having equivalent effect in trade between them upon the entry into force of this Agreement. 2. The Community and Serbia shall abolish between themselves any quantitative restrictions on exports and measures having equivalent effect upon the entry into force of this Agreement.
Faster reductions in customs duties
Serbia declares its readiness to reduce its customs duties in trade with the Community more rapidly than is provided for in Article 21 if its general economic situation and the situation of the economic sector concerned so permit. The Stabilisation and Association Council shall analyse the situation in this respect and make the relevant recommendations.
Definitions
1. The provisions of this Chapter shall apply to trade in agricultural and fishery products originating in the Community or in Serbia. 2. The term ‘agricultural and fishery products’ refers to the products listed in Chapters 1 to 24 of the Combined Nomenclature and the products listed in Annex I, paragraph I, (ii) of the WTO Agreement on Agriculture. 3. This definition includes fish and fishery products covered by Chapter 3, headings 1604 and 1605, and sub-headings 0511 91, 2301 20 and ex 1902 20 (‘stuffed pasta containing more than 20 % by weight of fish, crustaceans, molluscs or other aquatic invertebrates’).
Processed agricultural products
Protocol 1 lays down the trade arrangements for processed agricultural products which are listed therein.
Community concessions on imports of agricultural products originating in Serbia
1. From the date of entry into force of this Agreement, the Community shall abolish all quantitative restrictions and measures having equivalent effect, on imports of agricultural products originating in Serbia. 2. From the date of entry into force of this Agreement, the Community shall abolish the customs duties and charges having equivalent effect, on imports of agricultural products originating in Serbia other than those of headings 0102, 0201, 0202, 1701, 1702 and 2204 of the Combined Nomenclature. For the products covered by Chapters 7 and 8 of the Combined Nomenclature, for which the Common Customs Tariff provides for the application of ad valorem customs duties and a specific customs duty, the elimination applies only to the ad valorem part of the duty. 3. From the date of entry into force of this Agreement, the Community shall fix the customs duties applicable to imports into the Community of ‘baby beef’ products defined in Annex II and originating in Serbia at 20 % of the ad valorem duty and 20 % of the specific duty as laid down in the Common Customs Tariff, within the limit of an annual tariff quota of 8 700 tonnes expressed in carcass weight. 4. From the date of entry into force of this Agreement, the Community shall apply duty-free access on imports into the Community for products originating in Serbia of headings 1701 and 1702 of the Combined Nomenclature, within the limit of an annual tariff quota of 180 000 tonnes (net weight).
Serbian concessions on agricultural products
1. From the date of entry into force of this Agreement, Serbia shall abolish all quantitative restrictions and measures having equivalent effect, on imports of agricultural products originating in the Community. 2. From the date of entry into force of this Agreement, Serbia shall: (a) abolish the customs duties applicable on imports of certain agricultural products originating in the Community, listed in Annex III(a); (b) abolish progressively the customs duties applicable on imports of certain agricultural products originating in the Community, listed in Annex III(b) in accordance with the timetable indicated for each product in that Annex; (c) reduce progressively the customs duties applicable on imports of certain agricultural products originating in the Community, listed in Annex III (c) and (d) in accordance with the timetable indicated for each product in those Annexes;
Wine and Spirit drinks Protocol
The arrangements applicable to the wine and spirit drinks products referred to in Protocol 2 are laid down in that Protocol.
Community concessions on fish and fishery products
1. From the date of entry into force of this Agreement, the Community shall abolish all quantitative restrictions and measures having equivalent effect on imports of fish and fishery products originating in Serbia. 2. From the entry into force of this Agreement the Community shall eliminate all customs duties and measures having equivalent effect on fish and fishery products originating in Serbia other than those listed in Annex IV. Products listed in Annex IV shall be subject to the provisions laid down therein.
Serbian concessions on fish and fishery products
1. From the date of entry into force of this Agreement, Serbia shall abolish all quantitative restrictions and measures having equivalent effect on imports of fish and fishery products originating in the Community. 2. From the entry into force of this Agreement, Serbia shall eliminate all customs duties and measures having equivalent effect on fish and fishery products originating in the Community other than those listed in Annex V. Products listed in Annex V shall be subject to the provisions laid down therein.
Review clause
Taking account of the volume of trade in agricultural and fishery products between the Parties, of their particular sensitivities, of the rules of the Community common policies and of the policies for agriculture and fisheries in Serbia of the role of agriculture and fisheries in the economy of Serbia, of the consequences of the multilateral trade negotiations in the framework of the WTO as well as of the eventual accession of Serbia to the WTO, the Community and Serbia shall examine in the Stabilisation and Association Council, no later than three years after the entry into force of this Agreement, product by product and on an orderly and appropriate reciprocal basis, the opportunities for granting each other further concessions with a view to implementing greater liberalisation of the trade in agricultural and fishery products.
Safeguard clause concerning agriculture and fisheries
1. Notwithstanding other provisions of this Agreement, and in particular Article 41, given the particular sensitivity of the agricultural and fisheries markets, if imports of products originating in one Party, which are the subject of concessions granted pursuant to Articles 25, 26, 27, 28, 29 and 30, cause serious disturbance to the markets or to their domestic regulatory mechanisms, in the other Party, both Parties shall enter into consultations immediately to find an appropriate solution. Pending such solution, the Party concerned may take the appropriate measures it deems necessary. 2. In the event that imports originating in Serbia of products listed in Annex V of Protocol 3 cumulatively reach in volume 115 % of the average of the three previous calendar years, Serbia and the Community shall within five working days enter into consultations to analyse and evaluate the trade pattern of these products into the Community, and when necessary, find appropriate solutions to avoid trade distortion of the imports of these products into the Community. Without prejudice to paragraph 1, in the event that imports originating in Serbia of products listed in Annex V of Protocol 3 cumulatively increase by more than 30 percent in volume during a calendar year, compared to the average of the three previous calendar years, the Community may suspend the preferential treatment applicable to the products causing the increase. If a suspension of the preferential treatment is decided, the Community shall notify within five working days the measure to the Stabilisation and Association Committee and shall enter in consultations with Serbia to agree on measures designed to avoid trade distortion in trade of products listed in Annex V of Protocol 3. The Community shall restore the preferential treatment as soon as the trade distortion has been resolved by the effective implementation of the agreed measures or by the effect of any other appropriate measures adopted by the Parties The provisions of Article 41, paragraphs 3 to 6 shall apply mutatis mutandis to action under this paragraph. 3. The Parties shall review the functioning of the mechanism provided for in paragraph 2 no later than three years after the entry into force of this Agreement. The Stabilisation and Association Council may decide on appropriate adaptations to the mechanism provided for in paragraph 2.
Protection of geographical indications for agricultural and fishery products and foodstuffs other than wine and spirit drinks
1. Serbia shall provide protection for the geographical indications of the Community registered in the Community under Council Regulation (EC) No 510/2006 of 20 March 2006 on the protection of geographical indications and designations of origin for agricultural products and foodstuffs ( 5 ) , in accordance with the terms of this Article. Geographical indications of Serbia shall be eligible for registration in the Community under the conditions set out in that Regulation. 2. Serbia shall prohibit any use in its territory of the names protected in the Community for comparable products not complying with the geographical indication’s specification. This shall apply even where the true geographical origin of the good is indicated, the geographical indication in question is used in translation, the name is accompanied by terms such as ‘kind’, ‘type’, ‘style’, ‘imitation’, ‘method’ or other expressions of the sort. 3. Serbia shall refuse the registration of a trademark the use of which corresponds to the situations referred to in paragraph 2. 4. Trademarks the use of which corresponds to the situations referred to in paragraph 2, which have been registered in Serbia or established by use, shall no longer be used five years after the entry into force of this Agreement. However, this shall not apply to trademarks registered in Serbia and trademarks established by use which are owned by nationals of third countries, provided they are not of such a nature as to deceive in any way the public as to the quality, the specification and the geographical origin of the goods. 5. Any use of the geographical indications protected in accordance with paragraph 1 as terms customary in common language as the common name for such goods in Serbia shall cease at the latest five years after the entry into force of this Agreement. 6. Serbia shall ensure that goods exported from its territory five years after the entry into force of this Agreement do not infringe the provisions of this Article. 7. Serbia shall ensure the protection referred to in paragraph 1 to 6 on its own initiative as well as at the request of an interested party.
Scope
The provisions of this Chapter shall apply to trade in all products between the Parties except where otherwise provided herein or in Protocol 1.
Improved concessions
The provisions of this Title shall in no way affect the application, on a unilateral basis, of more favourable measures by any of the Parties.
Standstill
1. From the date of entry into force of this Agreement, no new customs duties on imports or exports or charges having equivalent effect shall be introduced, nor shall those already applied be increased, in trade between the Community and Serbia. 2. From the date of entry into force of this Agreement, no new quantitative restriction on imports or exports or measure having equivalent effect shall be introduced, nor shall those existing be made more restrictive, in trade between the Community and Serbia. 3. Without prejudice to the concessions granted under Articles 26, 27, 28, 29 and 30, the provisions of paragraphs 1 and 2 of this Article shall not restrict in any way the pursuit of the respective agricultural and fishery policies of Serbia and of the Community and the taking of any measures under those policies in so far as the import regime in Annexes II-V and Protocol 1 is not affected.
Prohibition of fiscal discrimination
1. The Community and Serbia shall refrain from, and abolish where existing, any measure or practice of an internal fiscal nature establishing, whether directly or indirectly, discrimination between the products of one Party and like products originating in the territory of the other Party. 2. Products exported to the territory of one of the Parties may not benefit from repayment of internal indirect taxation in excess of the amount of indirect taxation imposed on them.
Duties of a fiscal nature
The provisions concerning the abolition of customs duties on imports shall also apply to customs duties of a fiscal nature.
Customs unions, free trade areas, cross-border arrangements
1. This Agreement shall not preclude the maintenance or establishment of customs unions, free trade areas or arrangements for frontier trade except in so far as they alter the trade arrangements provided for in this Agreement. 2. During the transitional period specified in Article 18, this Agreement shall not affect the implementation of the specific preferential arrangements governing the movement of goods either laid down in frontier Agreements previously concluded between one or more Member States and Serbia or resulting from the bilateral Agreements specified in Title III concluded by Serbia in order to promote regional trade. 3. Consultations between the Parties shall take place within the Stabilisation and Association Council concerning the Agreements described in paragraphs 1 and 2 of this Article and, where requested, on other major issues related to their respective trade policies towards third countries. In particular in the event of a third country acceding to the Union, such consultations shall take place so as to ensure that account is taken of the mutual interests of the Community and Serbia stated in this Agreement.
Dumping and subsidy
1. None of the provisions in this Agreement shall prevent any of the Parties from taking trade defence action in accordance with paragraph 2 of this Article and Article 41. 2. If one of the Parties finds that dumping and/or countervailable subsidisation is taking place in trade with the other Party, that Party may take appropriate measures against this practice in accordance with the WTO Agreement on Implementation of Article VI of the GATT 1994 or the WTO Agreement on Subsidies and Countervailing Measures and the respective related internal legislation.
Safeguards clause
1. The provisions of Article XIX GATT 1994 and the WTO Agreement on Safeguards are applicable between the parties. 2. Notwithstanding paragraph 1 of this Article, where any product of one Party is being imported into the territory of the other Party in such increased quantities and under such conditions as to cause or threaten to cause: (a) serious injury to the domestic industry of like or directly competitive products in the territory of the importing Party or (b) serious disturbances in any sector of the economy or difficulties which could bring about serious deterioration in the economic situation of a region of the importing Party, the importing Party may take appropriate bilateral safeguard measures under the conditions and in accordance with the procedures laid down in this Article. 3. Bilateral safeguard measures directed at imports from the other Party shall not exceed what is necessary to remedy the problems, as defined in paragraph 2, which have arisen as a result of application of this Agreement. The safeguard measure adopted should consist of a suspension in the increase or in the reduction of the margins of preferences provided for under this Agreement for the product concerned up to a maximum limit corresponding to the basic duty referred to in Article 18 paragraph 4(a) and (b) and paragraph 5 for the same product. Such measures shall contain clear elements progressively leading to their elimination at the end of the set period, at the latest, and shall not be taken for a period exceeding two years. In very exceptional circumstances, measures may be extended for a further period of maximum two years. No bilateral safeguard measure shall be applied to the import of a product that has previously been subject to such a measure for a period of time equal to that during which such measure had been previously applied, provided that the period of non-application is at least two years since the expiry of the measure. 4. In the cases specified in this Article, before taking the measures provided for therein or, in the cases to which paragraph 5(b) of this Article applies, as soon as possible, the Community on the one part or Serbia on the other part, shall supply the Stabilisation and Association Council with all relevant information required for a thorough examination of the situation, with a view to seeking a solution acceptable to the Parties concerned. 5. For the implementation of the paragraphs 1, 2, 3 and 4 the following provisions shall apply: (a) the problems arising from the situation referred to in this Article shall be immediately referred for examination to the Stabilisation and Association Council, which may take any decisions needed to put an end to such problems. If the Stabilisation and Association Council or the exporting Party has not taken a decision putting an end to the problems, or no other satisfactory solution has been reached within 30 days of the matter being referred to the Stabilisation and Association Council, the importing Party may adopt the appropriate measures to remedy the problem in accordance with this Article. In the selection of safeguard measures, priority must be given to those which least disturb the functioning of the arrangements established in this Agreement. Safeguard measures applied in accordance with Article XIX GATT 1994 and the WTO Agreement on Safeguards shall preserve the level/margin of preference granted under this Agreement. (b) Where exceptional and critical circumstances requiring immediate action make prior information or examination, as the case may be, impossible, the Party concerned may, in the situations specified in this Article, apply forthwith provisional measures necessary to deal with the situation and shall inform the other Party immediately thereof. The safeguard measures shall be notified immediately to the Stabilisation and Association Council and shall be the subject of periodic consultations within that body, particularly with a view to establishing a timetable for their abolition as soon as circumstances permit. 6. In the event of the Community of the one part or Serbia of the other part subjecting imports of products liable to give rise to the problems referred to in this Article to an administrative procedure having as its purpose the rapid provision of information on the trend of trade flows, it shall inform the other Party.
Shortage clause
1. Where compliance with the provisions of this Title leads to: (a) a critical shortage, or threat thereof, of foodstuffs or other products essential to the exporting Party; or (b) re-export to a third country of a product against which the exporting Party maintains quantitative export restrictions, export duties or measures or charges having equivalent effect, and where the situations referred to above give rise, or are likely to give rise to major difficulties for the exporting Party that Party may take appropriate measures under the conditions and in accordance with the procedures laid down in this Article. 2. In the selection of measures, priority must be given to those which least disturb the functioning of the arrangements in this Agreement. Such measures shall not be applied in a manner which would constitute a means of arbitrary or unjustifiable discrimination where the same conditions prevail, or a disguised restriction on trade and shall be eliminated when the conditions no longer justify their maintenance. 3. Before taking the measures provided for in paragraph 1 or, as soon as possible in cases to which paragraph 4 applies, the Community or Serbia, shall supply the Stabilisation and Association Council with all relevant information, with a view to seeking a solution acceptable to the Parties. The Parties within the Stabilisation and Association Council may agree on any means needed to put an end to the difficulties. If no agreement is reached within 30 days of the matter being referred to the Stabilisation and Association Council, the exporting Party may apply measures under this Article on the exportation of the product concerned. 4. Where exceptional and critical circumstances requiring immediate action make prior information or examination, as the case may be, impossible, the Community or Serbia may apply forthwith the precautionary measures necessary to deal with the situation and shall inform the other Party immediately thereof. 5. Any measures applied pursuant to this Article shall be immediately notified to the Stabilisation and Association Council and shall be the subject of periodic consultations within that body, particularly with a view to establishing a timetable for their elimination as soon as circumstances permit.
State monopolies
Serbia shall progressively adjust any state monopolies of a commercial character so as to ensure that, three years after the entry into force of this Agreement, no discrimination regarding the conditions under which goods are procured and marketed exists between nationals of the Member States of the European Union and Serbia.
Rules of origin
Except if otherwise stipulated in this Agreement, Protocol 3 lays down the rules of origin for the application of the provisions of this Agreement.
Restrictions authorised
This Agreement shall not preclude prohibitions or restrictions on imports, exports or goods in transit justified on grounds of public morality, public policy or public security; the protection of health and life of humans, animals or plants; the protection of national treasures of artistic, historic or archaeological value or the protection of intellectual, industrial and commercial property, or rules relating to gold and silver. Such prohibitions or restrictions shall not, however, constitute a means of arbitrary discrimination or a disguised restriction on trade between the Parties.
Failure to provide administrative cooperation
1. The Parties agree that administrative cooperation is essential for the implementation and the control of the preferential treatment granted under this Title and underline their commitment to combat irregularities and fraud in customs and related matters. 2. Where a Party has made a finding, on the basis of objective information, of a failure to provide administrative cooperation and/or of irregularities or fraud under this Title, the Party concerned may temporarily suspend the relevant preferential treatment of the product(s) concerned in accordance with this Article. 3. For the purpose of this Article a failure to provide administrative cooperation shall mean, inter alia: (a) a repeated failure to respect the obligations to verify the originating status of the product(s) concerned; (b) a repeated refusal or undue delay in carrying out and/or communicating the results of subsequent verification of the proof of origin; (c) a repeated refusal or undue delay in obtaining authorisation to conduct administrative cooperation missions to verify the authenticity of documents or accuracy of information relevant to the granting of the preferential treatment in question. For the purpose of this Article a finding of irregularities or fraud may be made, inter alia, where there is a rapid increase, without satisfactory explanation, in imports of goods exceeding the usual level of production and export capacity of the other Party, which is linked to objective information concerning irregularities or fraud. 4. The application of a temporary suspension shall be subject to the following conditions: (a) the Party which has made a finding, on the basis of objective information, of a failure to provide administrative cooperation and/or of irregularities or fraud shall without undue delay notify the Stabilisation and Association Committee of its finding together with the objective information and enter into consultations within the Stabilisation and Association Committee, on the basis of all relevant information and objective findings, with a view to reaching a solution acceptable to both Parties. (b) Where the Parties have entered into consultations within the Stabilisation and Association Committee as above and have failed to agree on an acceptable solution within three months following the notification, the Party concerned may temporarily suspend the relevant preferential treatment of the product(s) concerned. A temporary suspension shall be notified to the Stabilisation and Association Committee without undue delay. (c) Temporary suspensions under this Article shall be limited to the minimum necessary to protect the financial interests of the Party concerned. They shall not exceed a period of six months, which may be renewed. Temporary suspensions shall be notified immediately after their adoption to the Stabilisation and Association Committee. They shall be subject to periodic consultations within the Stabilisation and Association Committee in particular with a view to their termination as soon as the conditions for their application no longer prevail. 5. At the same time as the notification to the Stabilisation and Association Committee under paragraph 4(a) of this Article, the Party concerned should publish a notice to importers in its Official Journal. The notice to importers should indicate for the product concerned that there is a finding, on the basis of objective information, of a failure to provide administrative cooperation and/or of irregularities or fraud.
In case of error by the competent authorities in the proper management of the preferential system at export, and in particular in the application of the provisions of Protocol 3 to the present Agreement where this error leads to consequences in terms of import duties, the Contracting Party facing such consequences may request the Stabilisation and Association Council to examine the possibilities of adopting all appropriate measures with a view to resolving the situation.
The application of this Agreement shall be without prejudice to the application of the provisions of Community law to the Canary Islands.
1. Subject to the conditions and modalities applicable in each Member State: (a) treatment accorded to workers who are nationals of Serbia and who are legally employed in the territory of a Member State shall be free of any discrimination based on nationality, as regards working conditions, remuneration or dismissal, compared to nationals of that Member State; (b) the legally resident spouse and children of a worker legally employed in the territory of a Member State, with the exception of seasonal workers and of workers concerned by bilateral Agreements within the meaning of Article 50, unless otherwise provided by such Agreements, shall have access to the labour market of that Member State, during the period of that worker’s authorised stay of employment. 2. Serbia shall, subject to the conditions and modalities applicable in that Republic, accord the treatment referred to in paragraph 1 to workers who are nationals of a Member State and are legally employed in its territory as well as to their spouse and children who are legally resident in Serbia.
1. Taking into account the situation in the labour market in the Member States, and subject to their legislation and to compliance with the rules in force in the Member States in the area of mobility of workers: (a) the existing facilities of access to employment for Serbian workers accorded by Member States under bilateral Agreements should be preserved and if possible improved; (b) the other Member States shall examine the possibility of concluding similar Agreements. 2. After three years, the Stabilisation and Association Council shall examine the granting of other improvements, including facilities for access to professional training, in accordance with the rules and procedures in force in the Member States, and taking into account the situation in the labour market in the Member States and in the Community.
1. Rules shall be laid down for the coordination of social security systems for workers with Serbian nationality, legally employed in the territory of a Member State, and for the members of their families legally resident there. To that effect, a decision of the Stabilisation and Association Council, which should not affect any rights or obligations arising from bilateral Agreements where the latter provide for more favourable treatment, shall put the following provisions in place: (a) all periods of insurance, employment or residence completed by such workers in the various Member States shall be added together for the purpose of pensions and annuities in respect of old age, invalidity and death and for the purpose of medical care for such workers and such family members; (b) any pensions or annuities in respect of old age, death, industrial accident or occupational disease, or of invalidity resulting therefrom, with the exception of non-contributory benefits, shall be freely transferable at the rate applied by virtue of the law of the debtor Member State or States; (c) the workers in question shall receive family allowances for the members of their families as defined above. 2. Serbia shall accord to workers who are nationals of a Member State and legally employed in its territory, and to members of their families legally resident there, treatment similar to that specified in points (b) and (c) of paragraph 1.
Definition
For the purposes of this Agreement: (a) ‘Community company’ or ‘Serbian company’ shall mean, respectively, a company set up in accordance with the laws of a Member State, or of Serbia and having its registered office or central administration or principal place of business in the territory of the Community or of Serbia. However, should the company, set up in accordance with the laws of a Member State or of Serbia, have only its registered office in the territory of the Community or of Serbia respectively, the company shall be considered a Community or a Serbian company if its operations possess a real and continuous link with the economy of one of the Member States or of Serbia; (b) ‘Subsidiary’ of a company shall mean a company which is effectively controlled by another company; (c) ‘Branch’ of a company shall mean a place of business not having legal personality which has the appearance of permanency, such as the extension of a parent body, has a management and is materially equipped to negotiate business with third parties so that the latter, although knowing that there will if necessary be a legal link with the parent body, the head office of which is abroad, do not have to deal directly with such parent body but may transact business at the place of business constituting the extension; (d) ‘Establishment’ shall mean: (i) as regards nationals, the right to take up economic activities as self-employed persons, and to set up undertakings, in particular companies, which they effectively control. Self-employment and business undertakings by nationals shall not extend to seeking or taking employment in the labour market or confer a right of access to the labour market of another Party. The provisions of this Chapter do not apply to persons who are not exclusively self-employed; (ii) as regards Community or Serbian companies, the right to take up economic activities by means of the setting up of subsidiaries and branches in Serbia, or in the Community respectively; (e) ‘Operations’ shall mean the pursuit of economic activities; (f) ‘Economic activities’ shall in principle include activities of an industrial, commercial and professional character and activities of craftsmen; (g) ‘Community national’ and ‘national of Serbia’ shall mean respectively a natural person who is a national of a Member State or Serbia; With regard to international maritime transport, including inter-modal operations involving a sea leg, Community nationals or nationals of Serbia established outside the Community and Serbia, and shipping companies established outside the Community or Serbia and controlled by Community nationals or nationals of Serbia, shall also be beneficiaries of the provisions of this Chapter and Chapter III, if their vessels are registered in that Member State or in Serbia, in accordance with their respective legislation; (h) ‘Financial services’ shall mean those activities described in Annex VI. The Stabilisation and Association Council may extend or modify the scope of that Annex.
1. Serbia shall facilitate the setting-up of operations on its territory by Community companies and nationals. To that end, Serbia shall grant, upon entry into force of this Agreement: (a) as regards the establishment of Community companies on the territory of Serbia, treatment no less favourable than that accorded to its own companies or to any third country company, whichever is the better; (b) as regards the operation of subsidiaries and branches of Community companies on the territory of Serbia once established, treatment no less favourable than that accorded to its own companies and branches or to any subsidiary and branch of any third country company, whichever is the better. 2. The Community and its Member States shall grant, from the entry into force of this Agreement: (a) as regards the establishment of Serbian companies treatment no less favourable than that accorded by Member States to their own companies or to any company of any third country, whichever is the better; (b) as regards the operation of subsidiaries and branches of Serbian companies, established in its territory, treatment no less favourable than that accorded by Member States to their own companies and branches, or to any subsidiary and branch of any third country company, established in their territory, whichever is the better. 3. The Parties shall not adopt any new regulations or measures which introduce discrimination as regards the establishment of any other Party’s companies on their territory or in respect of their operation, once established, by comparison with their own companies. 4. Four years after the entry into force of this Agreement, the Stabilisation and Association Council shall establish the detailed arrangements to extend the above provisions to the establishment of Community nationals and nationals of Serbia to take up economic activities as self-employed persons. 5. Notwithstanding the provisions of this Article: (a) Subsidiaries and branches of Community companies shall have, from the entry into force of this Agreement, the right to use and rent real property in Serbia; (b) Subsidiaries of Community companies shall, from the entry into force of this Agreement, have the right to acquire and enjoy ownership rights over real property as Serbian companies and as regards public goods/goods of common interest, the same rights as enjoyed by Serbian companies respectively where these rights are necessary for the conduct of the economic activities for which they are established. (c) Four years after the entry into force of this Agreement, the Stabilisation and Association Council shall examine the possibility of extending the rights mentioned under point (b) to branches of the Community companies.
1. Subject to the provisions of Article 56, with the exception of financial services described in Annex VI, the Parties may regulate the establishment and operation of companies and nationals on their territory, insofar as these regulations do not discriminate against companies and nationals of the other Parties in comparison with its own companies and nationals. 2. In respect of financial services, notwithstanding any other provisions of this Agreement, a Party shall not be prevented from taking measures for prudential reasons, including for the protection of investors, depositors, policy holders or persons to whom a fiduciary duty is owed by a financial service supplier, or to ensure the integrity and stability of the financial system. Such measures shall not be used as a means of avoiding the Party’s obligations under this Agreement. 3. Nothing in this Agreement shall be construed to require a Party to disclose information relating to the affairs and accounts of individual customers or any confidential or proprietary information in the possession of public entities.
1. Without prejudice to any provision to the contrary contained in the Multilateral Agreement on the Establishment of a European Common Aviation Area ( 6 ) (hereinafter referred to as ‘ECAA’), the provisions of this Chapter shall not apply to air transport services, inland waterways transport services and maritime cabotage services. 2. The Stabilisation and Association Council may make recommendations for improving establishment and operations in the areas covered by paragraph 1.
1. The provisions of Articles 53 and 54 do not preclude the application by a Party of particular rules concerning the establishment and operation in its territory of branches of companies of another Party not incorporated in the territory of the first Party, which are justified by legal or technical differences between such branches as compared to branches of companies incorporated in its territory or, as regards financial services, for prudential reasons. 2. The difference in treatment shall not go beyond what is strictly necessary as a result of such legal or technical differences or, as regards financial services, for prudential reasons.
In order to make it easier for Community nationals and nationals from Serbia to take up and pursue regulated professional activities in Serbia and in the Community respectively, the Stabilisation and Association Council shall examine which steps are necessary for the mutual recognition of qualifications. It may take all necessary measures to that end.
1. A Community company established in the territory of Serbia or a Serbian company established in the Community shall be entitled to employ, or have employed by one of its subsidiaries or branches, in accordance with the legislation in force in the host territory of establishment, in the territory of the Republic of Serbia and the Community respectively, employees who are nationals of the Member States or nationals from Serbia respectively, provided that such employees are key personnel as defined in paragraph 2 and that they are employed exclusively by companies, subsidiaries or branches. The residence and work permits of such employees shall cover only the period of such employment. 2. Key personnel of the abovementioned companies herein referred to as ‘organisations’ are ‘intra-corporate transferees’ as defined in point (c) of this paragraph in the following categories, provided that the organisation is a legal person and that the persons concerned have been employed by it or have been partners in it (other than as majority shareholders), for at least one year immediately preceding such movement: (a) Persons working in a senior position with an organisation, who primarily direct the management of the establishment, receiving general supervision or direction principally from the board of directors or stockholders of the business or their equivalent including: (i) directing the establishment of a department or sub-division of the establishment; (ii) supervising and controlling the work of other supervisory, professional or managerial employees; (iii) having the authority personally to recruit and dismiss or recommend recruiting, dismissing or other personnel actions; (b) Persons working within an organisation who possess uncommon knowledge essential to the establishment’s service, research equipment, techniques or management. The assessment of such knowledge may reflect, apart from knowledge specific to the establishment, a high level of qualification referring to a type of work or trade requiring specific technical knowledge, including membership of an accredited profession; (c) An ‘intra-corporate transferee’ is defined as a natural person working within an organisation in the territory of a Party, and being temporarily transferred in the context of pursuit of economic activities in the territory of the other Party; the organisation concerned must have its principal place of business in the territory of a Party and the transfer be to an establishment (branch, subsidiary) of that organisation, effectively pursuing like economic activities in the territory of the other Party. 3. The entry into and the temporary presence within the territory of the Community or in Serbia of Serbian nationals and Community nationals respectively shall be permitted, when these representatives of companies are persons working in a senior position, as defined in paragraph 2(a) above, within a company, and are responsible for the setting up of a Community subsidiary or branch of a Serbian company or of a Serbian subsidiary or branch of a Community company in a Member State or in the Republic of Serbia respectively, when: (a) those representatives are not engaged in making direct sales or supplying services, and do not receive remuneration from a source located within the host territory of establishment, and; (b) the company has its principal place of business outside the Community or Serbia, respectively, and has no other representative, office, branch or subsidiary in that Member State or in Serbia respectively.
1. The Community and Serbia undertake, in accordance with the following provisions, to take the necessary steps to allow progressively the supply of services by Community companies, Serbian companies or by Community nationals or nationals of Serbia which are established in the territory of a Party other than that of the person for whom the services are intended. 2. In step with the liberalisation process mentioned in paragraph 1, the Parties shall permit the temporary movement of natural persons providing the service or who are employed by the service provider as key personnel as defined in Article 58, including natural persons who are representatives of a Community or Serbian company or national and are seeking temporary entry for the purpose of negotiating for the sale of services or entering into agreements to sell services for that service provider, where those representatives will not be engaged in making direct sales to the general public or in supplying services themselves. 3. After four years, the Stabilisation and Association Council shall take the measures necessary to progressively implement the provisions of paragraph 1. Account shall be taken of the progress achieved by the Parties in the approximation of their laws.
1. The Parties shall not take any measures or actions which render the conditions for the supply of services by Community and Serbia nationals or companies which are established in a Party other than that of the person for whom the services are intended significantly more restrictive as compared to the situation existing on the day preceding the day of entry into force of this Agreement. 2. If one Party is of the view that measures introduced by the other Party since the entry into force of this Agreement result in a situation which is significantly more restrictive in respect of supply of services as compared with the situation existing at the date of entry into force of this Agreement, such first Party may request the other Party to enter into consultations.
With regard to supply of transport services between the Community and Serbia, the following provisions shall apply: 1. With regard to land transport, Protocol 4 lays down the rules applicable to the relationship between the Parties in order to ensure, particularly, unrestricted road transit traffic across Serbia and the Community as a whole, the effective application of the principle of non discrimination and progressive harmonisation of the transport legislation of Serbia with that of the Community. 2. With regard to international maritime transport, the Parties undertake to apply effectively the principle of unrestricted access to the international maritime markets and trades on a commercial basis, and to respect international and European obligations in the field of safety, security and environmental standards. The Parties affirm their commitment to a freely competitive environment as an essential feature of international maritime transport. 3. In applying the principles of paragraph 2, the Parties shall: (a) not introduce cargo-sharing clauses in future bilateral Agreements with third countries; (b) abolish, upon the entry into force of this Agreement, all unilateral measures and administrative, technical and other obstacles that could have restrictive or discriminatory effects on the free supply of services in international maritime transport; (c) Each Party shall grant, inter alia, no less favourable treatment for the ships operated by nationals or companies of the other Party than that accorded to a Party’s own ships with regard to access to ports open to international trade, the use of infrastructure and auxiliary maritime services of the ports, as well as related fees and charges, customs facilities and the assignment of berths and facilities for loading and unloading. 4. With a view to ensuring a coordinated development and progressive liberalisation of transport between the Parties adapted to their reciprocal commercial needs, the conditions of mutual market access in air transport shall be dealt with by the ECAA. 5. Prior to the conclusion of the ECAA, the Parties shall not take any measures or actions which are more restrictive or discriminatory as compared with the situation existing prior to the entry into force of this Agreement. 6. Serbia shall adapt its legislation, including administrative, technical and other rules, to that of the Community existing at any time in the field of air, maritime, inland waterway and land transport insofar as it serves liberalisation purposes and mutual access to markets of the Parties and facilitates the movement of passengers and of goods. 7. In step with the common progress in the achievement of the objectives of this Chapter, the Stabilisation and Association Council shall examine ways of creating the conditions necessary for improving freedom to provide air, land and inland waterway transport services.
The Parties undertake to authorise, in freely convertible currency, in accordance with the provisions of Article VIII of the Articles of the Agreement of the International Monetary Fund, any payments and transfers on the current account of balance of payments between the Community and Serbia.
1. With regard to transactions on the capital and financial account of balance of payments, from the entry into force of this Agreement, the Parties shall ensure the free movement of capital relating to direct investments made in companies formed in accordance with the laws of the host country and investments made in accordance with the provisions of Chapter II of Title V, and the liquidation or repatriation of these investments and of any profit stemming there from. 2. With regard to transactions on the capital and financial account of balance of payments, from the entry into force of this Agreement, the Parties shall ensure the free movement of capital relating to credits related to commercial transactions or to the provision of services in which a resident of one of the Parties is participating, and to financial loans and credits, with maturity longer than a year. 3. As from the entry into force of this Agreement, Serbia shall authorise, by making full and expedient use of its existing procedures, the acquisition of real estate in Serbia by nationals of Member States of the European Union. Within four years from the entry into force of this Agreement, Serbia shall progressively adjust its legislation concerning the acquisition of real estate in its territory by nationals of the Member States of the European Union to ensure the same treatment as compared to its own nationals. 4. The Community and Serbia shall also ensure, as from four years after the entry into force of this Agreement, free movement of capital relating to portfolio investment and financial loans and credits with maturity shorter than a year. 5. Without prejudice to paragraph 1, the Parties shall not introduce any new restrictions on the movement of capital and current payments between residents of the Community and Serbia and shall not make the existing arrangements more restrictive. 6. Without prejudice to the provisions of Article 62 and of this Article, where, in exceptional circumstances, movements of capital between the Community and Serbia cause, or threaten to cause, serious difficulties for the operation of exchange rate policy or monetary policy in the Community or Serbia, the Community and Serbia, respectively, may take safeguard measures with regard to movements of capital between the Community and Serbia for a period not exceeding six months if such measures are strictly necessary. 7. Nothing in the above provisions shall be taken to limit the rights of economic operators of the Parties from benefiting from any more favourable treatment that may be provided for in any existing bilateral or multilateral Agreement involving Parties to this Agreement. 8. The Parties shall consult each other with a view to facilitating the movement of capital between the Community and Serbia in order to promote the objectives of this Agreement.
1. During the first four years following the date of entry into force of this Agreement, the Community and Serbia shall take measures permitting the creation of the necessary conditions for the further gradual application of Community rules on the free movement of capital. 2. By the end of the fourth year following the date of entry into force of this Agreement, the Stabilisation and Association Council shall determine the detailed arrangements for full application of Community rules on the movement of capital in Serbia.
1. The provisions of this Title shall be applied subject to limitations justified on grounds of public policy, public security or public health. 2. They shall not apply to activities that in the territory of any of the Parties are connected, even occasionally, with the exercise of official authority.
For the purpose of this Title, nothing in this Agreement shall prevent the Parties from applying their laws and regulations regarding entry and stay, employment, working conditions, establishment of natural persons and supply of services, notably insofar as the granting, renewal or refusal of a residence permit is concerned, provided that, in so doing, they do not apply them in such a manner as to nullify or impair the benefits accruing to any Party under the terms of a specific provision of this Agreement. This provision shall be without prejudice to the application of Article 65.
Companies which are controlled and exclusively owned jointly by Serbian companies, or nationals of Serbia and Community companies or nationals shall also be covered by the provisions of this Title.
1. The Most-Favoured-Nation treatment granted in accordance with the provisions of this Title shall not apply to the tax advantages that the Parties are providing or will provide in the future on the basis of Agreements designed to avoid double taxation or other tax arrangements. 2. None of the provisions of this Title shall be construed to prevent the adoption or enforcement by the Parties of any measure aimed at preventing the avoidance or evasion of taxes pursuant to the tax provisions of Agreements to avoid double taxation and other tax arrangements or domestic fiscal legislation. 3. None of the provisions of this Title shall be construed to prevent Member States or Serbia from applying the relevant provisions of their fiscal legislation, from distinguishing between taxpayers who are not in identical situations, in particular as regards their place of residence.
1. The Parties shall endeavour wherever possible to avoid the imposition of restrictive measures, including measures relating to imports, for balance of payments purposes. A Party adopting such measures shall present as soon as possible to the other Party a timetable for their removal. 2. Where one or more Member States or Serbia is in serious balance of payments difficulties, or under imminent threat thereof, the Community and Serbia may, in accordance with the conditions established under the WTO Agreement, adopt restrictive measures, including measures relating to imports, which shall be of limited duration and may not go beyond what is strictly necessary to remedy the balance of payments situation. The Community and Serbia shall inform the other Party forthwith. 3. Any restrictive measures shall not apply to transfers related to investment and in particular to the repatriation of amounts invested or reinvested or any kind of revenues stemming therefrom.
The provisions of this Title shall be progressively adjusted, notably in the light of requirements arising from Article V of the GATS.
The provisions of this Agreement shall not prejudice the application by any Party of any measure necessary to prevent the circumvention of its measures concerning third-country access to its market through the provisions of this Agreement.
1. The Parties recognise the importance of the approximation of the existing legislation in Serbia to that of the Community and of its effective implementation. Serbia shall endeavour to ensure that its existing laws and future legislation will be gradually made compatible with the Community acquis . Serbia shall ensure that existing and future legislation will be properly implemented and enforced. 2. This approximation shall start on the date of signing of this Agreement, and shall gradually extend to all the elements of the Community acquis referred to in this Agreement by the end of the transitional period defined in Article 8 of this Agreement. 3. Approximation will, at an early stage, focus on fundamental elements of the Internal Market acquis , Justice, Freedom and Security as well as on other trade-related areas. At a further stage, Serbia shall focus on the remaining parts of the acquis . Approximation shall be carried out on the basis of a programme to be agreed between the European Commission and Serbia. 4. Serbia shall also define, in agreement with the European Commission, the detailed arrangements for the monitoring of the implementation of approximation of legislation and law enforcement actions to be taken.
Competition and other economic provisions
1. The following are incompatible with the proper functioning of this Agreement, insofar as they may affect trade between the Community and Serbia: (i) all Agreements between undertakings, decisions by associations of undertakings and concerted practices between undertakings which have as their object or effect the prevention, restriction or distortion of competition; (ii) abuse by one or more undertakings of a dominant position in the territories of the Community or Serbia as a whole or in a substantial part thereof; (iii) any State aid which distorts or threatens to distort competition by favouring certain undertakings or certain products. 2. Any practices contrary to this Article shall be assessed on the basis of criteria arising from the application of the competition rules applicable in the Community, in particular from Articles 81, 82, 86 and 87 of the EC Treaty and interpretative instruments adopted by the Community institutions. 3. The Parties shall ensure that an operationally independent authority is entrusted with the powers necessary for the full application of paragraph 1(i) and (ii) of this Article, regarding private and public undertakings and undertakings to which special rights have been granted. 4. Serbia shall establish an operationally independent authority which is entrusted with the powers necessary for the full application of paragraph 1(iii) within one year from the date of entry into force of this Agreement. This authority shall have, inter alia, the powers to authorise State aid schemes and individual aid grants in conformity with paragraph 2, as well as the powers to order the recovery of State aid that has been unlawfully granted. 5. The Community on one side and Serbia on the other side shall ensure transparency in the area of State aid, inter alia, by providing to the other Parties a regular annual report, or equivalent, following the methodology and the presentation of the Community survey on State aid. Upon request by one Party, the other Party shall provide information on particular individual cases of public aid. 6. Serbia shall establish a comprehensive inventory of aid schemes instituted before the establishment of the authority referred to in paragraph 4 and shall align such aid schemes with the criteria referred to in paragraph 2 within a period of no more than 4 years from the entry into force of this Agreement. 7. (a) For the purposes of applying the provisions of paragraph 1(iii), the Parties recognise that during the first five years after the entry into force of this Agreement, any public aid granted by Serbia shall be assessed taking into account the fact that Serbia shall be regarded as an area identical to those areas of the Community described in Article 87(3)(a) of the EC Treaty. (b) Within four years from the entry into force of this Agreement, Serbia shall submit to the European Commission its GDP per capita figures harmonised at NUTS II level. The authority referred to in paragraph 4 and the European Commission shall then jointly evaluate the eligibility of the regions of Serbia as well as the maximum aid intensities in relation thereto in order to draw up the regional aid map on the basis of the relevant Community guidelines. 8. As appropriate, Protocol 5 establishes the rules on state aid in the steel industry. This Protocol establishes the rules applicable in the event restructuring aid is granted to the steel industry. It would stress the exceptional character of such aid and the fact that the aid would be limited in time and would be linked to capacity reductions within the framework of feasibility programmes. 9. With regard to products referred to in Chapter II of Title IV: (a) paragraph 1(iii) shall not apply; (b) any practices contrary to paragraph 1(i) shall be assessed according to the criteria established by the Community on the basis of Articles 36 and 37 of the EC Treaty and specific Community instruments adopted on this basis. 10. If one of the Parties considers that a particular practice is incompatible with the terms of paragraph 1, it may take appropriate measures after consultation within the Stabilisation and Association Council or after 30 working days following referral for such consultation. Nothing in this Article shall prejudice or affect in any way the taking, by the Community or Serbia, of countervailing measures in accordance with the GATT 1994 and the WTO Agreement on Subsidies and Countervailing Measures and the respective related internal legislation.
Public undertakings
By the end of the third year following the entry into force of this Agreement, Serbia shall apply to public undertakings and undertakings to which special and exclusive rights have been granted the principles set out in the EC Treaty, with particular reference to Article 86. Special rights of public undertakings during the transitional period shall not include the possibility to impose quantitative restrictions or measures having an equivalent effect on imports from the Community into Serbia.
Intellectual, industrial and commercial property
1. Pursuant to the provisions of this Article and Annex VII, the Parties confirm the importance that they attach to ensuring adequate and effective protection and enforcement of intellectual, industrial and commercial property rights. 2. From the entry into force of this Agreement, the Parties shall grant to each others companies and nationals, in respect of the recognition and protection of intellectual, industrial and commercial property, treatment no less favourable than that granted by them to any third country under bilateral Agreements. 3. Serbia shall take the necessary measures in order to guarantee no later than five years after entry into force of this Agreement a level of protection of intellectual, industrial and commercial property rights similar to that existing in the Community, including effective means of enforcing such rights. 4. Serbia undertakes to accede, within the period referred to above, to the multilateral conventions on intellectual, industrial and commercial property rights referred to in Annex VII. The Stabilisation and Association Council may decide to oblige Serbia to accede to specific multilateral Conventions in this area. 5. If problems in the area of intellectual, industrial and commercial property affecting trading conditions occur, they shall be referred urgently to the Stabilisation and Association Council, at the request of either Party, with a view to reaching mutually satisfactory solutions.
Public procurement
1. The Community and Serbia consider the opening-up of the award of public contracts on the basis of non-discrimination and reciprocity, following in particular the WTO rules, to be a desirable objective. 2. Serbian companies, whether established in the Community or not, shall be granted access to contract award procedures in the Community pursuant to Community procurement rules under treatment no less favourable than that accorded to Community companies as from the entry into force of this Agreement. The above provisions shall also apply to contracts in the utilities sector once the government of Serbia has adopted the legislation introducing the Community rules in this area. The Community shall examine periodically whether Serbia has indeed introduced such legislation. 3. Community companies established in Serbia under the provisions of Chapter II of Title V shall, from the entry into force of this Agreement, be granted access to contract award procedures in Serbia under treatment no less favourable than that accorded to Serbian companies. 4. Community companies not established in Serbia shall be granted access to contract award procedures in Serbia pursuant to the Serbian Law on Public Procurement under treatment no less favourable than that accorded to Serbian companies at the latest five years after the entry into force of this Agreement. Upon the entry into force of this Agreement, Serbia shall convert any existing preference for domestic economic entities to a price preference and, within a period of five years, shall gradually reduce the latter in accordance with the following timetable: — the preferences shall not exceed 15 % by the end of the second year following the entry into force of this Agreement; — the preferences shall not exceed 10 % by the end of the third year following the entry into force of this Agreement; — the preferences shall not exceed 5 % by the end of the fourth year following the entry into force of this Agreement; and — the preferences will be completely abolished no later than the end of the fifth year following the entry into force of this Agreement. 5. The Stabilisation and Association Council shall periodically examine the possibility for Serbia to introduce access to contract award procedures in Serbia for all Community companies. Serbia shall report annually to the Stabilisation and Association Council on the measures they have taken to enhance transparency and to provide for effective judicial review of decisions taken in the area of public procurement. 6. As regards establishment, operations, supply of services between the Community and Serbia, and also employment and movement of labour linked to the fulfilment of public contracts, the provisions of Articles 49 to 64 are applicable.
Standardisation, metrology, accreditation and conformity assessment
1. Serbia shall take the necessary measures in order to gradually achieve conformity with Community technical regulations and European standardisation, metrology, accreditation and conformity assessment procedures. 2. To this end, the Parties shall seek to: (a) promote the use of Community technical regulations, European standards and conformity assessment procedures; (b) provide assistance to fostering the development of quality infrastructure: standardisation, metrology, accreditation and conformity assessment; (c) promote the participation of Serbia in the work of organisations related to standards, conformity assessment, metrology and similar functions (e.g. CEN, Cenelec, ETSI, EA, WELMEC, EUROMET) ( 7 ) . (d) where appropriate, conclude an Agreement on Conformity Assessment and Acceptance of Industrial Products once the legislative framework and the procedures of Serbia is sufficiently aligned on that of the Community and appropriate expertise is available.
Consumer protection
The Parties shall cooperate in order to align the standards of consumer protection in Serbia to those of the Community. Effective consumer protection is necessary in order to ensure the proper functioning of the market economy, and this protection will depend on the development of an administrative infrastructure in order to ensure market surveillance and law enforcement in this field. To that end, and in view of their common interests, the Parties shall ensure: (a) a policy of active consumer protection, in accordance with Community law, including the increase of information and development of independent organisations; (b) the harmonisation of legislation of consumer protection in Serbia on that in force in the Community; (c) effective legal protection for consumers in order to improve the quality of consumer goods and maintain appropriate safety standards; (d) monitoring of rules by competent authorities and providing access to justice in case of disputes; (e) exchange information on dangerous products.
Working conditions and equal opportunities
Serbia shall progressively harmonise its legislation to that of the Community in the fields of working conditions, notably on health and safety at work, and equal opportunities.
Reinforcement of institutions and rule of law
In their cooperation on justice, freedom and security, the Parties shall attach particular importance to the consolidation of the rule of law, and the reinforcement of institutions at all levels in the areas of administration in general and law enforcement and the administration of justice in particular. Cooperation shall notably aim at strengthening the independence of the judiciary and improving its efficiency, improving the functioning of the police and other law enforcement bodies, providing adequate training and fighting corruption and organised crime.
Protection of personal data
Serbia shall harmonise its legislation concerning personal data protection with Community law and other European and international legislation on privacy upon the entry into force of this Agreement. Serbia shall establish one or more independent supervisory bodies with sufficient financial and human resources in order to efficiently monitor and guarantee the enforcement of national personal data protection legislation. The Parties shall cooperate to achieve this goal.
Visa, border management, asylum and migration
The Parties shall cooperate in the areas of visa, border control, asylum and migration and shall set up a framework for the cooperation, including at a regional level, in these fields, taking into account and making full use of other existing initiatives in this area as appropriate. Cooperation in the matters above shall be based on mutual consultations and close coordination between the Parties and should include technical and administrative assistance for: (a) the exchange of statistics and information on legislation and practices; (b) the drafting of legislation; (c) enhancing the capacity and efficiency of the institutions; (d) the training of staff; (e) the security of travel documents and detection of false documents; (f) border management. Cooperation shall focus in particular: (a) on the area of asylum on the implementation of national legislation to meet the standards of the Convention relating to the Status of Refugees done at Geneva on 28 July 1951 and the Protocol relating to the Status of Refugees done at New York on 31 January 1967 thereby to ensure that the principle of ‘non-refoulement’ is respected as well as other rights of asylum seekers and refugees; (b) on the field of legal migration, on admission rules and rights and status of the person admitted. In relation to migration, the Parties agree to the fair treatment of nationals of other countries who reside legally on their territories and to promote an integration policy aiming at making their rights and obligations comparable to those of their citizens.
Prevention and control of illegal immigration; readmission
1. The Parties shall cooperate in order to prevent and control illegal immigration. To this end, Serbia and the Member States shall readmit any of their nationals illegally present on their territories and agree to fully implement the Agreement on readmission between the Community and Serbia and bilateral Agreements between Member States and Serbia in so far as the provisions of these bilateral Agreements are compatible with those of the Agreement on readmission between the Community and Serbia, including an obligation for the readmission of nationals of other countries and stateless persons. The Member States and Serbia shall provide their nationals with appropriate identity documents and shall extend to them the administrative facilities necessary for such purposes. Specific procedures for the purpose of readmission of nationals, third country nationals and stateless persons are laid down in the Agreement on readmission between the Community and Serbia and bilateral Agreements between Member States and Serbia in so far as the provisions of these bilateral Agreements are compatible with those of the Agreement on readmission between the Community and Serbia. 2. Serbia agrees to conclude readmission Agreements with the Stabilisation and Association process countries and undertakes to take any necessary measures to ensure the flexible and rapid implementation of all readmission Agreements referred to in this Article. 3. The Stabilisation and Association Council shall establish other joint efforts that can be made to prevent and control illegal immigration, including trafficking and illegal migration networks.
Money laundering and financing of terrorism
1. The Parties shall cooperate in order to prevent the use of their financial systems and relevant non-financial sectors for laundering of proceeds from criminal activities in general and drug offences in particular, as well as for the purpose of financing terrorism. 2. Cooperation in this area may include administrative and technical assistance with the purpose of developing the implementation of regulations and efficient functioning of the suitable standards and mechanisms to combat money laundering and financing of terrorism equivalent to those adopted by the Community and international fora in this field, in particular the Financial Action Task Force (FATF).
Cooperation on illicit drugs
1. Within their respective powers and competencies, the Parties shall cooperate to ensure a balanced and integrated approach towards drug issues. Drug policies and actions shall be aimed at reinforcing structures for combating illicit drugs, reducing the supply of, trafficking in and the demand for illicit drugs, coping with the health and social consequences of drug abuse as well as at a more effective control of precursors. 2. The Parties shall agree on the necessary methods of cooperation to attain these objectives. Actions shall be based on commonly agreed principles along the lines of the EU Drug Strategy.
Preventing and combating organised crime and other illegal activities
The Parties shall cooperate on combating and preventing criminal and illegal activities, organised or otherwise, such as: (a) smuggling and trafficking in human beings; (b) illegal economic activities, and in particular counterfeiting of cash and non-cash means of payments, illegal transactions on products such as industrial waste, radioactive material and transactions involving illegal, counterfeit or pirated products; (c) corruption, both in the private and public sector, in particular linked to non-transparent administrative practices; (d) fiscal fraud; (e) identity theft; (f) illicit trafficking in drugs and psychotropic substances; (g) illicit arms trafficking; (h) forging documents; (i) smuggling and illicit trafficking of goods, including cars; (j) cyber crime. Regional cooperation and compliance with recognised international standards in combating organised crime shall be promoted.
Combating terrorism
In compliance with the international conventions to which they are Party and their respective laws and regulations, the Parties agree to cooperate in order to prevent and suppress acts of terrorism and their financing: (a) in the framework of full implementation of United Nations Security Council Resolution 1373 (2001) and other relevant UN resolutions, international conventions and instruments; (b) by exchanging information on terrorist groups and their support networks in accordance with international and national law; (c) by exchanging experiences with regard to means and methods of combating terrorism and in technical areas and training, and by exchanging experience in respect of the prevention of terrorism.
1. The Community and Serbia shall establish a close cooperation aimed at contributing to the development and growth potential of Serbia. Such cooperation shall strengthen existing economic links on the widest possible foundation, to the benefit of both Parties. 2. Policies and other measures shall be designed to bring about sustainable economic and social development of Serbia. These policies should ensure that environmental considerations are also fully incorporated from the outset and that they are linked to the requirements of harmonious social development. 3. Cooperation policies shall be integrated into a regional framework of cooperation. Special attention will have to be devoted to measures that can foster cooperation between Serbia and its neighbouring countries including Member States, thus contributing to regional stability. The Stabilisation and Association Council shall define priorities between and within the cooperation policies described hereinafter in line with the European Partnership.
Economic and trade policy
The Community and Serbia shall facilitate the process of economic reform by cooperating to improve understanding of the fundamentals of their respective economies and the formulation and implementation of economic policy in market economies. To these ends, the Community and Serbia shall cooperate to: (a) exchange information on macroeconomic performance and prospects and on strategies for development; (b) analyse jointly economic issues of mutual interest, including the framing of economic policy and the instruments for implementing it; and (c) promote wider cooperation with the aim to speed up the inflow of know-how and access to new technologies. Serbia shall strive to establish a functioning market economy and to gradually approximate its policies to the stability-oriented policies of the European Economic and Monetary Union. At the request of the authorities of Serbia, the Community may provide assistance designed to support the efforts of Serbia in this respect. Cooperation shall also aim at strengthening the rule of law in the business area through a stable and non-discriminatory trade-related legal framework. Cooperation in this area shall include exchange of information concerning the principles and functioning of the European Economic and Monetary Union.
Statistical cooperation
Cooperation between the Parties shall primarily focus on priority areas related to the Community acquis in the field of statistics. It shall notably be aimed at developing efficient and sustainable statistical systems capable of providing, reliable, objective and accurate data needed to plan and monitor the process of transition and reform in Serbia. It should also enable the Statistical Office in Serbia to better meet the needs of its customers in the country (both public administration and private sector). The statistical system should respect the fundamental principles of statistics issued by the UN, the European Statistical Code of Practice and the stipulations of the European Statistical law and develop towards the Community acquis . The Parties shall cooperate in particular to ensure the confidentiality of individual data, to progressively increase data collection and transmission to the European Statistical System and, to exchange of information on methods, transfer of know-how and training.
Banking, insurance and other financial services
Cooperation between Serbia and the Community shall focus on priority areas related to the Community acquis in the fields of banking, insurance and financial services. The Parties shall cooperate with the aim of establishing and developing a suitable framework for the encouragement of the banking, insurance and financial services sectors in Serbia based on fair competition practices and ensuring the necessary level playing field.
Internal control and external audit cooperation
Cooperation between the Parties shall focus on priority areas related to the Community acquis in the fields of public internal financial control (PIFC) and external audit. The Parties shall, in particular, cooperate — through elaborating and adopting relevant regulation — with the aim of developing transparent, efficient and economic PIFC (including financial management and control and functionally independent internal audit) and independent external audit systems in Serbia, in accordance with internationally accepted standards and methodologies and EU best practices. Cooperation shall also focus on capacity building of the Supreme Audit Institution in Serbia. In order to be able to fulfil the coordination and harmonisation responsibilities stemming from the requirements above, cooperation should also focus on the establishment and strengthening of central harmonisation units for financial management and control and for Internal Audit.
Investment Promotion and Protection
Cooperation between the Parties, within the scope of their respective competencies, in the field of investment promotion and protection shall aim to bring about a favourable climate for private investment, both domestic and foreign, which is essential to economic and industrial revitalisation in Serbia. The particular aims of cooperation shall be for Serbia to improve the legal frameworks which favours and protects investment.
Industrial Cooperation
Cooperation shall aim to promote the modernisation and restructuring of industry and individual sectors in Serbia. It shall also cover industrial cooperation between economic operators, with the objective of strengthening the private sector under conditions which ensure that the environment is protected. Industrial cooperation initiatives shall reflect the priorities determined by both Parties. They shall take into account the regional aspects of industrial development, promoting trans-national partnerships when relevant. The initiatives should seek in particular to establish a suitable framework for undertakings, to improve management, know-how and to promote markets, market transparency and the business environment. Special attention shall be devoted to the establishment of efficient export promotion activities in Serbia. Cooperation shall take due account of the Community acquis in the field of industrial policy.
Small- and medium-sized enterprises
Cooperation between the Parties shall be aimed at developing and strengthening private sector small- and medium-sized enterprises (SMEs), the establishment of new undertakings in areas offering potential for growth and cooperation between SMEs in the Community and in Serbia. Cooperation shall take due account of priority areas related to the Community acquis in the field of SMEs, as well as the ten guidelines enshrined in the European Charter for Small Enterprises.
Tourism
Cooperation between the Parties in the field of tourism shall be mainly aimed at strengthening the flow of information on tourism (through international networks, databanks, etc.); encouraging the development of infrastructure conducive to investment in the tourism sector, participation of Serbia in important European tourism organisations. It shall also aim at studying the opportunities for joint operations and strengthening cooperation between tourism enterprises, experts and governments and their competent agencies in the field of tourism, as well as transferring know-how (through training, exchanges, seminars). Cooperation shall take due account of Community acquis related to this sector. Cooperation may be integrated into a regional framework of cooperation.
Agriculture, and the agro-industrial sector
Cooperation between the Parties shall be developed in all priority areas related to the Community acquis in the field of agriculture, as well as veterinary and phytosanitary domains. Cooperation shall notably aim at modernising and restructuring the agriculture and agro-industrial sector, in particular to reach community sanitary requirements, to improve water management and rural development as well as to develop the forestry sector in Serbia and at supporting the gradual approximation of Serbian legislation and practices to the Community rules and standards.
Fisheries
The Parties shall explore the possibility of identifying mutually beneficial areas of common interest in the fisheries sector. Cooperation shall take due account of priority areas related to the Community acquis in the field of fisheries, including the respect of international obligations concerning International and Regional Fisheries Organisation rules of management and conservation of fishery resources.
Customs
The Parties shall establish cooperation in this area with a view to guarantee compliance with the provisions to be adopted in the area of trade and to achieve the approximation of the customs systems of Serbia to that of the Community, thereby helping to pave the way for the liberalisation measures planned under this Agreement and for the gradual approximation of the Serbian customs legislation to the acquis . Cooperation shall take due account of priority areas related to the Community acquis in the field of customs. The rules on mutual administrative assistance between the Parties in the customs field are laid down in Protocol 6.
Taxation
The Parties shall establish cooperation in the field of taxation including measures aiming at the further reform of Serbia’s fiscal system and the restructuring of tax administration with a view to ensuring effectiveness of tax collection and the fight against fiscal fraud. Cooperation shall take due account of priority areas related to the Community acquis in the field of taxation and in the fight against harmful tax competition. Elimination of harmful tax competition should be carried out on the basis of the principles of the Code of Conduct for business taxation agreed by the Council on 1 December 1997. Cooperation shall also be geared to enhancing transparency and fighting corruption, and to include exchange of information with the Member States in an effort to facilitate the enforcement of measures preventing tax fraud, evasion and avoidance. Serbia shall also complete the network of bilateral Agreements with Member States, along the lines of the latest update of the OECD Model Tax Convention on Income and on Capital as well as on the basis of the OECD Model Agreement on Exchange of Information in Tax Matters, to the extent that the requesting Member State subscribes to these.
ANNEX I(a)
ANNEX I ANNEX I(a) SERBIAN TARIFF CONCESSIONS FOR COMMUNITY INDUSTRIAL PRODUCTS Referred to in Article 21 Duty rates will be reduced as follows: (a) on the date of entry into force of this Agreement, the import duty will be reduced to 70 % of the basic duty; (b) on 1 January of the first year following the date of entry into force of this Agreement, the import duty will be reduced to 40 % of basic duty; (c) on 1 January of the second year following the date of entry into force of this Agreement, the remaining import duties will be abolished. CN code Description 2501 00 Salt (including table salt and denatured salt) and pure sodium chloride, whether or not in aqueous solution or containing added anti-caking or free-flowing agents; sea water: Salt (including table salt and denatured salt) and pure sodium chloride, whether or not in aqueous solution or containing added anti-caking or free-flowing agents: Other: Other: 2501 00 91 Salt suitable for human consumption: ex 2501 00 91 Iodized ex 2501 00 91 Not iodized, for finishing 2501 00 99 Other 2515 Marble, travertine, ecaussine and other calcareous monumental or building stone of an apparent specific gravity of 2,5 or more, and alabaster, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape 2517 Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling or for railway or other ballast, shingle and flint, whether or not heat-treated; macadam of slag, dross or similar industrial waste, whether or not incorporating the materials cited in the first part of the heading; tarred macadam; granules, chippings and powder, of stones of heading 2515 or 2516 , whether or not heat-treated 2521 00 00 Limestone flux; limestone and other calcareous stone, of a kind used for the manufacture of lime or cement 2522 Quicklime, slaked lime and hydraulic lime, other than calcium oxide and hydroxide of heading 2825 : 2522 20 00 Slaked lime 2522 30 00 Hydraulic lime 2523 Portland cement, aluminous cement, slag cement, supersulphate cement and similar hydraulic cements, whether or not coloured or in the form of clinkers 2529 Feldspar; leucite; nepheline and nepheline syenite; fluorspar: 2529 10 00 Feldspar 2702 Lignite, whether or not agglomerated, excluding jet 2703 00 00 Peat (including peat litter), whether or not agglomerated 2711 Petroleum gases and other gaseous hydrocarbons: Liquefied: 2711 12 Propane: Propane of a purity not less than 99 %: 2711 12 11 For use as a power or heating fuel Other: For other purposes: 2711 12 94 Of a purity exceeding 90 % but less than 99 % 2711 12 97 Other 2711 14 00 Ethylene, propylene, butylene and butadiene 2801 Fluorine, chlorine, bromine and iodine: 2801 10 00 Chlorine 2802 00 00 Sulphur, sublimed or precipitated; colloidal sulphur 2804 Hydrogen, rare gases and other non-metals: Rare gases: 2804 21 00 Argon 2804 29 Other 2804 30 00 Nitrogen 2804 40 00 Oxygen 2806 Hydrogen chloride (hydrochloric acid); chlorosulphuric acid: 2806 10 00 Hydrogen chloride (hydrochloric acid) 2807 00 Sulphuric acid; oleum 2808 00 00 Nitric acid; sulphonitric acids 2809 Diphosphorus pentaoxide; phosphoric acid; polyphosphoric acids, whether or not chemically defined: 2809 10 00 Diphosphorus pentaoxide 2811 Other inorganic acids and other inorganic oxygen compounds of non-metals: Other inorganic acids: 2811 19 Other: 2811 19 10 Hydrogen bromide (hydrobromic acid) Other inorganic oxygen compounds of non-metals: 2811 21 00 Carbon dioxide 2811 29 Other 2812 Halides and halide oxides of non-metals: 2812 90 00 Other 2814 Ammonia, anhydrous or in aqueous solution 2816 Hydroxide and peroxide of magnesium; oxides, hydroxides and peroxides, of strontium or barium: 2816 10 00 Hydroxide and peroxide of magnesium 2817 00 00 Zinc oxide; zinc peroxide 2818 Artificial corundum, whether or not chemically defined; aluminium oxide; aluminium hydroxide: 2818 30 00 Aluminium hydroxide 2820 Manganese oxides 2825 Hydrazine and hydroxylamine and their inorganic salts; other inorganic bases; other metal oxides, hydroxides and peroxides: 2825 50 00 Copper oxides and hydroxides 2825 80 00 Antimony oxides 2826 Fluorides; fluorosilicates, fluoroaluminates and other complex fluorine salts: 2826 90 Other: 2826 90 80 Other: ex 2826 90 80 Fluorosilicates of sodium or of potassium 2827 Chlorides, chloride oxides and chloride hydroxides; bromides and bromide oxides; iodides and iodide oxides: 2827 10 00 Ammonium chloride 2827 20 00 Calcium chloride Other chlorides: 2827 35 00 Of nickel 2827 39 Other: 2827 39 10 Of tin 2827 39 20 Of iron 2827 39 30 Of cobalt 2827 39 85 Other: ex 2827 39 85 Of zinc Chloride oxides and chloride hydroxides: 2827 41 00 Of copper 2827 49 Other 2827 60 00 Iodides and iodide oxides 2828 Hypochlorites; commercial calcium hypochlorite; chlorites; hypobromites: 2828 90 00 Other 2829 Chlorates and perchlorates; bromates and perbromates; iodates and periodates: Chlorates: 2829 19 00 Other 2829 90 Other: 2829 90 10 Perchlorates 2829 90 80 Other 2830 Sulphides; polysulphides, whether or not chemically defined: 2830 90 Other: 2830 90 11 Sulphides of calcium, of antimony or of iron 2830 90 85 Other: ex 2830 90 85 Other than zinc sulphide or cadmium sulphide 2831 Dithionites and sulphoxylates: 2831 90 00 Other 2832 Sulphites; thiosulphates: 2832 10 00 Sodium sulphites 2832 20 00 Other sulphites 2833 Sulphates; alums; peroxosulphates (persulphates): Sodium sulphates: 2833 19 00 Other Other sulphates: 2833 21 00 Of magnesium 2833 25 00 Of copper 2833 29 Other: 2833 29 20 Of cadmium; of chromium; of zinc 2833 29 60 Of lead 2833 29 90 Other 2833 30 00 Alums 2833 40 00 Peroxosulphates (persulphates) 2834 Nitrites; nitrates: 2834 10 00 Nitrites Nitrates: 2834 29 Other 2835 Phosphinates (hypophosphites), phosphonates (phosphites) and phosphates; polyphosphates, whether or not chemically defined: Phosphates: 2835 22 00 Of mono- or disodium 2835 24 00 Of potassium 2835 25 Calcium hydrogenorthophosphate (‘dicalcium phosphate’) 2835 26 Other phosphates of calcium 2835 29 Other Polyphosphates: 2835 31 00 Sodium triphosphate (sodium tripolyphosphate) 2835 39 00 Other 2836 Carbonates; peroxocarbonates (percarbonates); commercial ammonium carbonate containing ammonium carbamate: 2836 40 00 Potassium carbonates 2836 50 00 Calcium carbonate Other: 2836 99 Other: Carbonates: 2836 99 17 Other: ex 2836 99 17 Commercial ammonium carbonate and other ammonium carbonates ex 2836 99 17 Lead carbonates 2839 Silicates; commercial alkali metal silicates: Of sodium: 2839 11 00 Sodium metasilicates 2839 19 00 Other 2841 Salts of oxometallic or peroxometallic acids: Manganites, manganates and permanganates: 2841 61 00 Potassium permanganate 2841 69 00 Other 2842 Other salts of inorganic acids or peroxoacids (including aluminosilicates whether or not chemically defined), other than azides: 2842 10 00 Double or complex silicates, including aluminosilicates whether or not chemically defined 2842 90 Other: 2842 90 10 Salts, double salts or complex salts of selenium or tellurium acids 2843 Colloidal precious metals; inorganic or organic compounds of precious metals, whether or not chemically defined; amalgams of precious metals 2849 Carbides, whether or not chemically defined: 2849 90 Other: 2849 90 30 Of tungsten 2853 00 Other inorganic compounds (including distilled or conductivity water and water of similar purity); liquid air (whether or not rare gases have been removed); compressed air; amalgams, other than amalgams of precious metals: 2853 00 10 Distilled and conductivity water and water of similar purity 2853 00 30 Liquid air (whether or not rare gases have been removed); compressed air 2903 Halogenated derivatives of hydrocarbons: Saturated chlorinated derivatives of acyclic hydrocarbons: 2903 13 00 Chloroform (trichloromethane) 2909 Ethers, ether-alcohols, ether-phenols, ether-alcohol-phenols, alcohol peroxides, ether peroxides, ketone peroxides (whether or not chemically defined), and their halogenated, sulphonated, nitrated or nitrosated derivatives: 2909 50 Ether-phenols, ether-alcohol-phenols and their halogenated, sulphonated, nitrated or nitrosated derivatives: 2909 50 90 Other 2910 Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a three-membered ring, and their halogenated, sulphonated, nitrated or nitrosated derivatives: 2910 40 00 Dieldrin (ISO, INN) 2910 90 00 Other 2912 Aldehydes, whether or not with other oxygen function; cyclic polymers of aldehydes; paraformaldehyde: Acyclic aldehydes without other oxygen function: 2912 11 00 Methanal (formaldehyde) 2915 Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives: Acetic acid and its salts; acetic anhydride: 2915 29 00 Other 2917 Polycarboxylic acids, their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives: 2917 20 00 Cyclanic, cyclenic or cycloterpenic polycarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and their derivatives 2918 Carboxylic acids with additional oxygen function and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives: Carboxylic acids with alcohol function but without other oxygen function, their anhydrides, halides, peroxides, peroxyacids and their derivatives: 2918 14 00 Citric acid 2930 Organo-sulphur compounds: 2930 30 00 Thiuram mono-, di- or tetrasulphides 3004 Medicaments (excluding goods of heading 3002 , 3005 or 3006 ) consisting of mixed or unmixed products for therapeutic or prophylactic uses, put up in measured doses (including those in the form of transdermal administration systems) or in forms or packings for retail sale: 3004 90 Other: Put up in forms or in packings of a kind sold by retail: 3004 90 19 Other 3102 Mineral or chemical fertilisers, nitrogenous: 3102 10 Urea, whether or not in aqueous solution Ammonium sulphate; double salts and mixtures of ammonium sulphate and ammonium nitrate: 3102 29 00 Other 3102 30 Ammonium nitrate, whether or not in aqueous solution 3102 40 Mixtures of ammonium nitrate with calcium carbonate or other inorganic nonfertilising substances 3102 90 00 Other, including mixtures not specified in the foregoing subheadings ex 3102 90 00 Other than calcium cyanimide 3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium; other fertilisers; goods of this chapter in tablets or similar forms or in packages of a gross weight not exceeding 10 kg: 3105 20 Mineral or chemical fertilisers containing the three fertilising elements nitrogen, phosphorus and potassium 3202 Synthetic organic tanning substances; inorganic tanning substances; tanning preparations, whether or not containing natural tanning substances; enzymatic preparations for pre-tanning: 3202 90 00 Other 3205 00 00 Colour lakes; preparations as specified in note 3 to this chapter based on colour lakes 3206 Other colouring matter; preparations as specified in note 3 to this chapter, other than those of heading 3203 , 3204 or 3205 ; inorganic products of a kind used as luminophores, whether or not chemically defined: Pigments and preparations based on titanium dioxide: 3206 19 00 Other 3206 20 00 Pigments and preparations based on chromium compounds Other colouring matter and other preparations: 3206 49 Other: 3206 49 30 Pigments and preparations based on cadmium compounds 3208 Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a nonaqueous medium; solutions as defined in note 4 to this chapter: 3208 90 Other: Solutions as defined in note 4 to this chapter: 3208 90 13 Copolymer of p -cresol and divinylbenzene, in the form of a solution in N,N -dimethylacetamide, containing by weight 48 % or more of polymer 3210 00 Other paints and varnishes (including enamels, lacquers and distempers); prepared water pigments of a kind used for finishing leather 3212 Pigments (including metallic powders and flakes) dispersed in non-aqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels); stamping foils; dyes and other colouring matter put up in forms or packings for retail sale: 3212 90 Other: Pigments (including metallic powders and flakes) dispersed in non-aqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels): 3212 90 31 With a basis of aluminium powder 3212 90 38 Other 3212 90 90 Dyes and other colouring matter put up in forms or packings for retail sale 3214 Glaziers’ putty, grafting putty, resin cements, caulking compounds and other mastics; painters’ fillings; non-refractory surfacing preparations for façades, indoor walls, floors, ceilings or the like 3506 Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg: Other: 3506 91 00 Adhesives based on polymers of headings 3901 to 3913 or on rubber 3601 00 00 Propellent powders 3602 00 00 Prepared explosives, other than propellent powders 3603 00 Safety fuses; detonating fuses; percussion or detonating caps; igniters; electric detonators 3605 00 00 Matches, other than pyrotechnic articles of heading 3604 3606 Ferro-cerium and other pyrophoric alloys in all forms; articles of combustible materials as specified in note 2 to this chapter: 3606 90 Other: 3606 90 10 Ferro-cerium and other pyrophoric alloys in all forms 3802 Activated carbon; activated natural mineral products; animal black, including spent animal black: 3802 10 00 Activated carbon 3806 Rosin and resin acids, and derivatives thereof; rosin spirit and rosin oils; run gums: 3806 20 00 Salts of rosin, of resin acids or of derivatives of rosin or resin acids, other than salts of rosin adducts 3807 00 Wood tar; wood tar oils; wood creosote; wood naphtha; vegetable pitch; brewers’ pitch and similar preparations based on rosin, resin acids or on vegetable pitch 3810 Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods: 3810 90 Other: 3810 90 90 Other 3817 00 Mixed alkylbenzenes and mixed alkylnaphthalenes, other than those of heading 2707 or 2902 : 3817 00 50 Linear alkylbenzene 3819 00 00 Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals 3820 00 00 Anti-freezing preparations and prepared de-icing fluids 3824 Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included: 3824 30 00 Non-agglomerated metal carbides mixed together or with metallic binders 3824 40 00 Prepared additives for cements, mortars or concretes 3824 50 Non-refractory mortars and concretes 3824 90 Other: 3824 90 40 Inorganic composite solvents and thinners for varnishes and similar products Other: Products and preparations for pharmaceutical or surgical uses: 3824 90 61 Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Streptomyces tenebrarius , whether or not dried, for use in the manufacture of human medicaments of heading 3004 3824 90 64 Other 3901 Polymers of ethylene, in primary forms: 3901 10 Polyethylene having a specific gravity of less than 0,94: 3901 10 90 Other 3916 Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics: 3916 20 Of polymers of vinyl chloride: 3916 20 10 Of poly(vinyl chloride) 3916 90 Of other plastics: 3916 90 90 Other 3917 Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics: 3917 10 Artificial guts (sausage casings) of hardened protein or of cellulosic materials: 3917 10 10 Of hardened protein Other tubes, pipes and hoses: 3917 31 00 Flexible tubes, pipes and hoses, having a minimum burst pressure of 27,6 MPa: ex 3917 31 00 Whether or not with fittings attached, for other use than in civil aircraft 3917 32 Other, not reinforced or otherwise combined with other materials, without fittings: Other: 3917 32 91 Artificial sausage casings 3917 40 00 Fittings: ex 3917 40 00 For other use than in civil aircraft 3919 Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls 3920 Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials: 3920 10 Of polymers of ethylene: Of a thickness not exceeding 0,125 mm: Of polyethylene having a specific gravity of: Less than 0,94: 3920 10 23 Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits Other: Not printed: 3920 10 24 Stretch film 3920 10 26 Other 3920 10 27 Printed 3920 10 28 0,94 or more 3920 10 40 Other Of a thickness exceeding 0,125 mm: 3920 10 89 Other 3920 20 Of polymers of propylene 3920 30 00 Of polymers of styrene Of polymers of vinyl chloride: 3920 43 Containing by weight not less than 6 % of plasticisers 3920 49 Other Of acrylic polymers: 3920 51 00 Of poly(methyl methacrylate) 3920 59 Other Of polycarbonates, alkyd resins, polyallyl esters or other polyesters: 3920 61 00 Of polycarbonates 3920 62 Of poly(ethylene terephthalate) 3920 63 00 Of unsaturated polyesters 3920 69 00 Of other polyesters Of cellulose or its chemical derivatives: 3920 71 Of regenerated cellulose: 3920 71 10 Sheets, film or strip, coiled or not, of a thickness of less than 0,75 mm: ex 3920 71 10 Other than for dialysator 3920 71 90 Other 3920 73 Of cellulose acetate: 3920 73 50 Sheets, film or strip, coiled or not, of a thickness of less than 0,75 mm 3920 73 90 Other 3920 79 Of other cellulose derivatives 3920 79 90 Other Of other plastics: 3920 92 00 Of polyamides 3920 93 00 Of amino-resins 3920 94 00 Of phenolic resins 3920 99 Of other plastics: Of condensation or rearrangement polymerisation products, whether or not chemically modified: 3920 99 21 Polyimide sheet and strip, uncoated, or coated or covered solely with plastic 3920 99 28 Other Of addition polymerisation products: 3920 99 55 Biaxially oriented poly(vinyl alcohol) film, containing by weight 97 % or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mm 3920 99 59 Other 3920 99 90 Other 3921 Other plates, sheets, film, foil and strip, of plastics: 3921 90 Other 4002 Synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip; mixtures of any product of heading 4001 with any product of this heading, in primary forms or in plates, sheets or strip: Styrene-butadiene rubber (SBR); carboxylated styrene-butadiene rubber (XSBR): 4002 19 Other 4005 Compounded rubber, unvulcanised, in primary forms or in plates, sheets or strip: Other: 4005 99 00 Other 4007 00 00 Vulcanised rubber thread and cord 4008 Plates, sheets, strip, rods and profile shapes, of vulcanised rubber other than hard rubber: Of cellular rubber: 4008 11 00 Plates, sheets and strip 4008 19 00 Other Of non-cellular rubber: 4008 29 00 Other: ex 4008 29 00 Other than cut to size profile shapes for use in civil aircraft 4010 Conveyor or transmission belts or belting, of vulcanised rubber: Conveyor belts or belting: 4010 11 00 Reinforced only with metal 4011 New pneumatic tyres, of rubber: 4011 20 Of a kind used on buses or lorries: 4011 20 10 With a load index not exceeding 121: ex 4011 20 10 Having a rim size not exceeding 61 cm Other, having a ‘herring-bone’ or similar tread: 4011 61 00 Of a kind used on agricultural or forestry vehicles and machines 4011 62 00 Of a kind used on construction or industrial handling vehicles and machines and having a rim size not exceeding 61 cm 4011 63 00 Of a kind used on construction or industrial handling vehicles and machines and having a rim size exceeding 61 cm Other: 4011 92 00 Of a kind used on agricultural or forestry vehicles and machines 4011 93 00 Of a kind used on construction or industrial handling vehicles and machines and having a rim size not exceeding 61 cm 4011 94 00 Of a kind used on construction or industrial handling vehicles and machines and having a rim size exceeding 61 cm 4205 00 Other articles of leather or of composition leather: Of a kind used in machinery or mechanical appliances or for other technical uses: 4205 00 11 Conveyor or transmission belts or belting 4205 00 19 Other 4206 00 00 Articles of gut (other than silkworm gut), of goldbeater’s skin, of bladders or of tendons: ex 4206 00 00 Other than catgut 4411 Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances: Other: 4411 94 Of a density not exceeding 0,5 g/cm 3 : 4411 94 10 Not mechanically worked or surface covered: ex 4411 94 10 Of a density not exceeding 0,35 g/cm 3 4411 94 90 Other: ex 4411 94 90 Of a density not exceeding 0,35 g/cm 3 4412 Plywood, veneered panels and similar laminated wood: Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: 4412 31 With at least one outer ply of tropical wood specified in subheading note 1 to this chapter: 4412 31 10 Of acajou d’Afrique, dark red meranti, light red meranti, limba, mahogany ( Swietenia spp.), obeche, okoumé, palissandre de Para, palissandre de Rio, palissandre de Rose, sapelli, sipo, virola and white lauan Other: 4412 94 Blockboard, laminboard and battenboard: 4412 94 10 With at least one outer ply of non-coniferous wood ex 4412 94 10 Other than containing at least one layer of particle board 4412 99 Other: 4412 99 70 Other 4413 00 00 Densified wood, in blocks, plates, strips or profile shapes 4416 00 00 Casks, barrels, vats, tubs and other coopers’ products and parts thereof, of wood, including staves 4419 00 Tableware and kitchenware, of wood 4420 Wood marquetry and inlaid wood; caskets and cases for jewellery or cutlery, and similar articles, of wood; statuettes and other ornaments, of wood; wooden articles of furniture not falling in Chapter 94 4602 Basketwork, wickerwork and other articles, made directly to shape from plaiting materials or made up from goods of heading 4601 ; articles of loofah: Of vegetable materials: 4602 11 00 Of bamboo: ex 4602 11 00 Other than straw envelopes for bottles or basketwork, wickerwork and other articles, made directly to shape from plaiting materials 4602 12 00 Of rattan: ex 4602 12 00 Other than straw envelopes for bottles or basketwork, wickerwork and other articles, made directly to shape from plaiting materials 4602 19 Other: Other: 4602 19 99 Other 4602 90 00 Other 4802 Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls or rectangular (including square) sheets, of any size, other than paper of heading 4801 or 4803 ; handmade paper and paperboard: Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres: 4802 55 Weighing 40 g/m 2 or more but not more than 150 g/m 2 , in rolls Other paper and paperboard, of which more than 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process: 4802 61 In rolls 4802 61 15 Weighing less than 72 g/m 2 and of which more than 50 % by weight of the total fibre content consists of fibres obtained by a mechanical process ex 4802 61 15 Other than carbonising base paper 4802 61 80 Other 4802 62 00 In sheets with one side not exceeding 435 mm and the other side not exceeding 297 mm in the unfolded state ex 4802 62 00 Other than carbonising base paper 4802 69 00 Other ex 4802 69 00 Other than carbonising base paper 4804 Uncoated kraft paper and paperboard, in rolls or sheets, other than that of heading 4802 or 4803 : Other kraft paper and paperboard weighing 225 g/m 2 or more: 4804 59 Other 4805 Other uncoated paper and paperboard, in rolls or sheets, not further worked or processed than as specified in note 3 to this chapter: Fluting paper: 4805 11 00 Semi-chemical fluting paper 4805 12 00 Straw fluting paper 4805 19 Other Testliner (recycled liner board): 4805 24 00 Weighing 150 g/m 2 or less 4805 25 00 Weighing more than 150 g/m 2 4805 30 Sulphite wrapping paper Other: 4805 91 00 Weighing 150 g/m 2 or less 4810 Paper and paperboard, coated on one or both sides with kaolin (China clay) or other inorganic substances, with or without a binder, and with no other coating, whether or not surface-coloured, surface-decorated or printed, in rolls or rectangular (including square) sheets, of any size: Paper and paperboard of a kind used for writing, printing or other graphic purposes, of which more than 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process: 4810 29 Other Kraft paper and paperboard, other than that of a kind used for writing, printing or other graphic purposes: 4810 31 00 Bleached uniformly throughout the mass and of which more than 95 % by weight of the total fibre content consists of wood fibres obtained by a chemical process, and weighing 150 g/m 2 or less 4810 32 Bleached uniformly throughout the mass and of which more than 95 % by weight of the total fibre content consists of wood fibres obtained by a chemical process, and weighing more than 150 g/m 2 4810 39 00 Other Other paper and paperboard: 4810 92 Multi-ply 4810 99 Other 4811 Paper, paperboard, cellulose wadding and webs of cellulose fibres, coated, impregnated, covered, surface-coloured, surface-decorated or printed, in rolls or rectangular (including square) sheets, of any size, other than goods of the kind described in heading 4803 , 4809 or 4810 : 4811 10 00 Tarred, bituminised or asphalted paper and paperboard Paper and paperboard, coated, impregnated or covered with plastics (excluding adhesives): 4811 51 00 Bleached, weighing more than 150 g/m 2 ex 4811 51 00 Floor coverings on a base of paper or of a paperboard, whether or not cut to size 4811 59 00 Other ex 4811 59 00 Floor coverings on a base of paper or of a paperboard, whether or not cut to size 4811 90 00 Other paper, paperboard, cellulose wadding and webs of cellulose fibres 4818 Toilet paper and similar paper, cellulose wadding or webs of cellulose fibres, of a kind used for household or sanitary purposes, in rolls of a width not exceeding 36 cm, or cut to size or shape; handkerchiefs, cleansing tissues, towels, tablecloths, serviettes, napkins for babies, tampons, bed sheets and similar household, sanitary or hospital articles, articles of apparel and clothing accessories, of paper pulp, paper, cellulose wadding or webs of cellulose fibres: 4818 10 Toilet paper: 4818 10 10 Weighing, per ply, 25 g/m 2 or less 4818 10 90 Weighing, per ply, more than 25 g/m 2 4818 40 Sanitary towels and tampons, napkins and napkin liners for babies and similar sanitary articles: Sanitary towels, tampons and similar articles: 4818 40 19 Other 4818 50 00 Articles of apparel and clothing accessories 4823 Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape; other articles of paper pulp, paper, paperboard, cellulose wadding or webs of cellulose fibres: 4823 90 Other: 4823 90 85 Other ex 4823 90 85 Floor coverings on a base of paper or of paperboard, whether or not cut to size 4908 Transfers (decalcomanias) 6501 00 00 Hat-forms, hat bodies and hoods of felt, neither blocked to shape nor with made brims; plateaux and manchons (including slit manchons), of felt 6502 00 00 Hat-shapes, plaited or made by assembling strips of any material, neither blocked to shape, nor with made brims, nor lined, nor trimmed 6504 00 00 Hats and other headgear, plaited or made by assembling strips of any material, whether or not lined or trimmed 6505 Hats and other headgear, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed; hairnets of any material, whether or not lined or trimmed 6506 Other headgear, whether or not lined or trimmed: 6506 10 Safety headgear: 6506 10 80 Of other materials Other: 6506 91 00 Of rubber or of plastics 6506 99 Of other materials 6507 00 00 Headbands, linings, covers, hat foundations, hat frames, peaks and chinstraps, for headgear 6601 Umbrellas and sun umbrellas (including walking-stick umbrellas, garden umbrellas and similar umbrellas) 6603 Parts, trimmings and accessories of articles of heading 6601 or 6602 : 6603 20 00 Umbrella frames, including frames mounted on shafts (sticks) 6603 90 Other: 6603 90 10 Handles and knobs 6703 00 00 Human hair, dressed, thinned, bleached or otherwise worked; wool or other animal hair or other textile materials, prepared for use in making wigs or the like 6704 Wigs, false beards, eyebrows and eyelashes, switches and the like, of human or animal hair or of textile materials; articles of human hair not elsewhere specified or included 6804 Millstones, grindstones, grinding wheels and the like, without frameworks, for grinding, sharpening, polishing, trueing or cutting, hand sharpening or polishing stones, and parts thereof, of natural stone, of agglomerated natural or artificial abrasives, or of ceramics, with or without parts of other materials: Other millstones, grindstones, grinding wheels and the like: 6804 22 Of other agglomerated abrasives or of ceramics 6805 Natural or artificial abrasive powder or grain, on a base of textile material, of paper, of paperboard or of other materials, whether or not cut to shape or sewn or otherwise made up 6807 Articles of asphalt or of similar material (for example, petroleum bitumen or coal tar pitch) 6808 00 00 Panels, boards, tiles, blocks and similar articles of vegetable fibre, of straw or of shavings, chips, particles, sawdust or other waste of wood, agglomerated with cement, plaster or other mineral binders 6809 Articles of plaster or of compositions based on plaster 6811 Articles of asbestos-cement, of cellulose fibre-cement or the like 6812 Fabricated asbestos fibres; mixtures with a basis of asbestos or with a basis of asbestos and magnesium carbonate; articles of such mixtures or of asbestos (for example, thread, woven fabric, clothing, headgear, footwear, gaskets), whether or not reinforced, other than goods of heading 6811 or 6813 : 6812 80 Of crocidolite: 6812 80 10 Fabricated fibres; mixtures with a basis of asbestos or with a basis of asbestos and magnesium carbonate: ex 6812 80 10 Other than for use in civil aircraft 6812 80 90 Other: ex 6812 80 90 Other than for use in civil aircraft Other: 6812 91 00 Clothing, clothing accessories, footwear and headgear 6812 92 00 Paper, millboard and felt 6812 93 00 Compressed asbestos fibre jointing, in sheets or rolls 6812 99 Other: 6812 99 10 Fabricated asbestos fibres; mixtures with a basis of asbestos or with a basis of asbestos and magnesium carbonate: ex 6812 99 10 Other than for use in civil aircraft 6812 99 90 Other: ex 6812 99 90 Other than for use in civil aircraft 6813 Friction material and articles thereof (for example, sheets, rolls, strips, segments, discs, washers, pads), not mounted, for brakes, for clutches or the like, with a basis of asbestos, of other mineral substances or of cellulose, whether or not combined with textile or other materials: Not containing asbestos: 6813 89 00 Other: ex 6813 89 00 Other than for use in civil aircraft 6814 Worked mica and articles of mica, including agglomerated or reconstituted mica, whether or not on a support of paper, paperboard or other materials: 6814 90 00 Other 6815 Articles of stone or of other mineral substances (including carbon fibres, articles of carbon fibres and articles of peat), not elsewhere specified or included: 6815 20 00 Articles of peat 6902 Refractory bricks, blocks, tiles and similar refractory ceramic constructional goods, other than those of siliceous fossil meals or similar siliceous earths: 6902 10 00 Containing, by weight, singly or together, more than 50 % of the elements Mg, Ca or Cr, expressed as MgO, CaO or Cr 2 O 3: ex 6902 10 00 Blocks for the glass furnaces 6902 20 Containing, by weight, more than 50 % of alumina (Al 2 O 3 ), of silica (SiO 2 ) or of a mixture or compound of these products: Other: 6902 20 99 Other: ex 6902 20 99 Blocks for the glass furnaces 6903 Other refractory ceramic goods (for example, retorts, crucibles, muffles, nozzles, plugs, supports, cupels, tubes, pipes, sheaths and rods), other than those of siliceous fossil meals or of similar siliceous earths: 6903 10 00 Containing, by weight, more than 50 % of graphite or other carbon or of a mixture of these products 7002 Glass in balls (other than microspheres of heading 7018 ), rods or tubes, unworked: 7002 20 Rods Tubes: 7002 32 00 Of other glass having a linear coefficient of expansion not exceeding 5 × 10–6 per Kelvin within a temperature range of 0 °C to 300 °C 7004 Drawn glass and blown glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked: 7004 90 Other glass: 7004 90 70 Horticultural sheet glass 7006 00 Glass of heading 7003 , 7004 or 7005 , bent, edge-worked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials: 7006 00 90 Other 7009 Glass mirrors, whether or not framed, including rear-view mirrors: Other: 7009 91 00 Unframed 7009 92 00 Framed 7010 Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass: 7010 20 00 Stoppers, lids and other closures 7016 Paving blocks, slabs, bricks, squares, tiles and other articles of pressed or moulded glass, whether or not wired, of a kind used for building or construction purposes; glass cubes and other glass smallwares, whether or not on a backing, for mosaics or similar decorative purposes; leaded lights and the like; multicellular or foam glass in blocks, panels, plates, shells or similar forms: 7016 90 Other 7017 Laboratory, hygienic or pharmaceutical glassware, whether or not graduated or calibrated 7018 Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares, and articles thereof other than imitation jewellery; glass eyes other than prosthetic articles; statuettes and other ornaments of lamp-worked glass, other than imitation jewellery; glass microspheres not exceeding 1 mm in diameter: 7018 90 Other: 7018 90 10 Glass eyes; articles of glass smallware 7019 Glass fibres (including glass wool) and articles thereof (for example, yarn, woven fabrics): Slivers, rovings, yarn and chopped strands: 7019 12 00 Rovings 7019 19 Other: 7019 19 90 Of staple fibres Thin sheets (voiles), webs, mats, mattresses, boards and similar non-woven products: 7019 32 00 Thin sheets (voiles): ex 7019 32 00 Of a width not exceeding 200 cm Other woven fabrics: 7019 51 00 Of a width not exceeding 30 cm 7019 90 Other 7101 Pearls, natural or cultured, whether or not worked or graded but not strung, mounted or set; pearls, natural or cultured, temporarily strung for convenience of transport 7102 Diamonds, whether or not worked, but not mounted or set: 7102 10 00 Unsorted Non-industrial: 7102 31 00 Unworked or simply sawn, cleaved or bruted 7102 39 00 Other 7103 Precious stones (other than diamonds) and semi-precious stones, whether or not worked or graded but not strung, mounted or set; ungraded precious stones (other than diamonds) and semi-precious stones, temporarily strung for convenience of transport 7104 Synthetic or reconstructed precious or semi-precious stones, whether or not worked or graded but not strung, mounted or set; ungraded synthetic or reconstructed precious or semi-precious stones, temporarily strung for convenience of transport: 7104 20 00 Other, unworked or simply sawn or roughly shaped 7104 90 00 Other 7106 Silver (including silver plated with gold or platinum), unwrought or in semimanufactured forms, or in powder form 7107 00 00 Base metals clad with silver, not further worked than semi-manufactured 7108 Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form: Non-monetary: 7108 11 00 Powder 7108 13 Other semi-manufactured forms 7108 20 00 Monetary 7109 00 00 Base metals or silver, clad with gold, not further worked than semi-manufactured 7110 Platinum, unwrought or in semi-manufactured forms, or in powder form 7111 00 00 Base metals, silver or gold, clad with platinum, not further worked than semi-manufactured 7112 Waste and scrap of precious metal or of metal clad with precious metal; other waste and scrap containing precious metal or precious-metal compounds, of a kind used principally for the recovery of precious metal 7115 Other articles of precious metal or of metal clad with precious metal: 7115 90 Other 7116 Articles of natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed) 7117 Imitation jewellery: Of base metal, whether or not plated with precious metal: 7117 11 00 Cuff links and studs 7117 19 Other: Without parts of glass: 7117 19 91 Gilt, silvered or platinum plated 7118 Coin 7213 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: Other: 7213 91 Of circular cross-section measuring less than 14 mm in diameter: 7213 91 10 Of a type used for concrete reinforcement 7307 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel: Cast fittings: 7307 11 Of non-malleable cast iron: 7307 11 90 Other 7307 19 Other Other, of stainless steel: 7307 21 00 Flanges 7307 22 Threaded elbows, bends and sleeves: 7307 22 90 Elbows and bends 7307 23 Butt welding fittings 7307 29 Other 7307 29 10 Threaded 7307 29 90 Other Other: 7307 91 00 Flanges 7307 92 Threaded elbows, bends and sleeves: 7307 92 90 Elbows and bends 7307 93 Butt welding fittings: With greatest external diameter not exceeding 609,6 mm: 7307 93 11 Elbows and bends 7307 93 19 Other With greatest external diameter exceeding 609,6 mm: 7307 93 91 Elbows and bends 7307 99 Other 7308 Structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel: 7308 30 00 Doors, windows and their frames and thresholds for doors 7308 90 Other: 7308 90 10 Weirs, sluices, lock-gates, landing stages, fixed docks and other maritime and waterway structures Other: Solely or principally of sheet: 7308 90 59 Other 7309 00 Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment: For liquids: 7309 00 30 Lined or heat-insulated Other, of a capacity: 7309 00 51 Exceeding 100 000 l 7309 00 59 Not exceeding 100 000 l 7309 00 90 For solids 7314 Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel: Other cloth, grill, netting and fencing: 7314 41 Plated or coated with zinc: 7314 41 90 Other 7315 Chain and parts thereof, of iron or steel: Articulated link chain and parts thereof: 7315 11 Roller chain: 7315 11 90 Other 7315 12 00 Other chain 7315 19 00 Parts 7315 20 00 Skid chain Other chain: 7315 82 Other, welded link: 7315 82 10 The constituent material of which has a maximum cross-sectional dimension of 16 mm or less 7315 89 00 Other 7315 90 00 Other parts 7403 Refined copper and copper alloys, unwrought: Refined copper: 7403 12 00 Wire-bars 7403 13 00 Billets 7403 19 00 Other Copper alloys: 7403 22 00 Copper-tin base alloys (bronze) 7403 29 00 Other copper alloys (other than master alloys of heading 7405 ) 7405 00 00 Master alloys of copper 7408 Copper wire: Of refined copper: 7408 11 00 Of which the maximum cross-sectional dimension exceeds 6 mm 7410 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15 mm: Not backed: 7410 12 00 Of copper alloys 7413 00 Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated: 7413 00 20 Of refined copper: ex 7413 00 20 Whether or not with fittings attached, for other use than in civil aircraft 7413 00 80 Of copper alloys: ex 7413 00 80 Whether or not with fittings attached, for other use than in civil aircraft 7415 Nails, tacks, drawing pins, staples (other than those of heading 8305 ) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper 7418 Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper: Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like: 7418 11 00 Pot scourers and scouring or polishing pads, gloves and the like 7418 19 Other 7419 Other articles of copper: 7419 10 00 Chain and parts thereof Other: 7419 91 00 Cast, moulded, stamped or forged, but not further worked 7419 99 Other: 7419 99 10 Cloth (including endless bands), grill and netting, of wire of which no cross-sectional dimension exceeds 6 mm; expanded metal 7419 99 30 Springs 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm: Not backed: 7607 11 Rolled but not further worked 7607 19 Other: 7607 19 10 Of a thickness of less than 0,021 mm Of a thickness of not less than 0,021 mm but not more than 0,2 mm: 7607 19 99 Other 7607 20 Backed: 7607 20 10 Of a thickness (excluding any backing) of less than 0,021 mm Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm: 7607 20 99 Other 7610 Aluminium structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures: 7610 90 Other: 7610 90 90 Other 8202 Handsaws; blades for saws of all kinds (including slitting, slotting or toothless saw blades): 8202 20 00 Bandsaw blades Circular saw blades (including slitting or slotting saw blades): 8202 31 00 With working part of steel 8202 39 00 Other, including parts Other saw blades: 8202 91 00 Straight saw blades, for working metal 8202 99 Other: With working part of steel: 8202 99 19 For working other materials 8203 Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal-cutting shears, pipe-cutters, bolt croppers, perforating punches and similar hand tools: 8203 10 00 Files, rasps and similar tools 8203 20 Pliers (including cutting pliers), pincers, tweezers and similar tools: 8203 20 90 Other 8203 30 00 Metal-cutting shears and similar tools 8203 40 00 Pipe-cutters, bolt croppers, perforating punches and similar tools 8204 Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); interchangeable spanner sockets, with or without handles 8207 Interchangeable tools for hand tools, whether or not power-operated, or for machine tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock-drilling or earth-boring tools: 8207 20 Dies for drawing or extruding metal: 8207 20 90 With working part of other materials 8210 00 00 Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink 8301 Padlocks and locks (key, combination or electrically operated), of base metal; clasps and frames with clasps, incorporating locks, of base metal; keys for any of the foregoing articles, of base metal: 8301 20 00 Locks of a kind used for motor vehicles 8302 Base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal: 8302 10 00 Hinges: ex 8302 10 00 Other than for use in civil aircraft 8302 20 00 Castors: ex 8302 20 00 Other than for use in civil aircraft Other mountings, fittings and similar articles: 8302 42 00 Other, suitable for furniture: ex 8302 42 00 Other than for use in civil aircraft 8302 49 00 Other: ex 8302 49 00 Other than for use in civil aircraft 8302 50 00 Hat-racks, hat-pegs, brackets and similar fixtures 8302 60 00 Automatic door closers: ex 8302 60 00 Other than for use in civil aircraft 8303 00 Armoured or reinforced safes, strongboxes and doors and safe deposit lockers for strong-rooms, cash or deed boxes and the like, of base metal: 8303 00 10 Armoured or reinforced safes and strongboxes 8303 00 90 Cash or deed boxes and the like 8305 Fittings for loose-leaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal: 8305 10 00 Fittings for loose-leaf binders or files 8306 Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal: Statuettes and other ornaments: 8306 29 Other 8306 30 00 Photograph, picture or similar frames; mirrors 8307 Flexible tubing of base metal, with or without fittings: 8307 90 00 Of other base metal 8308 Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing, footwear, awnings, handbags, travel goods or other made-up articles, tubular or bifurcated rivets, of base metal; beads and spangles of base metal: 8309 Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal: 8309 90 Other: 8309 90 10 Capsules of lead; capsules of aluminium of a diameter exceeding 21 mm 8309 90 90 Other: ex 8309 90 90 Other than aluminium tops for food or drink cans 8310 00 00 Sign-plates, nameplates, address-plates and similar plates, numbers, letters and other symbols, of base metal, excluding those of heading 9405 8311 Wire, rods, tubes, plates, electrodes and similar products, of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying: 8311 30 00 Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame 8415 Air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated: 8415 10 Window or wall types, self-contained or ‘split-system’: 8415 10 90 Split-system Other: 8415 82 00 Other, incorporating a refrigerating unit: ex 8415 82 00 Other than for use in civil aircraft 8415 83 00 Not incorporating a refrigerating unit: ex 8415 83 00 Other than for use in civil aircraft 8415 90 00 Parts: ex 8415 90 00 Other than parts of air-conditioning machines of subheading 8415 81 , 8415 82 or 8415 83 for use in civil aircraft 8418 Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air-conditioning machines of heading 8415 : 8418 10 Combined refrigerator-freezers, fitted with separate external doors: 8418 10 20 Of a capacity exceeding 340 litres: ex 8418 10 20 Other than for use in civil aircraft 8418 10 80 Other: ex 8418 10 80 Other than for use in civil aircraft Parts: 8418 99 Other 8419 Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514 ), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, nonelectric: Dryers: 8419 32 00 For wood, paper pulp, paper or paperboard 8419 40 00 Distilling or rectifying plant 8419 50 00 Heat-exchange units: ex 8419 50 00 Other than for use in civil aircraft Other machinery, plant and equipment: 8419 89 Other: 8419 89 10 Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water 8419 89 98 Other 8421 Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases: Parts: 8421 91 00 Of centrifuges, including centrifugal dryers: ex 8421 91 00 Other than of apparatus of subheading 8421 19 94 and other than of spinners for coating photographic emulsions on LCD substrates of subheading 8421 19 99 8421 99 00 Other 8424 Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sandblasting machines and similar jet projecting machines: 8424 30 Steam or sandblasting machines and similar jet projecting machines Other appliances: 8424 81 Agricultural or horticultural 8425 Pulley tackle and hoists other than skip hoists; winches and capstans; jacks: Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles: 8425 19 Other: 8425 19 20 Manually operated chain hoists: ex 8425 19 20 Other than for use in civil aircraft 8425 19 80 Other: ex 8425 19 80 Other than for use in civil aircraft 8426 Ships’ derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane: Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes, mobile lifting frames and straddle carriers: 8426 11 00 Overhead travelling cranes on fixed support 8426 20 00 Tower cranes 8427 Fork-lift trucks; other works trucks fitted with lifting or handling equipment: 8428 Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics): 8428 10 Lifts and skip hoists: 8428 10 20 Electrically operated: ex 8428 10 20 Other than for use in civil aircraft 8428 10 80 Other: ex 8428 10 80 Other than for use in civil aircraft 8430 Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; piledrivers and pile extractors; snowploughs and snowblowers: Other boring or sinking machinery: 8430 49 00 Other 8430 50 00 Other machinery, self-propelled 8450 Household or laundry-type washing machines, including machines which both wash and dry: 8450 20 00 Machines, each of a dry linen capacity exceeding 10 kg 8450 90 00 Parts 8465 Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials: 8465 10 Machines which can carry out different types of machining operations without tool change between such operations Other: 8465 91 Sawing machines 8465 92 00 Planing, milling or moulding (by cutting) machines 8465 93 00 Grinding, sanding or polishing machines 8465 94 00 Bending or assembling machines 8465 95 00 Drilling or morticing machines 8465 96 00 Splitting, slicing or paring machines 8465 99 Other: 8465 99 90 Other 8470 Calculating machines and pocket-size data-recording, reproducing and displaying machines with calculating functions; accounting machines, postage-franking machines, ticket-issuing machines and similar machines, incorporating a calculating device; cash registers: 8470 50 00 Cash registers 8474 Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand: 8474 20 Crushing or grinding machines: Mixing or kneading machines: 8474 31 00 Concrete or mortar mixers 8474 90 Parts 8476 Automatic goods-vending machines (for example, postage stamp, cigarette, food or beverage machines), including money-changing machines: Automatic beverage-vending machines: 8476 21 00 Incorporating heating or refrigerating devices 8476 90 00 Parts 8479 Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter: 8479 50 00 Industrial robots, not elsewhere specified or included 8480 Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics: 8480 30 Moulding patterns: 8480 30 90 Other 8480 60 Moulds for mineral materials Moulds for rubber or plastics: 8480 71 00 Injection or compression types 8480 79 00 Other 8481 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves: 8481 10 Pressure-reducing valves: 8481 20 Valves for oleohydraulic or pneumatic transmissions: 8481 30 Check (non-return) valves: 8481 40 Safety or relief valves: 8481 80 Other appliances: Other: Process control valves: 8481 80 51 Temperature regulators Other: 8481 80 81 Ball and plug valves 8482 Ball or roller bearings: 8482 30 00 Spherical roller bearings 8482 50 00 Other cylindrical roller bearings 8483 Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints): 8483 10 Transmission shafts (including cam shafts and crank shafts) and cranks: 8483 10 95 Other: ex 8483 10 95 Other than for use in civil aircraft 8483 20 Bearing housings, incorporating ball or roller bearings: 8483 20 90 Other 8483 30 Bearing housings, not incorporating ball or roller bearings; plain shaft bearings: Bearing housings: 8483 30 32 For ball or roller bearings: ex 8483 30 32 Other than for use in civil aircraft 8483 30 38 Other: ex 8483 30 38 Other than for use in civil aircraft 8483 40 Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters: Gears and gearing (other than friction gears): 8483 40 21 Spur and helical: ex 8483 40 21 Other than for use in civil aircraft 8483 40 23 Bevel and bevel/spur: ex 8483 40 23 Other than for use in civil aircraft 8483 40 25 Worm gear: ex 8483 40 25 Other than for use in civil aircraft 8483 40 29 Other: ex 8483 40 29 Other than for use in civil aircraft Gear boxes and other speed changers: 8483 40 51 Gear boxes: ex 8483 40 51 Other than for use in civil aircraft 8483 40 59 Other: ex 8483 40 59 Other than for use in civil aircraft 8483 50 Flywheels and pulleys, including pulley blocks: 8483 50 20 Of cast iron or cast steel: ex 8483 50 20 Other than for use in civil aircraft 8483 50 80 Other: ex 8483 50 80 Other than for use in civil aircraft 8483 90 Toothed wheels, chain sprockets and other transmission elements presented separately; parts: Other: 8483 90 81 Of cast iron or cast steel: ex 8483 90 81 Other than for use in civil aircraft 8483 90 89 Other: ex 8483 90 89 Other than for use in civil aircraft 8484 Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals: 8484 90 00 Other: ex 8484 90 00 Other than for use in civil aircraft 8504 Electrical transformers, static converters (for example, rectifiers) and inductors: 8504 40 Static converters: 8504 40 30 Of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof: ex 8504 40 30 Other than for use in civil aircraft 8505 Electromagnets; permanent magnets and articles intended to become permanent magnets after magnetisation; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads: 8505 90 Other, including parts: 8505 90 10 Electromagnets 8510 Shavers, hair clippers and hair-removing appliances, with self-contained electric motor: 8510 10 00 Shavers 8510 20 00 Hair clippers 8510 30 00 Hair-removing appliances 8512 Electrical lighting or signalling equipment (excluding articles of heading 8539 ), windscreen wipers, defrosters and demisters, of a kind used for cycles or motor vehicles: 8512 20 00 Other lighting or visual signalling equipment 8512 30 Sound signalling equipment: 8512 30 10 Burglar alarms of a kind used for motor vehicles 8512 90 Parts 8513 Portable electric lamps designed to function by their own source of energy (for example, dry batteries, accumulators, magnetos), other than lighting equipment of heading 8512 8516 Electric instantaneous or storage water heaters and immersion heaters; electric space-heating apparatus and soil-heating apparatus; electrothermic hairdressing apparatus (for example, hairdryers, hair curlers, curling tong heaters) and hand dryers; electric smoothing irons; other electrothermic appliances of a kind used for domestic purposes; electric heating resistors, other than those of heading 8545 : 8516 29 Electric space-heating apparatus and electric soil-heating apparatus: 8516 29 10 Other: 8517 Telephone sets, including telephones for cellular networks or for other wireless networks; other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network), other than transmission or reception apparatus of heading 8443 , 8525 , 8527 or 8528 : Telephone sets, including telephones for cellular networks or for other wireless networks: 8517 11 00 Line telephone sets with cordless handsets 8517 12 00 Telephones for cellular networks or for other wireless networks: ex 8517 12 00 For cellular networks (mobile telephones) 8517 18 00 Other Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network): 8517 61 Base stations 8517 61 00 Other ex 8517 61 00 Other than for use in civil aircraft 8517 62 00 Machines for the reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus ex 8517 62 00 Other than telephonic or telegraphic switching apparatus 8517 70 Parts: Aerials and aerial reflectors of all kinds; parts suitable for use therewith: 8517 70 11 Aerials for radio-telegraphic or radio-telephonic apparatus: ex 8517 70 11 Other than for use in civil aircraft 8521 Video recording or reproducing apparatus, whether or not incorporating a video tuner: 8521 10 Magnetic tape-type: 8521 10 95 Other: ex 8521 10 95 Other than for use in civil aircraft 8523 Discs, tapes, solid-state non-volatile storage devices, ‘smart cards’ and other media for the recording of sound or of other phenomena, whether or not recorded, including matrices and masters for the production of discs, but excluding products of Chapter 37: Magnetic media: 8523 21 00 Cards incorporating a magnetic stripe 8523 29 Other: Magnetic tapes; magnetic discs: Other: 8523 29 33 For reproducing representations of instructions, data, sound, and image recorded in a machine-readable binary form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data-processing machine: ex 8523 29 33 Of a width exceeding 6,5 mm 8523 29 39 Other: ex 8523 29 39 Of a width exceeding 6,5 mm 8523 40 Optical media: Other: Discs for laser reading systems: 8523 40 25 For reproducing phenomena other than sound or image For reproducing sound only: 8523 40 39 Of a diameter exceeding 6,5 cm Other: Other: 8523 40 51 Digital versatile discs (DVD) 8523 40 59 Other 8525 Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and video camera recorders: 8525 80 Television cameras, digital cameras and video camera recorders: Television cameras: 8525 80 19 Other Video camera recorders: 8525 80 99 Other 8529 Parts suitable for use solely or principally with the apparatus of headings 8525 to 8528 : 8529 10 Aerials and aerial reflectors of all kinds; parts suitable for use therewith: Aerials: Outside aerials for radio or television broadcast receivers: 8529 10 39 Other 8531 Electric sound or visual signalling apparatus (for example, bells, sirens, indicator panels, burglar or fire alarms), other than those of heading 8512 or 8530 : 8531 10 Burglar or fire alarms and similar apparatus: 8531 10 30 Of a kind used for buildings 8531 10 95 Other: ex 8531 10 95 Other than for use in civil aircraft 8531 90 Parts: 8531 90 85 Other 8536 Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables: 8536 90 Other apparatus: 8536 90 10 Connections and contact elements for wire and cables 8543 Electrical machines and apparatus, having individual functions, not specified or included elsewhere in this chapter: 8543 70 Other machines and apparatus: 8543 70 30 Aerial amplifiers Sunbeds, sunlamps and similar suntanning equipment: For fluorescent tubes using ultraviolet A rays: 8543 70 55 Other 8543 70 90 Other ex 8543 70 90 Other than for use in civil aircraft 8544 Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors: Other electric conductors, for a voltage not exceeding 1 000 V: 8544 42 Fitted with connectors: 8544 42 10 Of a kind used for telecommunications: ex 8544 42 10 For a voltage not exceeding 80 V 8544 49 Other: 8544 49 20 Of a kind used for telecommunications, for a voltage not exceeding 80 V 8703 Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading 8702 ), including station wagons and racing cars: 8703 10 Vehicles specially designed for travelling on snow; golf cars and similar vehicles 8703 90 Other 8707 Bodies (including cabs), for the motor vehicles of headings 8701 to 8705 : 8707 10 For the vehicles of heading 8703 : 8707 10 90 Other 8709 Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles 8711 Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars: 8711 20 With reciprocating internal combustion piston engine of a cylinder capacity exceeding 50 cm 3 but not exceeding 250 cm 3 8711 30 With reciprocating internal combustion piston engine of a cylinder capacity exceeding 250 cm 3 but not exceeding 500 cm 3 8711 40 00 With reciprocating internal combustion piston engine of a cylinder capacity exceeding 500 cm 3 but not exceeding 800 cm 3 8716 Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof: Other trailers and semi-trailers for the transport of goods: 8716 39 Other: Other: New: Other: 8716 39 59 Other 8901 Cruise ships, excursion boats, ferry-boats, cargo ships, barges and similar vessels for the transport of persons or goods: 8901 90 Other vessels for the transport of goods and other vessels for the transport of both persons and goods: Other: 8901 90 91 Not mechanically propelled 8901 90 99 Mechanically propelled 8903 Yachts and other vessels for pleasure or sports; rowing boats and canoes: Other: 8903 99 Other: 8903 99 10 Of a weight not exceeding 100 kg each Other: 8903 99 99 Of a length exceeding 7,5 m 9001 Optical fibres and optical fibre bundles; optical fibre cables other than those of heading 8544 ; sheets and plates of polarising material; lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked: 9001 10 Optical fibres, optical fibre bundles and cables: 9001 10 90 Other 9003 Frames and mountings for spectacles, goggles or the like, and parts thereof: Frames and mountings: 9003 11 00 Of plastics 9003 19 Of other materials: 9003 19 30 Of base metal 9003 19 90 Of other materials 9028 Gas, liquid or electricity supply or production meters, including calibrating meters therefor: 9028 90 Parts and accessories: 9028 90 90 Other 9107 00 00 Time switches, with clock or watch movement or with synchronous motor 9401 Seats (other than those of heading 9402 ), whether or not convertible into beds, and parts thereof: 9401 10 00 Seats of a kind used for aircraft: ex 9401 10 00 Other than not leather covered for use in civil aircraft 9405 Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included: 9405 60 Illuminated signs, illuminated nameplates and the like: 9405 60 80 Of other materials: ex 9405 60 80 Other than of base metal for use in civil aircraft Parts: 9405 99 00 Other: ex 9405 99 00 Other than Parts of the articles of subheading 9405 10 or 9405 60 , of base metal, for use in civil aircraft 9406 00 Prefabricated buildings: Other: Of iron or steel: 9406 00 31 Greenhouses 9506 Articles and equipment for general physical exercise, gymnastics, athletics, other sports (including table-tennis) or outdoor games, not specified or included elsewhere in this chapter; swimming pools and paddling pools: Snow-skis and other snow-ski equipment: 9506 11 Skis 9506 12 00 Ski-fastenings (ski-bindings) 9506 19 00 Other Water-skis, surf-bοards, sailboards and other water-sport equipment: 9506 21 00 Sailboards 9506 29 00 Other Golf clubs and other golf equipment: 9506 31 00 Clubs, complete 9506 32 00 Balls 9506 39 Other 9506 40 Articles and equipment for table-tennis Tennis, badminton or similar rackets, whether or not strung: 9506 51 00 Lawn-tennis rackets, whether or not strung 9506 59 00 Other Balls, other than golf balls and table-tennis balls: 9506 61 00 Lawn-tennis balls 9506 62 Inflatable: 9506 62 10 Of leather 9506 69 Other 9506 70 Ice skates and roller skates, including skating boots with skates attached: 9506 70 10 Ice skates 9506 70 90 Parts and accessories Other: 9506 91 Articles and equipment for general physical exercise, gymnastics or athletics 9506 99 Other 9507 Fishing rods, fish-hooks and other line fishing tackle; fish landing nets, butterfly nets and similar nets; decoy ‘birds’(other than those of heading 9208 or 9705 ) and similar hunting or shooting requisites: 9507 30 00 Fishing reels 9606 Buttons, press-fasteners, snap-fasteners and press studs, button moulds and other parts of these articles; button blanks 9607 Slide fasteners and parts thereof 9607 20 Parts: ANNEX I(b) SERBIAN TARIFF CONCESSIONS FOR COMMUNITY INDUSTRIAL PRODUCTS Referred to in Article 21 Duty rates will be reduced as follows: (a) on the date of entry into force of this Agreement, the import duty will be reduced to 80 % of the basic duty; (b) on 1 January of the first year following the date of entry into force of this Agreement, the import duty will be reduced to 60 % of basic duty; (c) on 1 January of the second year following the date of entry into force of this Agreement, the import duty will be reduced to 40 % of basic duty; (d) on 1 January of the third year following the date of entry into force of this Agreement, the import duty will be reduced to 20 % of basic duty; (e) on 1 January of the fourth year following the date of entry into force of this Agreement, the remaining import duties will be abolished. CN code Description 2915 Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives: Acetic acid and its salts; acetic anhydride: 2915 21 00 Acetic acid 2930 Organo-sulphur compounds: 2930 90 Other: 2930 90 85 Other: ex 2930 90 85 Dithiocarbonates (xanthates) 3006 Pharmaceutical goods specified in note 4 to this chapter: 3006 10 Sterile surgical catgut, similar sterile suture materials and sterile tissue adhesives for surgical wound closure; sterile laminaria and sterile laminaria tents; sterile absorbable surgical or dental haemostatics: 3006 10 30 Sterile surgical or dental adhesion barriers, whether or not absorbable: ex 3006 10 30 Plates, sheets, film, foil and strip, of plastics, cellular, other than of polymers of styrene or of polymers of vinyl chloride 3208 Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a nonaqueous medium; solutions as defined in note 4 to this chapter: 3208 20 Based on acrylic or vinyl polymers 3208 90 Other: Solutions as defined in note 4 to this chapter: 3208 90 11 Polyurethane of 2,2′-( tert -butylimino)diethanol and 4,4′-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N -dimethylacetamide, containing by weight 48 % or more of polymer 3208 90 19 Other: ex 3208 90 19 Other than: — varnishes for the electrical insulation based on the polyurethane (PU): 2,2- (tetrabytilamino) diethanol I 4,4 metiylendiciklohexyil diisoyant dissolved in N,N-dimethylacetamide with weight content of solid substances of 20 % or more (max 36 %); — varnishes for the electrical insulation based on the polyestermides (PEI): Copolymer p-cresol and didinylbenzie in the form of solution in N,N-dimethyl-acetamide with weight content of solid substances of 20 % or more (max 40 %); — varnishes for the electrical insulation based on the polyamidimide (PAI): anhidride of trimethyl-di-isocianate acid in the form of solution of N-methilpiralidone with the content of solid substances of 25 % or more (max 40 %) Other: 3208 90 91 Based on synthetic polymers 3208 90 99 Based on chemically modified natural polymers 3209 Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in an aqueous medium 3304 Beauty or make-up preparations and preparations for the care of the skin (other than medicaments), including sunscreen or suntan preparations; manicure or pedicure preparations: Other: 3304 99 00 Other 3305 Preparations for the use on the hair: 3305 10 00 Shampoos 3306 Preparations for oral or dental hygiene, including denture fixative pastes and powders; yarn used to clean between the teeth (dental floss), in individual retail packages: 3306 10 00 Dentifrices 3306 90 00 Other 3307 Pre-shave, shaving or aftershave preparations, personal deodorants, bath preparations, depilatories and other perfumery, cosmetic or toilet preparations, not elsewhere specified or included; prepared room deodorisers, whether or not perfumed or having disinfectant properties: Preparations for perfuming or deodorising rooms, including odoriferous preparations used during religious rites: 3307 41 00 ‘Agarbatti’ and other odoriferous preparations which operate by burning 3401 Soap; organic surface-active products and preparations for use as soap, in the form of bars, cakes, moulded pieces or shapes, whether or not containing soap; organic surface-active products and preparations for washing the skin, in the form of liquid or cream and put up for retail sale, whether or not containing soap; paper, wadding, felt and nonwovens, impregnated, coated or covered with soap or detergent: 3401 20 Soap in other forms 3401 30 00 Organic surface-active products and preparations for washing the skin, in the form of liquid or cream and put up for retail sale, whether or not containing soap 3402 Organic surface-active agents (other than soap); surface-active preparations, washing preparations (including auxiliary washing preparations) and cleaning preparations, whether or not containing soap, other than those of heading 3401 : 3402 20 Preparations put up for retail sale 3402 90 Other: 3402 90 90 Washing preparations and cleaning preparations 3405 Polishes and creams, for footwear, furniture, floors, coachwork, glass or metal, scouring pastes and powders and similar preparations (whether or not in the form of paper, wadding, felt, nonwovens, cellular plastics or cellular rubber, impregnated, coated or covered with such preparations), excluding waxes of heading 3404 3406 00 Candles, tapers and the like 3407 00 00 Modelling pastes, including those put up for children’s amusement; preparations known as ‘dental wax’ or as ‘dental impression compounds’, put up in sets, in packings for retail sale or in plates, horseshoe shapes, sticks or similar forms; other preparations for use in dentistry, with a basis of plaster (of calcined gypsum or calcium sulphate): ex 3407 00 00 Other than preparations for dental use 3506 Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg: 3506 10 00 Products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg Other: 3506 99 00 Other 3604 Fireworks, signalling flares, rain rockets, fog signals and other pyrotechnic articles: 3604 90 00 Other 3606 Ferro-cerium and other pyrophoric alloys in all forms; articles of combustible materials as specified in note 2 to this chapter: 3606 10 00 Liquid or liquefied-gas fuels in containers of a kind used for filling or refilling cigarette or similar lighters and of a capacity not exceeding 300 cm 3 3606 90 Other: 3606 90 90 Other 3808 Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products and plant-growth regulators, disinfectants and similar products, put up in forms or packings for retail sale or as preparations or articles (for example, sulphur-treated bands, wicks and candles, and fly-papers) 3825 Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in note 6 to this chapter: 3825 90 Other: 3825 90 10 Alkaline iron oxide for the purification of gas 3915 Waste, parings and scrap, of plastics 3916 Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics: 3916 10 00 Of polymers of ethylene 3916 20 Of polymers of vinyl chloride: 3916 20 90 Other 3916 90 Of other plastics: Of condensation or rearrangement polymerisation products, whether or not chemically modified: 3916 90 11 Of polyesters 3916 90 13 Of polyamides 3916 90 15 Of epoxide resins 3916 90 19 Other Of addition polymerisation products: 3916 90 51 Of polymers of propylene 3916 90 59 Other 3917 Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics: Tubes, pipes and hoses, rigid: 3917 21 Of polymers of ethylene: 3917 21 10 Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked 3917 21 90 Other: ex 3917 21 90 Other than with fittings attached, for use in civil aircraft 3917 22 Of polymers of propylene: 3917 22 10 Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked 3917 22 90 Other: ex 3917 22 90 Other than with fittings attached, for use in civil aircraft 3917 23 Of polymers of vinyl chloride: 3917 23 10 Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked 3917 23 90 Other: ex 3917 23 90 Other than with fittings attached, for use in civil aircraft 3917 29 Of other plastics Other tubes, pipes and hoses: 3917 32 Other, not reinforced or otherwise combined with other materials, without fittings: Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked: 3917 32 10 Of condensation or rearrangement polymerisation products, whether or not chemically modified Of addition polymerisation products: 3917 32 31 Of polymers of ethylene 3917 32 35 Of polymers of vinyl chloride: ex 3917 32 35 Other than for the dialysator 3917 32 39 Other 3917 32 51 Other Other: 3917 32 99 Other 3917 33 00 Other, not reinforced or otherwise combined with other materials, with fittings: ex 3917 33 00 Other than with fittings attached, for use in civil aircraft 3917 39 Other 3918 Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter 3921 Other plates, sheets, film, foil and strip, of plastics: Cellular: 3921 13 Of polyurethanes 3921 14 00 Of regenerated cellulose 3921 19 00 Of other plastics 3923 Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics: Sacks and bags (including cones): 3923 29 Of other plastics 3923 30 Carboys, bottles, flasks and similar articles 3923 40 Spools, cops, bobbins and similar supports 3923 50 Stoppers, lids, caps and other closures: 3923 50 10 Caps and capsules for bottles 3923 90 Other 3924 Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics: 3924 90 Other 3925 Builders’ ware of plastics, not elsewhere specified or included: 3925 10 00 Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 litres 3925 90 Other 3926 Other articles of plastics and articles of other materials of headings 3901 to 3914 : 3926 30 00 Fittings for furniture, coachwork or the like 3926 40 00 Statuettes and other ornamental articles 3926 90 Other: 3926 90 50 Perforated buckets and similar articles used to filter water at the entrance to drains Other: 3926 90 92 Made from sheet 3926 90 97 Other: ex 3926 90 97 Other than: — hygienic and pharmaceutical products (including teats for the babies); — blanks for the contact lenses 4003 00 00 Reclaimed rubber in primary forms or in plates, sheets or strip 4004 00 00 Waste, parings and scrap of rubber (other than hard rubber) and powders and granules obtained therefrom 4009 Tubes, pipes and hoses, of vulcanised rubber other than hard rubber, with or without their fittings (for example, joints, elbows, flanges): Not reinforced or otherwise combined with other materials: 4009 11 00 Without fittings 4009 12 00 With fittings: ex 4009 12 00 Other than suitable for conducting gases or liquids for use in civil aircraft Reinforced or otherwise combined only with metal: 4009 21 00 Without fittings 4009 22 00 With fittings: ex 4009 22 00 Other than suitable for conducting gases or liquids for use in civil aircraft Reinforced or otherwise combined only with textile materials: 4009 31 00 Without fittings 4009 32 00 With fittings: ex 4009 32 00 Other than suitable for conducting gases or liquids for use in civil aircraft Reinforced or otherwise combined with other materials: 4009 41 00 Without fittings 4009 42 00 With fittings: ex 4009 42 00 Other than suitable for conducting gases or liquids for use in civil aircraft 4010 Conveyor or transmission belts or belting, of vulcanised rubber: Conveyor belts or belting: 4010 12 00 Reinforced only with textile materials 4010 19 00 Other Transmission belts or belting: 4010 31 00 Endless transmission belts of trapezoidal cross-section (V-belts), V-ribbed, of an outside circumference exceeding 60 cm but not exceeding 180 cm 4010 32 00 Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, of an outside circumference exceeding 60 cm but not exceeding 180 cm 4010 33 00 Endless transmission belts of trapezoidal cross-section (V-belts), V-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm 4010 34 00 Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm 4010 35 00 Endless synchronous belts, of an outside circumference exceeding 60 cm but not exceeding 150 cm 4010 36 00 Endless synchronous belts, of an outside circumference exceeding 150 cm but not exceeding 198 cm 4010 39 00 Other 4011 New pneumatic tyres, of rubber: 4011 10 00 Of a kind used on motor cars (including station wagons and racing cars) 4011 20 Of a kind used on buses or lorries: 4011 20 90 With a load index exceeding 121 ex 4011 20 90 Having a rim size not exceeding 61 cm 4011 40 Of a kind used on motorcycles 4011 50 00 Of a kind used on bicycles Other, having a ‘herring-bone’ or similar tread: 4011 69 00 Other Other: 4011 99 00 Other 4013 Inner tubes, of rubber: 4013 10 Of a kind used on motor cars (including station wagons and racing cars), buses or lorries: 4013 10 90 Of the kind used on buses or lorries 4013 20 00 Of a kind used on bicycles 4013 90 00 Other 4015 Articles of apparel and clothing accessories (including gloves, mittens and mitts), for all purposes, of vulcanised rubber other than hard rubber: Gloves, mittens and mitts: 4015 19 Other 4015 90 00 Other 4016 Other articles of vulcanised rubber other than hard rubber: Other: 4016 91 00 Floor coverings and mats 4016 92 00 Erasers 4016 93 00 Gaskets, washers and other seals: ex 4016 93 00 Other than for technical uses, for use in civil aircraft 4016 95 00 Other inflatable articles 4016 99 Other: 4016 99 20 Expander sleeves: ex 4016 99 20 Other than for technical uses, for use in civil aircraft Other: For motor vehicles of headings 8701 to 8705 : 4016 99 52 Rubber-to-metal bonded parts 4016 99 58 Other Other: 4016 99 91 Rubber-to-metal bonded parts: ex 4016 99 91 Other than for technical uses, for use in civil aircraft 4016 99 99 Other: ex 4016 99 99 Other than for technical uses, for use in civil aircraft 4017 00 Hard rubber (for example, ebonite) in all forms, including waste and scrap; articles of hard rubber 4201 00 00 Saddlery and harness for any animal (including traces, leads, knee pads, muzzles, saddle-cloths, saddlebags, dog coats and the like), of any material 4203 Articles of apparel and clothing accessories, of leather or of composition leather 4302 Tanned or dressed furskins (including heads, tails, paws and other pieces or cuttings), unassembled, or assembled (without the addition of other materials) other than those of heading 4303 4303 Articles of apparel, clothing accessories and other articles of furskin 4304 00 00 Artificial fur and articles thereof: ex 4304 00 00 Articles of the artificial fur 4410 Particle board, oriented strand board (OSB) and similar board (for example, waferboard) of wood or other ligneous materials, whether or not agglomerated with resins or other organic binding substances: Of wood: 4410 11 Particle board: 4410 11 10 Unworked or not further worked than sanded 4410 11 30 Surface-covered with melamine-impregnated paper 4410 11 50 Surface-covered with decorative laminates of plastics 4410 11 90 Other 4410 19 00 Other ex 4410 19 00 Other than waferboard 4410 90 00 Other 4411 Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances: Medium density fibreboard (MDF): 4411 12 Of a thickness not exceeding 5 mm: 4411 12 10 Not mechanically worked or surface covered: ex 4411 12 10 Of a density exceeding 0,8 g/cm 3 4411 12 90 Other: ex 4411 12 90 Of a density exceeding 0,8 g/cm 3 4411 13 Of a thickness exceeding 5 mm but not exceeding 9 mm: 4411 13 10 Not mechanically worked or surface covered: ex 4411 13 10 Of a density exceeding 0,8 g/cm 3 4411 13 90 Other: ex 4411 13 90 Of a density exceeding 0,8 g/cm 3 4411 14 Of a thickness exceeding 9 mm: 4411 14 10 Not mechanically worked or surface covered: ex 4411 14 10 Of a density exceeding 0,8 g/cm 3 4411 14 90 Other: ex 4411 14 90 Of a density exceeding 0,8 g/cm 3 Other: 4411 92 Of a density exceeding 0,8 g/cm 3 4412 Plywood, veneered panels and similar laminated wood: 4412 10 00 Of bamboo: ex 4412 10 00 Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: 4412 32 00 Other, with at least one outer ply of non-coniferous wood 4412 39 00 Other 4414 00 Wooden frames for paintings, photographs, mirrors or similar objects: 4414 00 10 Of tropical wood, as specified in additional note 2 to this chapter 4418 Builders’ joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes: 4418 40 00 Shuttering for concrete constructional work 4418 60 00 Posts and beams 4418 90 Other: 4418 90 10 Glue-laminated timber 4418 90 80 Other 4421 Other articles of wood: 4421 10 00 Clothes hangers 4421 90 Other: 4421 90 91 Of fibreboard 4602 Basketwork, wickerwork and other articles, made directly to shape from plaiting materials or made up from goods of heading 4601 ; articles of loofah: Of vegetable materials: 4602 11 00 Of bamboo: ex 4602 11 00 Basketwork, wickerwork and other articles, made directly to shape 4602 12 00 Of rattan: ex 4602 12 00 Basketwork, wickerwork and other articles, made directly to shape 4602 19 Other: Other: 4602 19 91 Basketwork, wickerwork and other articles, made directly to shape from plaiting materials 4808 Paper and paperboard, corrugated (with or without glued flat surface sheets), creped, crinkled, embossed or perforated, in rolls or sheets, other than paper of the kind described in heading 4803 : 4808 10 00 Corrugated paper and paperboard, whether or not perforated 4814 Wallpaper and similar wallcoverings; window transparencies of paper 4818 Toilet paper and similar paper, cellulose wadding or webs of cellulose fibres, of a kind used for household or sanitary purposes, in rolls of a width not exceeding 36 cm, or cut to size or shape; handkerchiefs, cleansing tissues, towels, tablecloths, serviettes, napkins for babies, tampons, bedsheets and similar household, sanitary or hospital articles, articles of apparel and clothing accessories, of paper pulp, paper, cellulose wadding or webs of cellulose fibres: 4818 30 00 Tablecloths and serviettes 4818 90 Other 4821 Paper or paperboard labels of all kinds, whether or not printed: 4821 90 Other 4823 Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape; other articles of paper pulp, paper, paperboard, cellulose wadding or webs of cellulose fibres: 4823 70 Moulded or pressed articles of paper pulp 4907 00 Unused postage, revenue or similar stamps of current or new issue in the country in which they have, or will have, a recognised face value; stamp-impressed paper; banknotes; cheque forms; stock, share or bond certificates and similar documents of title 4909 00 Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmings: 4909 00 10 Printed or illustrated postcards 4911 Other printed matter, including printed pictures and photographs: Other: 4911 91 00 Pictures, designs and photographs 6401 Waterproof footwear with outer soles and uppers of rubber or of plastics, the uppers of which are neither fixed to the sole nor assembled by stitching, riveting, nailing, screwing, plugging or similar processes: 6401 10 Footwear incorporating a protective metal toecap Other footwear: 6401 92 Covering the ankle but not covering the knee 6401 99 00 Other: ex 6401 99 00 Other than covering the knee 6402 Other footwear with outer soles and uppers of rubber or plastics: Sports footwear: 6402 12 Ski-boots, cross-country ski footwear and snowboard boots 6402 19 00 Other 6403 Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of leather: Sports footwear: 6403 12 00 Ski-boots, cross-country ski footwear and snowboard boots 6403 19 00 Other 6403 20 00 Footwear with outer soles of leather, and uppers which consist of leather straps across the instep and around the big toe Other footwear with outer soles of leather: 6403 59 Other: Other: Footwear with a vamp made of straps or which has one or several pieces cut out: 6403 59 11 With sole and heel combined having a height of more than 3 cm Other, with insoles of a length: 6403 59 31 Of less than 24 cm Of 24 cm or more: 6403 59 35 For men 6403 59 39 For women 6403 59 50 Slippers and other indoor footwear Other, with insoles of a length: 6403 59 91 Of less than 24 cm Of 24 cm or more: 6403 59 95 For men 6403 59 99 For women 6404 Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of textile materials 6406 Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable insoles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof 6506 Other headgear, whether or not lined or trimmed: 6506 10 Safety headgear: 6506 10 10 Of plastics 6602 00 00 Walking sticks, seat-sticks, whips, riding-crops and the like 6603 Parts, trimmings and accessories of articles of heading 6601 or 6602 : 6603 90 Other: 6603 90 90 Other 6701 00 00 Skins and other parts of birds with their feathers or down, feathers, parts of feathers, down and articles thereof (other than goods of heading 0505 and worked quills and scapes) 6801 00 00 Setts, curbstones and flagstones, of natural stone (except slate) 6802 Worked monumental or building stone (except slate) and articles thereof, other than goods of heading 6801 ; mosaic cubes and the like, of natural stone (including slate), whether or not on a backing; artificially coloured granules, chippings and powder, of natural stone (including slate) 6803 00 Worked slate and articles of slate or of agglomerated slate 6806 Slag-wool, rock-wool and similar mineral wools; exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials; mixtures and articles of heat-insulating, sound-insulating or sound-absorbing mineral materials, other than those of heading 6811 or 6812 or of Chapter 69: 6806 20 Exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials (including intermixtures thereof) 6806 90 00 Other 6810 Articles of cement, of concrete or of artificial stone, whether or not reinforced 6813 Friction material and articles thereof (for example, sheets, rolls, strips, segments, discs, washers, pads), not mounted, for brakes, for clutches or the like, with a basis of asbestos, of other mineral substances or of cellulose, whether or not combined with textile or other materials: 6813 20 00 Containing asbestos: ex 6813 20 00 Brake linings and pads, other than for use in civil aircraft Not containing asbestos: 6813 81 00 Brake linings and pads: ex 6813 81 00 Other than for use in civil aircraft 6815 Articles of stone or of other mineral substances (including carbon fibres, articles of carbon fibres and articles of peat), not elsewhere specified or included: Other articles: 6815 91 00 Containing magnesite, dolomite or chromite 6815 99 Other: 6815 99 10 Of refractory materials, chemically bonded 6815 99 90 Other 6902 Refractory bricks, blocks, tiles and similar refractory ceramic constructional goods, other than those of siliceous fossil meals or similar siliceous earths: 6902 90 00 Other: ex 6902 90 00 Other than based on carbon or circone 6904 Ceramic building bricks, flooring blocks, support or filler tiles and the like 6905 Roofing tiles, chimney pots, cowls, chimney liners, architectural ornaments and other ceramic constructional goods 6906 00 00 Ceramic pipes, conduits, guttering and pipe fittings 6908 Glazed ceramic flags and paving, hearth or wall tiles; glazed ceramic mosaic cubes and the like, whether or not on a backing: 6908 90 Other: Other: Other: Other: 6908 90 99 Other 6909 Ceramic wares for laboratory, chemical or other technical uses; ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods: Ceramic wares for laboratory, chemical or other technical uses: 6909 12 00 Articles having a hardness equivalent to 9 or more on the Mohs scale 6909 19 00 Other 6909 90 00 Other 6911 Tableware, kitchenware, other household articles and toilet articles, of porcelain or china: 6911 90 00 Other 6912 00 Ceramic tableware, kitchenware, other household articles and toilet articles, other than of porcelain or china 6913 Statuettes and other ornamental ceramic articles 6914 Other ceramic articles: 6914 90 Other 7007 Safety glass, consisting of toughened (tempered) or laminated glass: Toughened (tempered) safety glass: 7007 11 Of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels 7007 19 Other: 7007 19 20 Coloured throughout the mass (body tinted), opacified, flashed or having an absorbent or reflecting layer 7007 19 80 Other Laminated safety glass: 7007 21 Of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels: 7007 21 20 Of size and shape suitable for incorporation in motor vehicles 7007 21 80 Other: ex 7007 21 80 Other than windshields, not framed, for use in civil aircraft 7007 29 00 Other 7008 00 Multiple-walled insulating units of glass 7009 Glass mirrors, whether or not framed, including rear-view mirrors: 7009 10 00 Rear-view mirrors for vehicles 7010 Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass: 7010 90 Other: Other: Other, of a nominal capacity of: Less than 2,5 l: For beverages and foodstuffs: Bottles: Of colourless glass, of a nominal capacity of: 7010 90 45 0,15 l or more but not more than 0,33 l Of coloured glass, of a nominal capacity of: 7010 90 53 More than 0,33 l but less than 1 l 7010 90 55 0,15 l or more but not more than 0,33 l 7011 Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for electric lamps, cathode ray tubes or the like: 7011 90 00 Other 7014 00 00 Signalling glassware and optical elements of glass (other than those of heading 7015 ), not optically worked 7015 Clock or watch glasses and similar glasses, glasses for non-corrective or corrective spectacles, curved, bent, hollowed or the like, not optically worked; hollow glass spheres and their segments, for the manufacture of such glasses: 7015 90 00 Other 7016 Paving blocks, slabs, bricks, squares, tiles and other articles of pressed or moulded glass, whether or not wired, of a kind used for building or construction purposes; glass cubes and other glass smallwares, whether or not on a backing, for mosaics or similar decorative purposes; leaded lights and the like; multicellular or foam glass in blocks, panels, plates, shells or similar forms: 7016 10 00 Glass cubes and other glass smallwares, whether or not on a backing, for mosaics or similar decorative purposes 7018 Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares, and articles thereof other than imitation jewellery; glass eyes other than prosthetic articles; statuettes and other ornaments of lamp-worked glass, other than imitation jewellery; glass microspheres not exceeding 1 mm in diameter: 7018 10 Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares 7018 20 00 Glass microspheres not exceeding 1 mm in diameter 7018 90 Other: 7018 90 90 Other 7019 Glass fibres (including glass wool) and articles thereof (for example, yarn, woven fabrics): Slivers, rovings, yarn and chopped strands: 7019 11 00 Chopped strands, of a length of not more than 50 mm Thin sheets (voiles), webs, mats, mattresses, boards and similar non-woven products: 7019 39 00 Other 7019 40 00 Woven fabrics of rovings Other woven fabrics: 7019 52 00 Of a width exceeding 30 cm, plain weave, weighing less than 250 g/m 2 , of filaments measuring per single yarn not more than 136 tex 7019 59 00 Other 7020 00 Other articles of glass: 7020 00 05 Quartz reactor tubes and holders designed for insertion into diffusion and oxidation furnaces for production of semiconductor materials Other: 7020 00 10 Of fused quartz or other fused silica 7020 00 30 Of glass having a linear coefficient of expansion not exceeding 5 × 10 –6 per Kelvin within a temperature range of 0 °C to 300 °C 7020 00 80 Other 7117 Imitation jewellery: Of base metal, whether or not plated with precious metal: 7117 19 Other: 7117 19 10 With parts of glass Without parts of glass: 7117 19 99 Other 7117 90 00 Other 7208 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hotrolled, not clad, plated or coated: Other, in coils, not further worked than hot-rolled: 7208 39 00 Of a thickness of less than 3 mm 7216 Angles, shapes and sections of iron or non-alloy steel: Other: 7216 91 Cold-formed or cold-finished from flat-rolled products 7216 99 00 Other 7217 Wire of iron or non-alloy steel: 7217 10 Not plated or coated, whether or not polished: Containing by weight less than 0,25 % of carbon: With a maximum cross-sectional dimension of 0,8 mm or more: 7217 10 39 Other 7217 20 Plated or coated with zinc: Containing by weight less than 0,25 % of carbon: 7217 20 30 With a maximum cross-sectional dimension of 0,8 mm or more 7217 20 50 Containing by weight 0,25 % or more but less than 0,6 % of carbon 7302 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails: 7302 40 00 Fish-plates and sole plates 7302 90 00 Other 7310 Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment: 7312 Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated: 7312 10 Stranded wire, ropes and cables: 7312 10 20 Of stainless steel: ex 7312 10 20 Other than with fittings attached, or made up into articles, for use in civil aircraft Other, with a maximum cross-sectional dimension: Not exceeding 3 mm: 7312 10 49 Other: ex 7312 10 49 Other than with fittings attached, or made up into articles, for use in civil aircraft Exceeding 3 mm: Stranded wire: 7312 10 61 Not coated: ex 7312 10 61 Other than with fittings attached, or made up into articles, for use in civil aircraft Coated: 7312 10 65 Plated or coated with zinc: ex 7312 10 65 Other than with fittings attached, or made up into articles, for use in civil aircraft 7312 10 69 Other: ex 7312 10 69 Other than with fittings attached, or made up into articles, for use in civil aircraft 7312 90 00 Other ex 7312 90 00 Other than with fittings attached, or made up into articles, for use in civil aircraft 7314 Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel: 7314 20 Grill, netting and fencing, welded at the intersection, of wire with a maximum crosssectional dimension of 3 mm or more and having a mesh size of 100 cm 2 or more Other grill, netting and fencing, welded at the intersection: 7314 39 00 Other 7317 00 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305 ) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel 7320 Springs and leaves for springs, of iron or steel 7321 Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel: Other appliances: 7321 89 00 Other, including appliances for solid fuel: ex 7321 89 00 For solid fuel 7322 Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot-air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motordriven fan or blower, and parts thereof, of iron or steel: Radiators and parts thereof: 7322 11 00 Of cast iron 7322 19 00 Other 7323 Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel: Other: 7323 91 00 Of cast iron, not enamelled 7323 93 Of stainless steel 7323 94 Of iron (other than cast iron) or steel, enamelled: 7323 94 10 Articles for table use 7323 99 Other: 7323 99 10 Articles for table use Other: 7323 99 99 Other 7324 Sanitary ware and parts thereof, of iron or steel: Baths: 7324 21 00 Of cast iron, whether or not enamelled 7324 90 00 Other, including parts: ex 7324 90 00 Other than sanitary ware (excluding parts thereof), for use in civil aircraft 7325 Other cast articles of iron or steel 7326 Other articles of iron or steel 7403 Refined copper and copper alloys, unwrought: Copper alloys: 7403 21 00 Copper-zinc base alloys (brass) 7407 Copper bars, rods and profiles: Of copper alloys: 7407 29 Other 7408 Copper wire: Of refined copper: 7408 19 Other Of copper alloys: 7408 22 00 Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) 7410 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15 mm: Not backed: 7410 11 00 Of refined copper 7418 Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper: 7418 20 00 Sanitary ware and parts thereof 7419 Other articles of copper: Other: 7419 99 Other: 7419 99 90 Other 7604 Aluminium bars, rods and profiles: Of aluminium alloys: 7604 29 Other: 7604 29 10 Bars and rods 7605 Aluminium wire: Of aluminium, not alloyed: 7605 19 00 Other Of aluminium alloys: 7605 21 00 Of which the maximum cross-sectional dimension exceeds 7 mm 7605 29 00 Other 7608 Aluminium tubes and pipes: 7608 20 Of aluminium alloys: Other: 7608 20 81 Not further worked than extruded: ex 7608 20 81 Other than with attached fittings, suitable for conducting gases or liquids, for use in civil aircraft 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heatinsulated, but not fitted with mechanical or thermal equipment 7613 00 00 Aluminium containers for compressed or liquefied gas 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 7615 Table, kitchen or other household articles and parts thereof, of aluminium; pot scourers and scouring or polishing pads, gloves and the like, of aluminium; sanitary ware and parts thereof, of aluminium 7616 Other articles of aluminium 8201 Hand tools, the following: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, billhooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry 8202 Handsaws; blades for saws of all kinds (including slitting, slotting or toothless saw blades): 8202 10 00 Handsaws 8205 Hand tools (including glaziers’ diamonds), not elsewhere specified or included; blowlamps; vices, clamps and the like, other than accessories for and parts of machine tools; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks 8206 00 00 Tools of two or more of headings 8202 to 8205 , put up in sets for retail sale 8207 Interchangeable tools for hand tools, whether or not power-operated, or for machine tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock-drilling or earth-boring tools: Rock-drilling or earth-boring tools: 8207 13 00 With working part of cermets 8207 19 Other, including parts: 8207 19 90 Other 8207 30 Tools for pressing, stamping or punching 8207 40 Tools for tapping or threading 8207 50 Tools for drilling, other than for rock-drilling 8207 60 Tools for boring or broaching 8207 70 Tools for milling 8207 80 Tools for turning 8207 90 Other interchangeable tools: With working part of other materials: 8207 90 30 Screwdriver bits 8207 90 50 Gear-cutting tools Other, with working part: Of cermets: 8207 90 71 For working metal 8207 90 78 Other Of other materials: 8207 90 91 For working metal 8207 90 99 Other 8208 Knives and cutting blades, for machines or for mechanical appliances 8209 00 Plates, sticks, tips and the like for tools, unmounted, of cermets 8211 Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208 , and blades therefor: 8211 10 00 Sets of assorted articles Other: 8211 91 Table knives having fixed blades 8211 92 00 Other knives having fixed blades 8211 93 00 Knives having other than fixed blades 8211 94 00 Blades 8212 Razors and razor blades (including razor blade blanks in strips) 8213 00 00 Scissors, tailors’ shears and similar shears, and blades therefor 8214 Other articles of cutlery (for example, hair clippers, butchers’ or kitchen cleavers, choppers and mincing knives, paperknives); manicure or pedicure sets and instruments (including nail files) 8215 Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware: 8215 10 Sets of assorted articles containing at least one article plated with precious metal 8215 20 Other sets of assorted articles Other: 8215 99 Other 8301 Padlocks and locks (key, combination or electrically operated), of base metal; clasps and frames with clasps, incorporating locks, of base metal; keys for any of the foregoing articles, of base metal: 8301 10 00 Padlocks 8301 30 00 Locks of a kind used for furniture 8301 40 Other locks 8301 50 00 Clasps and frames with clasps, incorporating locks 8301 60 00 Parts 8301 70 00 Keys presented separately 8302 Base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal: 8302 30 00 Other mountings, fittings and similar articles suitable for motor vehicles Other mountings, fittings and similar articles: 8302 41 00 Suitable for buildings 8305 Fittings for loose-leaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal: 8305 20 00 Staples in strips 8305 90 00 Other, including parts 8307 Flexible tubing of base metal, with or without fittings: 8307 10 00 Of iron or steel: ex 8307 10 00 Other than with fittings attached, for use in civil aircraft 8309 Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal: 8309 10 00 Crown corks 8311 Wire, rods, tubes, plates, electrodes and similar products, of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying: 8311 10 Coated electrodes of base metal, for electric arc-welding: 8311 20 00 Cored wire of base metal, for electric arc-welding 8402 Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); superheated water boilers: Steam or other vapour generating boilers: 8402 11 00 Watertube boilers with a steam production exceeding 45 tonnes per hour 8402 12 00 Watertube boilers with a steam production not exceeding 45 tonnes per hour 8402 19 Other vapour generating boilers, including hybrid boilers: 8402 20 00 Superheated water boilers 8403 Central heating boilers other than those of heading 8402 8404 Auxiliary plant for use with boilers of heading 8402 or 8403 (for example, economisers, superheaters, soot removers, gas recoverers); condensers for steam or other vapour power units: 8404 10 00 Auxiliary plant for use with boilers of heading 8402 or 8403 8404 20 00 Condensers for steam or other vapour power units 8407 Spark-ignition reciprocating or rotary internal combustion piston engines: Reciprocating piston engines of a kind used for the propulsion of vehicles of Chapter 87: 8407 31 00 Of a cylinder capacity not exceeding 50 cm 3 8407 32 Of a cylinder capacity exceeding 50 cm 3 but not exceeding 250 cm 3 : 8407 33 Of a cylinder capacity exceeding 250 cm 3 but not exceeding 1 000 cm 3 : 8407 33 90 Other 8407 34 Of a cylinder capacity exceeding 1 000 cm 3 : 8407 34 10 For the industrial assembly of: — pedestrian-controlled tractors of subheading 8701 10 ; — motor vehicles of heading 8703 ; — motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 800 cm 3 ; — motor vehicles of heading 8705 : ex 8407 34 10 Other than motor vehicles of heading 8703 Other: New, of a cylinder capacity: 8407 34 91 Not exceeding 1 500 cm 3 8407 34 99 Exceeding 1 500 cm 3 8407 90 Other engines 8408 Compression-ignition internal combustion piston engines (diesel or semi-diesel engines): 8408 20 Engines of a kind used for the propulsion of vehicles of Chapter 87: Other: For wheeled agricultural or forestry tractors, of a power: 8408 20 31 Not exceeding 50 kW 8408 20 35 Exceeding 50 kW but not exceeding 100 kW For other vehicles of Chapter 87, of a power: 8408 20 51 Not exceeding 50 kW 8408 20 55 Exceeding 50 kW but not exceeding 100 kW: ex 8408 20 55 Other than for the industrial assembly 8408 90 Other engines: Other: New, of a power: 8408 90 41 Not exceeding 15 kW: ex 8408 90 41 Other than for use in civil aircraft 8408 90 43 Exceeding 15 kW but not exceeding 30 kW: ex 8408 90 43 Other than for use in civil aircraft 8408 90 45 Exceeding 30 kW but not exceeding 50 kW: ex 8408 90 45 Other than for use in civil aircraft 8408 90 47 Exceeding 50 kW but not exceeding 100 kW: ex 8408 90 47 Other than for use in civil aircraft 8412 Other engines and motors: Hydraulic power engines and motors: 8412 21 Linear acting (cylinders): 8412 21 20 Hydraulic systems: ex 8412 21 20 Other than for use in civil aircraft 8412 21 80 Other: ex 8412 21 80 Other than for use in civil aircraft 8412 29 Other: 8412 29 20 Hydraulic systems: ex 8412 29 20 Other than for use in civil aircraft Other: 8412 29 81 Hydraulic fluid power motors: ex 8412 29 81 Other than for use in civil aircraft 8412 29 89 Other: ex 8412 29 89 Other than for use in civil aircraft Pneumatic power engines and motors: 8412 31 00 Linear acting (cylinders): ex 8412 31 00 Other than for use in civil aircraft 8412 39 00 Other: ex 8412 39 00 Other than for use in civil aircraft 8412 80 Other: 8412 80 10 Steam or other vapour power engines 8412 80 80 Other: ex 8412 80 80 Other than for use in civil aircraft 8412 90 Parts: 8412 90 20 Of reaction engines other than turbojets: ex 8412 90 20 Other than for use in civil aircraft 8412 90 40 Of hydraulic power engines and motors: ex 8412 90 40 Other than for use in civil aircraft 8412 90 80 Other: ex 8412 90 80 Other than for use in civil aircraft 8413 Pumps for liquids, whether or not fitted with a measuring device; liquid elevators: Pumps fitted or designed to be fitted with a measuring device: 8413 11 00 Pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages 8413 19 00 Other: ex 8413 19 00 Other than for use in civil aircraft 8413 20 00 Handpumps, other than those of subheading 8413 11 or 8413 19 : ex 8413 20 00 Other than for use in civil aircraft 8413 30 Fuel, lubricating or cooling medium pumps for internal combustion piston engines: 8413 30 80 Other: ex 8413 30 80 Other than for use in civil aircraft 8413 40 00 Concrete pumps 8413 50 Other reciprocating positive displacement pumps: 8413 50 20 Hydraulic units: ex 8413 50 20 Other than for use in civil aircraft 8413 50 40 Dosing and proportioning pumps: ex 8413 50 40 Other than for use in civil aircraft Other: Piston pumps: 8413 50 61 Hydraulic fluid power: ex 8413 50 61 Other than for use in civil aircraft 8413 50 69 Other: ex 8413 50 69 Other than piston-membrane of a capacity exceeding 15 l/s and other than for use in civil aircraft 8413 50 80 Other: ex 8413 50 80 Other than for use in civil aircraft 8413 60 Other rotary positive displacement pumps: 8413 60 20 Hydraulic units: ex 8413 60 20 Other than for use in civil aircraft Other: Gear pumps: 8413 60 31 Hydraulic fluid power: ex 8413 60 31 Other than for use in civil aircraft 8413 60 39 Other: ex 8413 60 39 Other than for use in civil aircraft Vane pumps: 8413 60 61 Hydraulic fluid power: ex 8413 60 61 Other than for use in civil aircraft 8413 60 69 Other: ex 8413 60 69 Other than for use in civil aircraft 8413 60 70 Screw pumps: ex 8413 60 70 Other than for use in civil aircraft 8413 60 80 Other: ex 8413 60 80 Other than for use in civil aircraft 8413 70 Other centrifugal pumps: Submersible pumps: 8413 70 21 Single-stage 8413 70 29 Multi-stage 8413 70 30 Glandless impeller pumps for heating systems and warm water supply Other, with a discharge outlet diameter: 8413 70 35 Not exceeding 15 mm: ex 8413 70 35 Other than for use in civil aircraft Exceeding 15 mm: 8413 70 45 Channel impeller pumps and side channel pumps: ex 8413 70 45 Other than for use in civil aircraft Radial flow pumps: Single-stage: With single entry impeller: 8413 70 51 Monobloc: ex 8413 70 51 Other than for use in civil aircraft 8413 70 59 Other: ex 8413 70 59 Other than for use in civil aircraft 8413 70 65 With more than one entry impeller: ex 8413 70 65 Other than for use in civil aircraft 8413 70 75 Multi-stage: ex 8413 70 75 Other than for use in civil aircraft Other centrifugal pumps: 8413 70 81 Single-stage: ex 8413 70 81 Other than for use in civil aircraft 8413 70 89 Multi-stage: ex 8413 70 89 Other than for use in civil aircraft Other pumps; liquid elevators: 8413 81 00 Pumps: ex 8413 81 00 Other than for use in civil aircraft 8413 82 00 Liquid elevators Parts: 8413 91 00 Of pumps: ex 8413 91 00 Other than for use in civil aircraft 8413 92 00 Of liquid elevators 8414 Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters: 8414 30 Compressors of a kind used in refrigerating equipment: 8414 30 20 Of a power not exceeding 0,4 kW: ex 8414 30 20 Other than for use in civil aircraft Of a power exceeding 0,4 kW: 8414 30 89 Other: ex 8414 30 89 Other than for use in civil aircraft 8414 40 Air compressors mounted on a wheeled chassis for towing Fans: 8414 51 00 Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W: ex 8414 51 00 Other than for use in civil aircraft 8414 59 Other: 8414 59 20 Axial fans: ex 8414 59 20 Other than for use in civil aircraft 8414 59 40 Centrifugal fans: ex 8414 59 40 Other than for use in civil aircraft 8414 59 80 Other: ex 8414 59 80 Other than for use in civil aircraft 8414 60 00 Hoods having a maximum horizontal side not exceeding 120 cm 8414 80 Other: Turbo-compressors: 8414 80 11 Single-stage: ex 8414 80 11 Other than for use in civil aircraft 8414 80 19 Multi-stage: ex 8414 80 19 Other than for use in civil aircraft Reciprocating displacement compressors, having a gauge pressure capacity of: Not exceeding 15 bar, giving a flow per hour: 8414 80 22 Not exceeding 60 m 3 ex 8414 80 22 Other than for use in civil aircraft 8414 80 28 Exceeding 60 m 3 ex 8414 80 28 Other than for use in civil aircraft Exceeding 15 bar, giving a flow per hour: 8414 80 51 Not exceeding 120 m 3 ex 8414 80 51 Other than for use in civil aircraft 8414 80 59 Exceeding 120 m 3 ex 8414 80 59 Other than for use in civil aircraft Rotary displacement compressors: 8414 80 73 Single-shaft: ex 8414 80 73 Other than for use in civil aircraft Multi-shaft: 8414 80 75 Screw compressors: ex 8414 80 75 Other than for use in civil aircraft 8414 80 78 Other: ex 8414 80 78 Other than for use in civil aircraft 8414 80 80 Other: ex 8414 80 80 Other than for use in civil aircraft 8416 Furnace burners for liquid fuel, for pulverised solid fuel or for gas; mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances: 8416 10 Furnace burners for liquid fuel 8416 30 00 Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances 8417 Industrial or laboratory furnaces and ovens, including incinerators, non-electric: 8417 20 Bakery ovens, including biscuit ovens 8417 80 Other: 8417 80 20 Tunnel ovens and muffle furnaces for firing ceramic products 8417 80 80 Other 8418 Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air-conditioning machines of heading 8415 : Refrigerators, household type: 8418 21 Compression-type: 8418 21 10 Of a capacity exceeding 340 litres Other: Other, of a capacity: 8418 21 91 Not exceeding 250 litres 8418 21 99 Exceeding 250 litres but not exceeding 340 litres 8418 29 00 Other ex 8418 29 00 Other than absorption-type, electrical 8418 30 Freezers of the chest type, not exceeding 800 litres capacity: 8418 30 20 Of a capacity not exceeding 400 litres: ex 8418 30 20 Other than for use in civil aircraft 8418 30 80 Of a capacity exceeding 400 litres but not exceeding 800 litres: ex 8418 30 80 Other than for use in civil aircraft 8418 40 Freezers of the upright type, not exceeding 900 litres capacity: 8418 40 20 Of a capacity not exceeding 250 litres: ex 8418 40 20 Other than for use in civil aircraft 8418 40 80 Of a capacity exceeding 250 litres but not exceeding 900 litres: ex 8418 40 80 Other than for use in civil aircraft 8418 50 Other furniture (chests, cabinets, display counters, showcases and the like) for storage and display, incorporating refrigerating or freezing equipment: Refrigerated showcases and counters (incorporating a refrigerating unit or evaporator): 8418 50 19 Other Other refrigerating furniture: 8418 50 91 For deep-freezing, other than that of subheadings 8418 30 and 8418 40 8418 50 99 Other Other refrigerating or freezing equipment; heat pumps: 8418 61 00 Heat pumps other than air conditioning machines of heading 8415 : ex 8418 61 00 Other than for use in civil aircraft 8418 69 00 Other: ex 8418 69 00 Other than absorption heat pumps and other than for use in civil aircraft Parts: 8418 91 00 Furniture designed to receive refrigerating or freezing equipment 8419 Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514 ), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, nonelectric: Instantaneous or storage water heaters, non-electric: 8419 11 00 Instantaneous gas water heaters 8419 19 00 Other Dryers: 8419 31 00 For agricultural products 8419 39 Other Other machinery, plant and equipment: 8419 81 For making hot drinks or for cooking or heating food: 8419 81 20 Percolators and other appliances for making coffee and other hot drinks: ex 8419 81 20 Other than for use in civil aircraft 8419 81 80 Other: ex 8419 81 80 Other than for use in civil aircraft 8421 Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases: Filtering or purifying machinery and apparatus for gases: 8421 39 Other: 8421 39 20 Machinery and apparatus for filtering or purifying air: ex 8421 39 20 Other than for use in civil aircraft Machinery and apparatus for filtering or purifying other gases: 8421 39 40 By a liquid process: ex 8421 39 40 Other than for use in civil aircraft 8421 39 90 Other: ex 8421 39 90 Other than for use in civil aircraft 8422 Dishwashing machines; machinery for cleaning or drying bottles or other containers; machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; other packing or wrapping machinery (including heat-shrink wrapping machinery); machinery for aerating beverages: Dishwashing machines: 8422 11 00 Of the household type 8422 19 00 Other 8423 Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight-operated counting or checking machines; weighing machine weights of all kinds: 8423 10 Personal weighing machines, including baby scales; household scales 8423 30 00 Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales Other weighing machinery: 8423 81 Having a maximum weighing capacity not exceeding 30 kg 8423 82 Having a maximum weighing capacity exceeding 30 kg but not exceeding 5 000 kg 8423 89 00 Other 8424 Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sandblasting machines and similar jet projecting machines: 8424 10 Fire extinguishers, whether or not charged: 8424 10 20 Of a weight not exceeding 21 kg: ex 8424 10 20 Other than for use in civil aircraft 8424 10 80 Other: ex 8424 10 80 Other than for use in civil aircraft 8425 Pulley tackle and hoists other than skip hoists; winches and capstans; jacks: Other winches; capstans: 8425 31 00 Powered by electric motor: ex 8425 31 00 Other than for use in civil aircraft 8425 39 Other: 8425 39 30 Powered by internal combustion piston engines: ex 8425 39 30 Other than for use in civil aircraft 8425 39 90 Other: ex 8425 39 90 Other than for use in civil aircraft Jacks; hoists of a kind used for raising vehicles: 8425 41 00 Built-in jacking systems of a type used in garages 8425 42 00 Other jacks and hoists, hydraulic: ex 8425 42 00 Other than for use in civil aircraft 8425 49 00 Other: ex 8425 49 00 Other than for use in civil aircraft 8426 Ships’ derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane: Other machinery, self-propelled: 8426 41 00 On tyres 8426 49 00 Other Other machinery: 8426 91 Designed for mounting on road vehicles 8426 99 00 Other ex 8426 99 00 Other than for use in civil aircraft 8428 Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics): 8428 20 Pneumatic elevators and conveyors: 8428 20 30 Specially designed for use in agriculture Other: 8428 20 91 For bulk materials 8428 20 98 Other ex 8428 20 98 Other than for use in civil aircraft Other continuous-action elevators and conveyors, for goods or materials: 8428 33 00 Other, belt type: ex 8428 33 00 Other than for use in civil aircraft 8428 39 Other: 8428 39 20 Roller conveyors: ex 8428 39 20 Other than for use in civil aircraft 8428 39 90 Other: ex 8428 39 90 Other than for use in civil aircraft 8428 90 Other machinery: 8428 90 30 Rolling-mill machinery; roller tables for feeding and removing products; tilters and manipulators for ingots, balls, bars and slabs Other: Loaders specially designed for use in agriculture: 8428 90 71 Designed for attachment to agricultural tractors 8428 90 79 Other Other: 8428 90 91 Mechanical loaders for bulk material 8428 90 95 Other: ex 8428 90 95 Other than mine wagon pushers, locomotive or wagon traversers, wagon tippers and similar railway wagon handling equipment 8429 Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and roadrollers: Bulldozers and angledozers: 8429 11 00 Track laying: ex 8429 11 00 Of an output of less than 250 kW 8429 19 00 Other 8429 40 Tamping machines and roadrollers Mechanical shovels, excavators and shovel loaders: 8429 51 Front-end shovel loaders: Other: 8429 51 91 Crawler shovel loaders 8429 51 99 Other 8429 52 Machinery with a 360° revolving superstructure 8429 59 00 Other 8433 Harvesting or threshing machinery, including straw or fodder balers; grass or hay mowers; machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, other than machinery of heading 8437 : Mowers for lawns, parks or sports grounds: 8433 11 Powered, with the cutting device rotating in a horizontal plane 8433 19 Other 8433 20 Other mowers, including cutter bars for tractor mounting 8433 30 Other haymaking machinery 8433 40 Straw or fodder balers, including pick-up balers Other harvesting machinery; threshing machinery: 8433 51 00 Combine harvester-threshers 8433 52 00 Other threshing machinery 8433 53 Root or tuber harvesting machines: 8433 53 30 Beet-topping machines and beet harvesters 8433 59 Other: Forage harvesters: 8433 59 11 Self-propelled 8433 59 19 Other 8433 60 00 Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce 8435 Presses, crushers and similar machinery used in the manufacture of wine, cider, fruit juices or similar beverages: 8435 10 00 Machinery 8436 Other agricultural, horticultural, forestry, poultry-keeping or bee-keeping machinery, including germination plant fitted with mechanical or thermal equipment; poultry incubators and brooders 8437 Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables; machinery used in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm-type machinery: 8437 10 00 Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables 8437 80 00 Other machinery 8438 Machinery, not specified or included elsewhere in this chapter, for the industrial preparation or manufacture of food or drink, other than machinery for the extraction or preparation of animal or fixed vegetable fats or oils 8450 Household or laundry-type washing machines, including machines which both wash and dry: Machines, each of a dry linen capacity not exceeding 10 kg: 8450 11 Fully-automatic machines: 8450 11 90 Each of a dry linen capacity exceeding 6 kg but not exceeding 10 kg 8450 12 00 Other machines, with built-in centrifugal drier 8450 19 00 Other 8451 Machinery (other than machines of heading 8450 ) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made-up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics: Drying machines: 8451 21 Each of a dry linen capacity not exceeding 10 kg 8451 29 00 Other 8456 Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electrodischarge, electrochemical, electron beam, ionic-beam or plasma arc processes: 8456 10 00 Operated by laser or other light or photon beam processes: ex 8456 10 00 Other than of a kind used in the manufacture of semiconductor wafers or devices 8456 20 00 Operated by ultrasonic processes 8456 30 Operated by electrodischarge processes 8456 90 00 Other 8457 Machining centres, unit construction machines (single station) and multi-station transfer machines, for working metal 8458 Lathes (including turning centres) for removing metal 8459 Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centres) of heading 8458 8460 Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461 8461 Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included 8462 Machine tools (including presses) for working metal by forging, hammering or die-stamping; machine tools (including presses) for working metal by bending, folding, straightening, flattening, shearing, punching or notching; presses for working metal or metal carbides, not specified above 8463 Other machine tools for working metal or cermets, without removing material: 8463 10 Drawbenches for bars, tubes, profiles, wire or the like: 8463 10 90 Other 8463 20 00 Thread-rolling machines 8463 30 00 Machines for working wire 8463 90 00 Other 8468 Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting, other than those of heading 8515 ; gas-operated surface tempering machines and appliances 8474 Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand: Mixing or kneading machines: 8474 32 00 Machines for mixing mineral substances with bitumen 8474 39 Other 8474 80 Other machinery 8479 Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter: Other machines and mechanical appliances: 8479 82 00 Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring machines 8479 89 Other: 8479 89 60 Central greasing systems 8481 Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves: 8481 80 Other appliances: Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures: 8481 80 11 Mixing valves 8481 80 19 Other Central heating radiator valves: 8481 80 31 Thermostatic valves 8481 80 39 Other 8481 80 40 Valves for pneumatic tyres and inner tubes Other: Process control valves: 8481 80 59 Other Other: Gate valves: 8481 80 61 Of cast iron 8481 80 63 Of steel 8481 80 69 Other Globe valves: 8481 80 71 Of cast iron 8481 80 73 Of steel 8481 80 79 Other 8481 80 85 Butterfly valves 8481 80 87 Diaphragm valves 8481 90 00 Parts 8482 Ball or roller bearings: 8482 10 Ball bearings: 8482 10 90 Other 8483 Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints): 8483 10 Transmission shafts (including cam shafts and crank shafts) and cranks: Cranks and crank shafts: 8483 10 21 Of cast iron or cast steel: ex 8483 10 21 Other than for use in civil aircraft 8483 10 25 Of open-die forged steel: ex 8483 10 25 Other than for use in civil aircraft 8483 10 29 Other: ex 8483 10 29 Other than for use in civil aircraft 8483 10 50 Articulated shafts: ex 8483 10 50 Other than for use in civil aircraft 8483 30 Bearing housings, not incorporating ball or roller bearings; plain shaft bearings: 8483 30 80 Plain shaft bearings: ex 8483 30 80 Other than for use in civil aircraft 8483 40 Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters: 8483 40 30 Ball or roller screws: ex 8483 40 30 Other than for use in civil aircraft 8483 40 90 Other: ex 8483 40 90 Other than for use in civil aircraft 8483 60 Clutches and shaft couplings (including universal joints): 8483 60 20 Of cast iron or cast steel: ex 8483 60 20 Other than for use in civil aircraft 8483 60 80 Other: ex 8483 60 80 Other than for use in civil aircraft 8486 Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note 9(c) to this chapter; parts and accessories: 8486 30 Machines and apparatus for the manufacture of flat panel displays: 8486 30 30 Apparatus for dry-etching patterns on liquid crystal devices (LCD) substrates 8501 Electric motors and generators (excluding generating sets): 8501 10 Motors of an output not exceeding 37,5 W 8501 20 00 Universal AC/DC motors of an output exceeding 37,5 W: ex 8501 20 00 Other than of an output exceeding 735 W but not exceeding 150 kW for use in civil aircraft Other DC motors; DC generators: 8501 31 00 Of an output not exceeding 750 W: ex 8501 31 00 Other than motors of an output exceeding 735 W, DC generators, for use in civil aircraft 8501 32 Of an output exceeding 750 W but not exceeding 75 kW: 8501 32 20 Of an output exceeding 750 W but not exceeding 7,5 kW: ex 8501 32 20 Other than for use in civil aircraft 8501 32 80 Of an output exceeding 7,5 kW but not exceeding 75 kW: ex 8501 32 80 Other than for use in civil aircraft 8501 33 00 Of an output exceeding 75 kW but not exceeding 375 kW: ex 8501 33 00 Other than motors of an output not exceeding 150 kW and generators for use in civil aircraft 8501 34 Of an output exceeding 375 kW: 8501 34 50 Traction motors Other, of an output: 8501 34 92 Exceeding 375 kW but not exceeding 750 kW: ex 8501 34 92 Other than generators for use in civil aircraft 8501 34 98 Exceeding 750 kW: ex 8501 34 98 Other than generators for use in civil aircraft Other AC motors, multi-phase: 8501 53 Of an output exceeding 75 kW: Other, of an output: 8501 53 94 Exceeding 375 kW but not exceeding 750 kW 8501 53 99 Exceeding 750 kW AC generators (alternators): 8501 62 00 Of an output exceeding 75 kVA but not exceeding 375 kVA: ex 8501 62 00 Other than for use in civil aircraft 8501 63 00 Of an output exceeding 375 kVA but not exceeding 750 kVA: ex 8501 63 00 Other than for use in civil aircraft 8501 64 00 Of an output exceeding 750 kVA 8502 Electric generating sets and rotary converters: Generating sets with compression-ignition internal combustion piston engines (diesel or semi-diesel engines): 8502 11 Of an output not exceeding 75 kVA: 8502 11 20 Of an output not exceeding 7,5 kVA: ex 8502 11 20 Other than for use in civil aircraft 8502 11 80 Of an output exceeding 7,5 kVA but not exceeding 75 kVA: ex 8502 11 80 Other than for use in civil aircraft 8502 12 00 Of an output exceeding 75 kVA but not exceeding 375 kVA: ex 8502 12 00 Other than for use in civil aircraft 8502 13 Of an output exceeding 375 kVA: 8502 13 20 Of an output exceeding 375 kVA but not exceeding 750 kVA: ex 8502 13 20 Other than for use in civil aircraft 8502 13 40 Of an output exceeding 750 kVA but not exceeding 2 000 kVA: ex 8502 13 40 Other than for use in civil aircraft 8502 13 80 Of an output exceeding 2 000 kVA: ex 8502 13 80 Other than for use in civil aircraft 8502 20 Generating sets with spark-ignition internal combustion piston engines: 8502 20 20 Of an output not exceeding 7,5 kVA: ex 8502 20 20 Other than for use in civil aircraft 8502 20 40 Of an output exceeding 7,5 kVA but not exceeding 375 kVA: ex 8502 20 40 Other than for use in civil aircraft 8502 20 60 Of an output exceeding 375 kVA but not exceeding 750 kVA: ex 8502 20 60 Other than for use in civil aircraft 8502 20 80 Of an output exceeding 750 kVA: ex 8502 20 80 Other than for use in civil aircraft Other generating sets: 8502 39 Other: 8502 39 20 Turbo-generators: ex 8502 39 20 Other than for use in civil aircraft 8502 39 80 Other: ex 8502 39 80 Other than for use in civil aircraft 8502 40 00 Electric rotary converters: ex 8502 40 00 Other than for use in civil aircraft 8504 Electrical transformers, static converters (for example, rectifiers) and inductors: 8504 10 Ballasts for discharge lamps or tubes: 8504 10 20 Inductors, whether or not connected with a capacitor: ex 8504 10 20 Other than for use in civil aircraft 8504 10 80 Other: ex 8504 10 80 Other than for use in civil aircraft Other transformers: 8504 31 Having a power handling capacity not exceeding 1 kVA: Measuring transformers: 8504 31 21 For voltage measurement: ex 8504 31 21 Other than for use in civil aircraft 8504 31 29 Other: ex 8504 31 29 Other than for use in civil aircraft 8504 31 80 Other: ex 8504 31 80 Other than for use in civil aircraft 8504 34 00 Having a power handling capacity exceeding 500 kVA 8504 40 Static converters: Other: 8504 40 40 Polycrystalline semiconductor rectifiers: ex 8504 40 40 Other than for use in civil aircraft Other: Other: Inverters: 8504 40 84 Having a power handling capacity not exceeding 7,5 kVA: ex 8504 40 84 Other than for use in civil aircraft 8504 50 Other inductors: 8504 50 95 Other: ex 8504 50 95 Other than for use in civil aircraft 8505 Electromagnets; permanent magnets and articles intended to become permanent magnets after magnetisation; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads: 8505 20 00 Electromagnetic couplings, clutches and brakes 8505 90 Other, including parts: 8505 90 30 Electromagnetic or permanent magnet chucks, clamps and similar holding devices 8505 90 90 Parts 8506 Primary cells and primary batteries: 8506 10 Manganese dioxide: Alkaline: 8506 10 11 Cylindrical cells 8507 Electric accumulators, including separators therefor, whether or not rectangular (including square): 8507 10 Lead-acid, of a kind used for starting piston engines: Of a weight not exceeding 5 kg: 8507 10 41 Working with liquid electrolyte: ex 8507 10 41 Other than for use in civil aircraft 8507 10 49 Other: ex 8507 10 49 Other than for use in civil aircraft Of a weight exceeding 5 kg: 8507 10 92 Working with liquid electrolyte: ex 8507 10 92 Other than for use in civil aircraft 8507 10 98 Other: ex 8507 10 98 Other than for use in civil aircraft 8507 20 Other lead-acid accumulators: Traction accumulators: 8507 20 41 Working with liquid electrolyte: ex 8507 20 41 Other than for use in civil aircraft 8507 20 49 Other: ex 8507 20 49 Other than for use in civil aircraft Other: 8507 20 92 Working with liquid electrolyte: ex 8507 20 92 Other than for use in civil aircraft 8507 20 98 Other: ex 8507 20 98 Other than for use in civil aircraft 8507 30 Nickel-cadmium: 8507 30 20 Hermetically sealed: ex 8507 30 20 Other than for use in civil aircraft Other: 8507 30 81 Traction accumulators: ex 8507 30 81 Other than for use in civil aircraft 8507 30 89 Other: ex 8507 30 89 Other than for use in civil aircraft 8507 40 00 Nickel-iron: ex 8507 40 00 Other than for use in civil aircraft 8507 80 Other accumulators: 8507 80 20 Nickel-hydride: ex 8507 80 20 Other than for use in civil aircraft 8507 80 30 Lithium-ion: ex 8507 80 30 Other than for use in civil aircraft 8507 80 80 Other: ex 8507 80 80 Other than for use in civil aircraft 8507 90 Parts: 8507 90 20 Plates for accumulators: ex 8507 90 20 Other than for use in civil aircraft 8507 90 30 Separators: ex 8507 90 30 Other than for use in civil aircraft 8507 90 90 Other: ex 8507 90 90 Other than for use in civil aircraft 8514 Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss); other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss: 8514 10 Resistance heated furnaces and ovens: 8514 20 Furnaces and ovens functioning by induction or dielectric loss: 8514 40 00 Other equipment for the heat treatment of materials by induction or dielectric loss 8516 Electric instantaneous or storage water heaters and immersion heaters; electric space-heating apparatus and soil-heating apparatus; electrothermic hairdressing apparatus (for example, hairdryers, hair curlers, curling tong heaters) and hand dryers; electric smoothing irons; other electrothermic appliances of a kind used for domestic purposes; electric heating resistors, other than those of heading 8545 : 8516 60 Other ovens; cookers, cooking plates, boiling rings; grillers and roasters: 8516 60 10 Cookers (incorporating at least an oven and a hob) 8516 80 Electric heating resistors: 8516 80 20 Assembled with an insulated former: ex 8516 80 20 Other than assembled only with a simple insulated former and electrical connections, used for antiicing or de-icing, for use in civil aircraft 8516 80 80 Other: ex 8516 80 80 Other than assembled only with a simple insulated former and electrical connections, used for antiicing or de-icing, for use in civil aircraft 8516 90 00 Parts 8517 Telephone sets, including telephones for cellular networks or for other wireless networks; other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network), other than transmission or reception apparatus of heading 8443 , 8525 , 8527 or 8528 : Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network): 8517 62 00 Machines for the reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus: ex 8517 62 00 Telephonic or telegraphic switching apparatus 8518 Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers; audiofrequency electric amplifiers; electric sound amplifier sets: Loudspeakers, whether or not mounted in their enclosures: 8518 21 00 Single loudspeakers, mounted in their enclosures: ex 8518 21 00 Other than for use in civil aircraft 8518 22 00 Multiple loudspeakers, mounted in the same enclosure: ex 8518 22 00 Other than for use in civil aircraft 8518 29 Other: 8518 29 95 Other: ex 8518 29 95 Other than for use in civil aircraft 8525 Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras; digital cameras and video camera recorders: 8525 60 00 Transmission apparatus incorporating reception apparatus ex 8525 60 00 Other than for use in civil aircraft 8528 Monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus: Reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus: 8528 72 Other, colour: Other: With integral tube: With a screen width/height ratio less than 1,5, with a diagonal measurement of the screen: 8528 72 35 Exceeding 52 cm but not exceeding 72 cm 8535 Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, fuses, lightning arresters, voltage limiters, surge suppressors, plugs and other connectors, junction boxes), for a voltage exceeding 1 000 V: 8535 10 00 Fuses Automatic circuit breakers: 8535 21 00 For a voltage of less than 72,5 kV 8535 29 00 Other 8535 30 Isolating switches and make-and-break switches: 8535 90 00 Other 8536 Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000 V; connectors for optical fibres, optical fibre bundles or cables: 8536 10 Fuses 8536 20 Automatic circuit breakers 8536 30 Other apparatus for protecting electrical circuits Lamp holders, plugs and sockets: 8536 61 Lamp holders 8536 70 Connectors for optical fibres, optical fibre bundles or cables 8536 90 Other apparatus: 8536 90 01 Prefabricated elements for electrical circuits 8536 90 85 Other 8537 Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536 , for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517 8539 Electric filament or discharge lamps, including sealed beam lamp units and ultraviolet or infra-red lamps; arc lamps: 8539 10 00 Sealed beam lamp units: ex 8539 10 00 Other than for use in civil aircraft Discharge lamps, other than ultraviolet lamps: 8539 32 Mercury or sodium vapour lamps; metal halide lamps 8539 39 00 Other Ultraviolet or infra-red lamps; arc lamps: 8539 41 00 Arc lamps 8539 49 Other: 8539 49 10 Ultraviolet lamps 8539 90 Parts: 8539 90 10 Lamp bases 8540 Thermionic, cold cathode or photocathode valves and tubes (for example, vacuum or vapour or gas filled valves and tubes, mercury arc rectifying valves and tubes, cathode ray tubes, television camera tubes): 8540 20 Television camera tubes; image converters and intensifiers; other photocathode tubes: 8540 20 80 Other 8540 40 00 Data/graphic display tubes, colour, with a phosphor dot screen pitch smaller than 0,4 mm 8540 50 00 Data/graphic display tubes, black and white or other monochrome 8540 60 00 Other cathode ray tubes Microwave tubes (for example, magnetrons, klystrons, travelling wave tubes, carcinotrons), excluding grid-controlled tubes: 8540 71 00 Magnetrons 8540 72 00 Klystrons 8540 79 00 Other Other valves and tubes: 8540 81 00 Receiver or amplifier valves and tubes 8540 89 00 Other 8544 Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors: Winding wire: 8544 11 Of copper 8544 19 Other 8544 70 00 Optical fibre cables 8546 Electrical insulators of any material 8605 00 00 Railway or tramway passenger coaches, not self-propelled; luggage vans, post office coaches and other special purpose railway or tramway coaches, not selfpropelled (excluding those of heading 8604 ) 8606 Railway or tramway goods vans and wagons, not self-propelled: 8606 10 00 Tank wagons and the like 8606 30 00 Self-discharging vans and wagons, other than those of subheading 8606 10 Other: 8606 91 Covered and closed: 8606 91 80 Other: ex 8606 91 80 Insulated or refrigerated vans and wagons, other than those of subheading 8606 10 8606 99 00 Other 8701 Tractors (other than tractors of heading 8709 ): 8701 20 Road tractors for semi-trailers: 8701 20 10 New 8701 90 Other: Agricultural tractors (excluding pedestrian-controlled tractors) and forestry tractors, wheeled: New, of an engine power: 8701 90 35 Exceeding 75 kW but not exceeding 90 kW 8703 Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading 8702 ), including station wagons and racing cars: Other vehicles, with spark-ignition internal combustion reciprocating piston engine: 8703 21 Of a cylinder capacity not exceeding 1 000 cm 3 : 8703 21 10 New: ex 8703 21 10 Of the first degree of disassemble 8703 22 Of a cylinder capacity exceeding 1 000 cm 3 but not exceeding 1 500 cm 3 : 8703 22 10 New: ex 8703 22 10 Of the first degree of disassemble ex 8703 22 10 Other than of first or second degree of disassemble 8703 22 90 Used 8703 23 Of a cylinder capacity exceeding 1 500 cm 3 but not exceeding 3 000 cm 3 : New: 8703 23 11 Motor caravans 8703 23 19 Other: ex 8703 23 19 Of the first degree of disassemble ex 8703 23 19 Other than of first or second degree of disassemble 8703 23 90 Used 8703 24 Of a cylinder capacity exceeding 3 000 cm 3 : 8703 24 10 New: ex 8703 24 10 Of the first degree of disassemble Other vehicles, with compression-ignition internal combustion piston engine (diesel or semi-diesel): 8703 31 Of a cylinder capacity not exceeding 1 500 cm 3 : 8703 31 10 New: ex 8703 31 10 Of the first degree of disassemble 8703 31 90 Used 8703 32 Of a cylinder capacity exceeding 1 500 cm 3 but not exceeding 2 500 cm 3 : New: 8703 32 11 Motor caravans 8703 32 19 Other: ex 8703 32 19 Of the first degree of disassemble ex 8703 32 19 Other than of first or second degree of disassemble 8703 32 90 Used 8703 33 Of a cylinder capacity exceeding 2 500 cm 3 : New: 8703 33 11 Motor caravans 8703 33 19 Other: ex 8703 33 19 Of the first degree of disassemble 8704 Motor vehicles for the transport of goods: Other, with compression-ignition internal combustion piston engine (diesel or semidiesel): 8704 21 Of a gross vehicle weight not exceeding 5 tonnes: 8704 21 10 Specially designed for the transport of highly radioactive materials ( Euratom ) Other: With engines of a cylinder capacity exceeding 2 500 cm 3 : 8704 21 31 New: ex 8704 21 31 Of the first degree of disassemble With engines of a cylinder capacity not exceeding 2 500 cm 3 : 8704 21 91 New: ex 8704 21 91 Of the first degree of disassemble 8704 22 Of a gross vehicle weight exceeding 5 tonnes but not exceeding 20 tonnes: 8704 22 10 Specially designed for the transport of highly radioactive materials ( Euratom ) Other: 8704 22 91 New: ex 8704 22 91 Of the first degree of disassemble 8704 23 Of a gross vehicle weight exceeding 20 tonnes: 8704 23 10 Specially designed for the transport of highly radioactive materials ( Euratom ) Other: 8704 23 91 New: ex 8704 23 91 Of the first degree of disassemble Other, with spark-ignition internal combustion piston engine: 8704 31 Of a gross vehicle weight not exceeding 5 tonnes: 8704 31 10 Specially designed for the transport of highly radioactive materials ( Euratom ) Other: With engines of a cylinder capacity exceeding 2 800 cm 3 : 8704 31 31 New: ex 8704 31 31 Of the first degree of disassemble With engines of a cylinder capacity not exceeding 2 800 cm 3 : 8704 31 91 New: ex 8704 31 91 Of the first degree of disassemble 8704 32 Of a gross vehicle weight exceeding 5 tonnes: 8704 32 10 Specially designed for the transport of highly radioactive materials ( Euratom ) Other: 8704 32 91 New: ex 8704 32 91 Of the first degree of disassemble 8706 00 Chassis fitted with engines, for the motor vehicles of headings 8701 to 8705 8707 Bodies (including cabs), for the motor vehicles of headings 8701 to 8705 : 8707 10 For the vehicles of heading 8703 : 8707 10 10 For industrial assembly purposes 8710 00 00 Tanks and other armoured fighting vehicles, motorised, whether or not fitted with weapons, and parts of such vehicles 8711 Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars: 8711 10 00 With reciprocating internal combustion piston engine of a cylinder capacity not exceeding 50 cm 3 8711 50 00 With reciprocating internal combustion piston engine of a cylinder capacity exceeding 800 cm 3 8711 90 00 Other 8714 Parts and accessories of vehicles of headings 8711 to 8713 : Of motorcycles (including mopeds): 8714 11 00 Saddles 8714 19 00 Other Other: 8714 91 Frames and forks, and parts thereof 8714 92 Wheel rims and spokes 8714 93 Hubs, other than coaster braking hubs and hub brakes, and free-wheel sprocketwheels 8714 94 Brakes, including coaster braking hubs and hub brakes, and parts thereof 8714 95 00 Saddles 8714 96 Pedals and crank-gear, and parts thereof 8714 99 Other 8716 Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof: 8716 10 Trailers and semi-trailers of the caravan type, for housing or camping 8716 20 00 Self-loading or self-unloading trailers and semi-trailers for agricultural purposes Other trailers and semi-trailers for the transport of goods: 8716 31 00 Tanker trailers and tanker semi-trailers 8716 39 Other: 8716 39 10 Specially designed for the transport of highly radioactive materials ( Euratom ) Other: New: 8716 39 30 Semi-trailers Other: 8716 39 51 With a single axle 8716 39 80 Used 8716 40 00 Other trailers and semi-trailers 8716 80 00 Other vehicles 8716 90 Parts 9003 Frames and mountings for spectacles, goggles or the like, and parts thereof: Frames and mountings: 9003 19 Of other materials: 9003 19 10 Of precious metal or of rolled precious metal 9004 Spectacles, goggles and the like, corrective, protective or other: 9004 10 Sunglasses 9028 Gas, liquid or electricity supply or production meters, including calibrating meters therefor: 9028 10 00 Gas meters 9028 20 00 Liquid meters 9028 30 Electricity meters 9028 90 Parts and accessories: 9028 90 10 For electricity meters 9101 Wristwatches, pocket-watches and other watches, including stopwatches, with case of precious metal or of metal clad with precious metal 9102 Wristwatches, pocket-watches and other watches, including stopwatches, other than those of heading 9101 9103 Clocks with watch movements, excluding clocks of heading 9104 9105 Other clocks 9113 Watch straps, watch bands and watch bracelets, and parts thereof 9401 Seats (other than those of heading 9402 ), whether or not convertible into beds, and parts thereof: 9401 20 00 Seats of a kind used for motor vehicles 9401 30 Swivel seats with variable height adjustment: 9401 30 10 Upholstered, with backrest and fitted with castors or glides 9401 80 00 Other seats 9401 90 Parts: 9401 90 10 Of seats of a kind used for aircraft Other: 9401 90 80 Other 9403 Other furniture and parts thereof: 9403 10 Metal furniture of a kind used in offices 9403 20 Other metal furniture: 9403 20 20 Beds: ex 9403 20 20 Other than for use in civil aircraft 9403 20 80 Other: ex 9403 20 80 Other than for use in civil aircraft 9403 70 00 Furniture of plastics: ex 9403 70 00 Other than for use in civil aircraft Furniture of other materials, including cane, osier, bamboo or similar materials: 9403 81 00 Of bamboo or rattan 9403 89 00 Other 9403 90 Parts: 9403 90 10 Of metal 9404 Mattress supports; articles of bedding and similar furnishing (for example, mattresses, quilts, eiderdowns, cushions, pouffes and pillows) fitted with springs or stuffed or internally fitted with any material or of cellular rubber or plastics, whether or not covered: 9404 10 00 Mattress supports Mattresses: 9404 21 Of cellular rubber or plastics, whether or not covered 9404 30 00 Sleeping bags 9404 90 Other 9405 Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included: 9405 10 Chandeliers and other electric ceiling or wall lighting fittings, excluding those of a kind used for lighting public open spaces or thoroughfares: Of plastics: 9405 10 21 Of a kind used with filament lamps 9405 10 28 Other: ex 9405 10 28 Other than for use in civil aircraft 9405 10 30 Of ceramic materials 9405 10 50 Of glass Of other materials: 9405 10 91 Of a kind used with filament lamps 9405 10 98 Other: ex 9405 10 98 Other than for use in civil aircraft 9405 20 Electric table, desk, bedside or floor-standing lamps 9405 30 00 Lighting sets of a kind used for Christmas trees 9405 40 Other electric lamps and lighting fittings: 9405 50 00 Non-electrical lamps and lighting fittings 9405 60 Illuminated signs, illuminated nameplates and the like: 9405 60 20 Of plastics: ex 9405 60 20 Other than for use in civil aircraft Parts: 9405 91 Of glass Articles for electrical lighting fittings (excluding searchlights and spotlights): 9405 92 00 Of plastics: ex 9405 92 00 Other than parts of the articles of subheading 9405 10 or 9405 60 , for use in civil aircraft 9406 00 Prefabricated buildings: Other: Of iron or steel: 9406 00 38 Other 9406 00 80 Of other materials 9503 00 Tricycles, scooters, pedal cars and similar wheeled toys; dolls’ carriages; dolls; other toys; reduced-size (scale) models and similar recreational models, working or not; puzzles of all kinds: 9503 00 10 Tricycles, scooters, pedal cars and similar toys; dolls’ carriages: ex 9503 00 10 Tricycles, scooters, pedal cars and similar toys Dolls representing only human beings and parts and accessories thereof: 9503 00 21 Dolls 9503 00 29 Parts and accessories 9503 00 30 Electric trains, including tracks, signals and other accessories therefor; reduced-size (scale) model assembly kits Other construction sets and constructional toys: 9503 00 35 Of plastics 9503 00 39 Of other materials: ex 9503 00 39 Other than of wood Toys representing animals or non-human creatures: 9503 00 41 Stuffed 9503 00 49 Other: ex 9503 00 49 Other than of wood 9503 00 55 Toy musical instruments and apparatus Puzzles: 9503 00 69 Other 9503 00 70 Other toys, put up in sets or outfits Other toys and models, incorporating a motor: 9503 00 75 Of plastics 9503 00 79 Of other materials Other: 9503 00 81 Toy weapons 9503 00 85 Die-cast miniature models of metal Other: 9503 00 95 Of plastics 9503 00 99 Other 9504 Articles for funfair, table or parlour games, including pintables, billiards, special tables for casino games and automatic bowling alley equipment: 9504 10 00 Video games of a kind used with a television receiver 9504 20 Articles and accessories for billiards of all kinds: 9504 20 90 Other 9504 30 Other games, operated by coins, banknotes, bank cards, tokens or by other means of payment, other than bowling alley equipment 9504 40 00 Playing cards 9504 90 Other 9505 Festive, carnival or other entertainment articles, including conjuring tricks and novelty jokes 9507 Fishing rods, fish-hooks and other line fishing tackle; fish landing nets, butterfly nets and similar nets; decoy ‘birds’ (other than those of heading 9208 or 9705 ) and similar hunting or shooting requisites: 9507 10 00 Fishing rods 9507 20 Fish-hooks, whether or not snelled 9507 90 00 Other 9508 Roundabouts, swings, shooting galleries and other fairground amusements; travelling circuses and travelling menageries; travelling theatres 9603 Brooms, brushes (including brushes constituting parts of machines, appliances or vehicles), hand-operated mechanical floor sweepers, not motorised, mops and feather dusters; prepared knots and tufts for broom or brush making; paint pads and rollers; squeegees (other than roller squeegees): Toothbrushes, shaving brushes, hair brushes, nail brushes, eyelash brushes and other toilet brushes for use on the person, including such brushes constituting parts of appliances: 9603 21 00 Toothbrushes, including dental-plate brushes 9603 29 Other 9603 30 Artists’ brushes, writing brushes and similar brushes for the application of cosmetics: 9603 30 90 Brushes for the application of cosmetics 9603 40 Paint, distemper, varnish or similar brushes (other than brushes of subheading 9603 30 ); paint pads and rollers: 9603 50 00 Other brushes constituting parts of machines, appliances or vehicles 9605 00 00 Travel sets for personal toilet, sewing or shoe or clothes cleaning 9607 Slide fasteners and parts thereof: Slide fasteners: 9607 11 00 Fitted with chain scoops of base metal 9607 19 00 Other 9608 Ballpoint pens; felt-tipped and other porous-tipped pens and markers; fountain pens, stylograph pens and other pens; duplicating stylos; propelling or sliding pencils; pen-holders, pencil-holders and similar holders; parts (including caps and clips) of the foregoing articles, other than those of heading 9609 9610 00 00 Slates and boards, with writing or drawing surfaces, whether or not framed 9611 00 00 Date, sealing or numbering stamps, and the like (including devices for printing or embossing labels), designed for operating in the hand; hand-operated composing sticks and hand printing sets incorporating such composing sticks 9612 Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxes: 9612 10 Ribbons 9613 Cigarette lighters and other lighters, whether or not mechanical or electrical, and parts thereof other than flints and wicks 9614 00 Smoking pipes (including pipe bowls) and cigar or cigarette holders, and parts thereof 9615 Combs, hair-slides and the like; hairpins, curling pins, curling grips, hair-curlers and the like, other than those of heading 8516 , and parts thereof 9616 Scent sprays and similar toilet sprays, and mounts and heads therefor; powderpuffs and pads for the application of cosmetics or toilet preparations 9617 00 Vacuum flasks and other vacuum vessels, complete with cases; parts thereof other than glass inners 9701 Paintings, drawings and pastels, executed entirely by hand, other than drawings of heading 4906 and other than hand-painted or hand-decorated manufactured articles; collages and similar decorative plaques 9702 00 00 Original engravings, prints and lithographs 9703 00 00 Original sculptures and statuary, in any material 9704 00 00 Postage or revenue stamps, stamp-postmarks, first-day covers, postal stationery (stamped paper), and the like, used or unused, other than those of heading 4907 9705 00 00 Collections and collectors’ pieces of zoological, botanical, mineralogical, anatomical, historical, archaeological, palaeontological, ethnographic or numismatic interest 9706 00 00 Antiques of an age exceeding 100 years ANNEX I(c) SERBIAN TARIFF CONCESSIONS FOR COMMUNITY INDUSTRIAL PRODUCTS Referred to in Article 21 Duty rates will be reduced as follows: (a) on the date of entry into force of this Agreement, the import duty will be reduced to 85 % of the basic duty; (b) on 1 January of the first year following the date of entry into force of this Agreement, the import duty will be reduced to 70 % of basic duty; (c) on 1 January of the second year following the date of entry into force of this Agreement, the import duty will be reduced to 55 % of basic duty; (d) on 1 January of the third year following the date of entry into force of this Agreement, the import duty will be reduced to 40 % of basic duty; (e) on 1 January of the fourth year following the date of entry into force of this Agreement, the import duty will be reduced to 20 % of basic duty; (f) on 1 January of the fifth year following the date of entry into force of this Agreement, the remaining import duties will be abolished. CN code Description 3006 Pharmaceutical goods specified in note 4 to this chapter: Other: 3006 92 00 Waste pharmaceuticals 3303 00 Perfumes and toilet waters 3304 Beauty or make-up preparations and preparations for the care of the skin (other than medicaments), including sunscreen or suntan preparations; manicure or pedicure preparations: 3304 10 00 Lip make-up preparations 3304 20 00 Eye make-up preparations 3304 30 00 Manicure or pedicure preparations Other: 3304 91 00 Powders, whether or not compressed 3305 Preparations for use on the hair: 3305 20 00 Preparations for permanent waving or straightening 3305 30 00 Hair lacquers 3305 90 Other 3307 Pre-shave, shaving or aftershave preparations, personal deodorants, bath preparations, depilatories and other perfumery, cosmetic or toilet preparations, not elsewhere specified or included; prepared room deodorisers, whether or not perfumed or having disinfectant properties: 3307 10 00 Pre-shave, shaving or aftershave preparations 3307 20 00 Personal deodorants and antiperspirants 3307 30 00 Perfumed bath salts and other bath preparations Preparations for perfuming or deodorising rooms, including odoriferous preparations used during religious rites: 3307 49 00 Other 3307 90 00 Other 3401 Soap; organic surface-active products and preparations for use as soap, in the form of bars, cakes, moulded pieces or shapes, whether or not containing soap; organic surface-active products and preparations for washing the skin, in the form of liquid or cream and put up for retail sale, whether or not containing soap; paper, wadding, felt and nonwovens, impregnated, coated or covered with soap or detergent: Soap and organic surface-active products and preparations, in the form of bars, cakes, moulded pieces or shapes, and paper, wadding, felt and nonwovens, impregnated, coated or covered with soap or detergent: 3401 11 00 For toilet use (including medicated products) 3401 19 00 Other 3402 Organic surface-active agents (other than soap); surface-active preparations, washing preparations (including auxiliary washing preparations) and cleaning preparations, whether or not containing soap, other than those of heading 3401 : 3402 90 Other: 3402 90 10 Surface-active preparations: ex 3402 90 10 Other than for flotation of ore (foamers) 3604 Fireworks, signalling flares, rain rockets, fog signals and other pyrotechnic articles: 3604 10 00 Fireworks 3825 Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in note 6 to this chapter: 3825 10 00 Municipal waste 3825 20 00 Sewage sludge 3825 30 00 Clinical waste Waste organic solvents: 3825 41 00 Halogenated 3825 49 00 Other 3825 50 00 Wastes of metal pickling liquors, hydraulic fluids, brake fluids and anti-freeze fluids Other wastes from chemical or allied industries: 3825 61 00 Mainly containing organic constituents 3825 69 00 Other 3825 90 Other: 3825 90 90 Other 3922 Baths, shower-baths, sinks, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics 3923 Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics: 3923 10 00 Boxes, cases, crates and similar articles Sacks and bags (including cones): 3923 21 00 Of polymers of ethylene 3923 50 Stoppers, lids, caps and other closures: 3923 50 90 Other 3924 Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics: 3924 10 00 Tableware and kitchenware 3925 Builders’ ware of plastics, not elsewhere specified or included: 3925 20 00 Doors, windows and their frames and thresholds for doors 3925 30 00 Shutters, blinds (including venetian blinds) and similar articles and parts thereof 3926 Other articles of plastics and articles of other materials of headings 3901 to 3914 : 3926 10 00 Office or school supplies 3926 20 00 Articles of apparel and clothing accessories (including gloves, mittens and mitts) 4012 Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber: Retreaded tyres: 4012 11 00 Of a kind used on motor cars (including station wagons and racing cars) 4012 12 00 Of a kind used on buses or lorries 4012 13 00 Of a kind used on aircraft: ex 4012 13 00 Other than for use on civil aircraft 4012 19 00 Other 4012 20 00 Used pneumatic tyres: ex 4012 20 00 Other than for use on civil aircraft 4012 90 Other: 4013 Inner tubes, of rubber: 4013 10 Of a kind used on motor cars (including station wagons and racing cars), buses or lorries: 4013 10 10 Of the kind used on motor cars (including station wagons and racing cars) 4016 Other articles of vulcanised rubber other than hard rubber: Other: 4016 94 00 Boat or dock fenders, whether or not inflatable 4202 Trunks, suitcases, vanity cases, executive-cases, briefcases, school satchels, spectacle cases, binocular cases, camera cases, musical instrument cases, gun cases, holsters and similar containers; travelling-bags, insulated food or beverages bags, toilet bags, rucksacks, handbags, shopping-bags, wallets, purses, map-cases, cigarettecases, tobacco-pouches, tool bags, sports bags, bottle-cases, jewellery boxes, powder boxes, cutlery cases and similar containers, of leather or of composition leather, of sheeting of plastics, of textile materials, of vulcanised fibre or of paperboard, or wholly or mainly covered with such materials or with paper 4205 00 Other articles of leather or of composition leather: 4205 00 90 Other 4414 00 Wooden frames for paintings, photographs, mirrors or similar objects: 4414 00 90 Of other wood 4415 Packing cases, boxes, crates, drums and similar packings, of wood; cable-drums of wood; pallets, box pallets and other load boards, of wood; pallet collars of wood 4417 00 00 Tools, tool bodies, tool handles, broom or brush bodies and handles, of wood; boot or shoe lasts and trees, of wood 4418 Builders’ joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes: 4418 10 Windows, French windows and their frames 4418 20 Doors and their frames and thresholds 4421 Other articles of wood: 4421 90 Other: 4421 90 98 Other 4817 Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery 4818 Toilet paper and similar paper, cellulose wadding or webs of cellulose fibres, of a kind used for household or sanitary purposes, in rolls of a width not exceeding 36 cm, or cut to size or shape; handkerchiefs, cleansing tissues, towels, tablecloths, serviettes, napkins for babies, tampons, bedsheets and similar household, sanitary or hospital articles, articles of apparel and clothing accessories, of paper pulp, paper, cellulose wadding or webs of cellulose fibres: 4818 20 Handkerchiefs, cleansing or facial tissues and towels 4819 Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres; box files, letter trays, and similar articles, of paper or paperboard, of a kind used in offices, shops or the like 4820 Registers, account books, notebooks, order books, receipt books, letter pads, memorandum pads, diaries and similar articles, exercise books, blotting pads, binders (loose-leaf or other), folders, file covers, manifold business forms, interleaved carbon sets and other articles of stationery, of paper or paperboard; albums for samples or for collections and book covers, of paper or paperboard 4821 Paper or paperboard labels of all kinds, whether or not printed: 4821 10 Printed 4823 Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape; other articles of paper pulp, paper, paperboard, cellulose wadding or webs of cellulose fibres: Trays, dishes, plates, cups and the like, of paper or paperboard: 4823 61 00 Of bamboo 4823 69 Other 4823 90 Other: 4823 90 40 Paper and paperboard, of a kind used for writing, printing or other graphic purposes 4823 90 85 Other ex 4823 90 85 Other than floor coverings on a base of paper or of paperboard, whether or not cut to size 4909 00 Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmings: 4909 00 90 Other 4910 00 00 Calendars of any kind, printed, including calendar blocks 4911 Other printed matter, including printed pictures and photographs: 4911 10 Trade advertising material, commercial catalogues and the like Other: 4911 99 00 Other: ex 4911 99 00 Other than printed optical variable elements (holograms) 6401 Waterproof footwear with outer soles and uppers of rubber or of plastics, the uppers of which are neither fixed to the sole nor assembled by stitching, riveting, nailing, screwing, plugging or similar processes: Other footwear: 6401 99 00 Other: ex 6401 99 00 Covering the knee 6402 Other footwear with outer soles and uppers of rubber or plastics: 6402 20 00 Footwear with upper straps or thongs assembled to the sole by means of plugs Other footwear: 6402 91 Covering the ankle 6402 99 Other 6403 Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of leather: 6403 40 00 Other footwear, incorporating a protective metal toecap Other footwear with outer soles of leather: 6403 51 Covering the ankle 6403 59 Other: 6403 59 05 Made on a base or platform of wood, not having an inner sole Other footwear: 6403 91 Covering the ankle 6403 99 Other 6405 Other footwear 6702 Artificial flowers, foliage and fruit and parts thereof; articles made of artificial flowers, foliage or fruit 6806 Slag-wool, rock-wool and similar mineral wools; exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials; mixtures and articles of heat-insulating, sound-insulating or sound-absorbing mineral materials, other than those of heading 6811 or 6812 or of Chapter 69: 6806 10 00 Slag-wool, rock-wool and similar mineral wools (including intermixtures thereof), in bulk, sheets or rolls 6901 00 00 Bricks, blocks, tiles and other ceramic goods of siliceous fossil meals (for example, kieselguhr, tripolite or diatomite) or of similar siliceous earths 6902 Refractory bricks, blocks, tiles and similar refractory ceramic constructional goods, other than those of siliceous fossil meals or similar siliceous earths: 6902 10 00 Containing, by weight, singly or together, more than 50 % of the elements Mg, Ca or Cr, expressed as MgO, CaO or Cr 2 O 3 : ex 6902 10 00 Other than blocks for the glass furnaces 6902 20 Containing, by weight, more than 50 % of alumina (Al 2 O 3 ), of silica (SiO 2 ) or of a mixture or compound of these products 6902 20 10 Containing, by weight, 93 % or more of silica (SiO 2 ) Other: 6902 20 91 Containing, by weight, more than 7 % but less than 45 % of alumina (Al 2 O 3 ) 6902 20 99 Other: ex 6902 20 99 Other than blocks for the glass furnaces 6907 Unglazed ceramic flags and paving, hearth or wall tiles; unglazed ceramic mosaic cubes and the like, whether or not on a backing 6908 Glazed ceramic flags and paving, hearth or wall tiles; glazed ceramic mosaic cubes and the like, whether or not on a backing: 6908 10 Tiles, cubes and similar articles, whether or not rectangular, the largest surface area of which is capable of being enclosed in a square the side of which is less than 7 cm 6908 90 Other: Of common pottery: 6908 90 11 Double tiles of the ‘Spaltplatten’ type Other, of a maximum thickness: 6908 90 21 Not exceeding 15 mm 6908 90 29 Exceeding 15 mm Other: 6908 90 31 Double tiles of the ‘Spaltplatten’ type Other: 6908 90 51 With a face of not more than 90 cm 2 Other: 6908 90 91 Stoneware 6908 90 93 Earthenware or fine pottery 6910 Ceramic sinks, washbasins, washbasin pedestals, baths, bidets, water closet pans, flushing cisterns, urinals and similar sanitary fixtures 6911 Tableware, kitchenware, other household articles and toilet articles, of porcelain or china: 6911 10 00 Tableware and kitchenware 6914 Other ceramic articles: 6914 10 00 Of porcelain or china 7010 Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass: 7010 90 Other: 7010 90 10 Preserving jars (sterilising jars) Other: 7010 90 21 Made from tubing of glass Other, of a nominal capacity of: 7010 90 31 2,5 l or more Less than 2,5 l: For beverages and foodstuffs: Bottles: Of colourless glass, of a nominal capacity of: 7010 90 41 1 l or more 7010 90 43 More than 0,33 l but less than 1 l 7010 90 47 Less than 0,15 l Of coloured glass, of a nominal capacity of: 7010 90 51 1 l or more 7010 90 57 Less than 0,15 l Other, of a nominal capacity of: 7010 90 61 0,25 l or more 7010 90 67 Less than 0,25 l For other products: 7010 90 91 Of colourless glass 7010 90 99 Of coloured glass 7013 Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018 ) 7020 00 Other articles of glass: Glass inners for vacuum flasks or for other vacuum vessels: 7020 00 07 Unfinished 7020 00 08 Finished 7113 Articles of jewellery and parts thereof, of precious metal or of metal clad with precious metal 7114 Articles of goldsmiths’ or silversmiths’ wares and parts thereof, of precious metal or of metal clad with precious metal 7208 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hotrolled, not clad, plated or coated: 7208 10 00 In coils, not further worked than hot-rolled, with patterns in relief: ex 7208 10 00 Containing by weight less than 0,6 % of carbon Other, in coils, not further worked than hot-rolled, pickled: 7208 25 00 Of a thickness of 4,75 mm or more 7208 26 00 Of a thickness of 3 mm or more but less than 4,75 mm 7208 27 00 Of a thickness of less than 3 mm Other, in coils, not further worked than hot-rolled: 7208 36 00 Of a thickness exceeding 10 mm 7208 37 00 Of a thickness of 4,75 mm or more but not exceeding 10 mm 7208 38 00 Of a thickness of 3 mm or more but less than 4,75 mm 7208 40 00 Not in coils, not further worked than hot-rolled, with patterns in relief Other, not in coils, not further worked than hot-rolled: 7208 51 Of a thickness exceeding 10 mm: Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of: 7208 51 98 Less than 2 050 mm 7208 52 Of a thickness of 4,75 mm or more but not exceeding 10 mm: Other, of a width of: 7208 52 99 Less than 2 050 mm 7208 53 Of a thickness of 3 mm or more but less than 4,75 mm: 7208 53 90 Other 7208 54 00 Of a thickness of less than 3 mm 7208 90 Other: 7208 90 20 Perforated: ex 7208 90 20 Containing by weight less than 0,6 % of carbon 7208 90 80 Other: ex 7208 90 80 Containing by weight less than 0,6 % of carbon 7209 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated: In coils, not further worked than cold-rolled (cold-reduced): 7209 15 00 Of a thickness of 3 mm or more 7209 16 Of a thickness exceeding 1 mm but less than 3 mm: 7209 16 90 Other: ex 7209 16 90 Containing by weight less than 0,6 % of carbon 7209 17 Of a thickness of 0,5 mm or more but not exceeding 1 mm: 7209 17 90 Other: ex 7209 17 90 Other than: — containing by weght 0,6 % or more of carbon; — of a width of 1 500 mm or more; or — of a width of 1 350 mm or more but not more than 1 500 mm and of a thickness of 0,6 mm or more but not exceeding 0,7 mm 7209 18 Of a thickness of less than 0,5 mm: Other: 7209 18 91 Of a thickness of 0,35 mm or more but less than 0,5 mm: ex 7209 18 91 Containing by weight less than 0,6 % of carbon 7209 18 99 Of a thickness of less than 0,35 mm: ex 7209 18 99 Containing by weight less than 0,6 % of carbon Not in coils, not further worked than cold-rolled (cold-reduced): 7209 26 Of a thickness exceeding 1 mm but less than 3 mm: 7209 26 90 Other 7209 27 Of a thickness of 0,5 mm or more but not exceeding 1 mm: 7209 27 90 Other: ex 7209 27 90 Other than: — of a width of 1 500 mm or more; or — of a width of 1 350 mm or more but not more than 1 500 mm and of a thickness of 0,6 mm or more but not exceeding 0,7 mm 7209 90 Other: 7209 90 20 Perforated: ex 7209 90 20 Containing by weight less than 0,6 % of carbon 7209 90 80 Other: ex 7209 90 80 Containing by weight less than 0,6 % of carbon 7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated: Plated or coated with tin: 7210 11 00 Of a thickness of 0,5 mm or more 7210 12 Of a thickness of less than 0,5 mm: 7210 12 20 Tinplate: ex 7210 12 20 Of a thickness of 0,2 mm or more 7210 12 80 Other 7210 70 Painted, varnished or coated with plastics: 7210 90 Other: 7210 90 40 Tinned and printed 7210 90 80 Other 7211 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: Not further worked than hot-rolled: 7211 14 00 Other, of a thickness of 4,75 mm or more 7211 19 00 Other Not further worked than cold-rolled (cold-reduced): 7211 23 Containing by weight less than 0,25 % of carbon: Other: 7211 23 30 Of a thickness of 0,35 mm or more 7211 29 00 Other 7211 90 Other: 7211 90 20 Perforated: ex 7211 90 20 Containing by weight less than 0,6 % of carbon 7211 90 80 Other: ex 7211 90 80 Containing by weight less than 0,6 % of carbon 7212 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated: 7212 10 Plated or coated with tin: 7212 10 90 Other 7212 40 Painted, varnished or coated with plastics 7216 Angles, shapes and sections of iron or non-alloy steel: Angles, shapes and sections, not further worked than cold-formed or cold-finished: 7216 61 Obtained from flat-rolled products 7216 69 00 Other 7217 Wire of iron or non-alloy steel: 7217 10 Not plated or coated, whether or not polished: Containing by weight less than 0,25 % of carbon: 7217 10 10 With a maximum cross-sectional dimension of less than 0,8 mm With a maximum cross-sectional dimension of 0,8 mm or more: 7217 10 31 Containing indentations, ribs, grooves or other deformations produced during the rolling process 7217 10 50 Containing by weight 0,25 % or more but less than 0,6 % of carbon 7217 20 Plated or coated with zinc: Containing by weight less than 0,25 % of carbon: 7217 20 10 With a maximum cross-sectional dimension of less than 0,8 mm 7217 30 Plated or coated with other base metals: Containing by weight less than 0,25 % of carbon: 7217 30 41 Copper-coated 7217 90 Other: 7217 90 20 Containing by weight less than 0,25 % of carbon 7217 90 50 Containing by weight 0,25 % or more but less than 0,6 % of carbon 7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel: Line pipe of a kind used for oil or gas pipelines: 7306 11 Welded, of stainless steel: 7306 11 10 Longitudinally welded: ex 7306 11 10 Of an external diameter not exceeding 168,3 mm 7306 19 Other: Longitudinally welded: 7306 19 11 Of an external diameter not exceeding 168,3 mm 7306 30 Other, welded, of circular cross-section, of iron or non-alloy steel: Other: Other, of an external diameter: Not exceeding 168,3 mm: 7306 30 77 Other: ex 7306 30 77 Other than with attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Other, welded, of non-circular cross-section: 7306 61 Of square or rectangular cross-section: With a wall thickness not exceeding 2 mm: 7306 61 19 Other: ex 7306 61 19 Other than with attached fittings, suitable for conducting gases or liquids, for use in civil aircraft With a wall thickness exceeding 2 mm: 7306 61 99 Other: ex 7306 61 99 Other than with attached fittings, suitable for conducting gases or liquids, for use in civil aircraft 7306 69 Of other non-circular cross-section: 7306 69 90 Other: ex 7306 69 90 Other than with attached fittings, suitable for conducting gases or liquids, for use in civil aircraft 7312 Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated: 7312 10 Stranded wire, ropes and cables: Other, with a maximum cross-sectional dimension: Exceeding 3 mm: Ropes and cables (including locked coil ropes): Not coated or only plated or coated with zinc, with a maximum cross-sectional dimension: 7312 10 81 Exceeding 3 mm but not exceeding 12 mm: ex 7312 10 81 Other than with fittings attached, or made up into articles, for use in civil aircraft 7312 10 83 Exceeding 12 mm but not exceeding 24 mm: ex 7312 10 83 Other than with fittings attached, or made up into articles, for use in civil aircraft 7312 10 85 Exceeding 24 mm but not exceeding 48 mm: ex 7312 10 85 Other than with fittings attached, or made up into articles, for use in civil aircraft 7312 10 89 Exceeding 48 mm: ex 7312 10 89 Other than with fittings attached, or made up into articles, for use in civil aircraft 7312 10 98 Other: ex 7312 10 98 Other than with fittings attached, or made up into articles, for use in civil aircraft 7321 Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel: Cooking appliances and plate warmers: 7321 11 For gas fuel or for both gas and other fuels: 7321 12 00 For liquid fuel 7321 19 00 Other, including appliances for solid fuel: ex 7321 19 00 For solid fuel Other appliances: 7321 81 For gas fuel or for both gas and other fuels: 7321 82 For liquid fuel: 7321 90 00 Parts 7323 Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel: 7323 10 00 Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like Other: 7323 92 00 Of cast iron, enamelled 7323 94 Of iron (other than cast iron) or steel, enamelled: 7323 94 90 Other 7323 99 Other: Other: 7323 99 91 Varnished or painted 7324 Sanitary ware and parts thereof, of iron or steel: 7324 10 00 Sinks and washbasins, of stainless steel: ex 7324 10 00 Other than for use in civil aircraft Baths: 7324 29 00 Other 7407 Copper bars, rods and profiles: 7407 10 00 Of refined copper Of copper alloys: 7407 21 Of copper-zinc base alloys (brass) 7408 Copper wire: Of copper alloys: 7408 21 00 Of copper-zinc base alloys (brass) 7408 29 00 Other 7409 Copper plates, sheets and strip, of a thickness exceeding 0,15 mm 7411 Copper tubes and pipes 7412 Copper tube or pipe fittings (for example, couplings, elbows, sleeves) 7604 Aluminium bars, rods and profiles: 7604 10 Of aluminium, not alloyed Of aluminium alloys: 7604 21 00 Hollow profiles 7604 29 Other: 7604 29 90 Profiles 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm: Rectangular (including square): 7606 11 Of aluminium, not alloyed: 7606 12 Of aluminium alloys: 7606 12 10 Strip for venetian blinds Other: 7606 12 50 Painted, varnished or coated with plastics Other, of a thickness of: 7606 12 93 Not less than 3 mm but less than 6 mm 7606 12 99 Not less than 6 mm Other: 7606 91 00 Of aluminium, not alloyed 7606 92 00 Of aluminium alloys 7608 Aluminium tubes and pipes: 7608 10 00 Of aluminium, not alloyed: ex 7608 10 00 Other than with attached fittings, suitable for conducting gases or liquids, for use in civil aircraft 7608 20 Of aluminium alloys: 7608 20 20 Welded: ex 7608 20 20 Other than with attached fittings, suitable for conducting gases or liquids, for use in civil aircraft Other: 7608 20 89 Other: ex 7608 20 89 Other than with attached fittings, suitable for conducting gases or liquids, for use in civil aircraft 7610 Aluminium structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures: 7610 10 00 Doors, windows and their frames and thresholds for doors 7610 90 Other: 7610 90 10 Bridges and bridge-sections, towers and lattice masts 8215 Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware: Other: 8215 91 00 Plated with precious metal 8407 Spark-ignition reciprocating or rotary internal combustion piston engines: Reciprocating piston engines of a kind used for the propulsion of vehicles of Chapter 87: 8407 34 Of a cylinder capacity exceeding 1 000 cm 3 : Other: 8407 34 30 Used 8408 Compression-ignition internal combustion piston engines (diesel or semi-diesel engines): 8408 10 Marine propulsion engines: Used: 8408 10 19 Other 8408 90 Other engines: Other: 8408 90 27 Used: ex 8408 90 27 Other than for use in civil aircraft 8415 Air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated: Other: 8415 81 00 Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps): ex 8415 81 00 Other than for use in civil aircraft 8418 Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air-conditioning machines of heading 8415 : 8418 50 Other furniture (chests, cabinets, display counters, showcases and the like) for storage and display, incorporating refrigerating or freezing equipment: Refrigerated showcases and counters (incorporating a refrigerating unit or evaporator): 8418 50 11 For frozen food storage 8432 Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports-ground rollers: 8432 10 Ploughs: Harrows, scarifiers, cultivators, weeders and hoes: 8432 21 00 Disc harrows 8432 29 Other: 8432 30 Seeders, planters and transplanters: 8432 40 Manure spreaders and fertiliser distributors: 8432 80 00 Other machinery 8450 Household or laundry-type washing machines, including machines which both wash and dry: Machines, each of a dry linen capacity not exceeding 10 kg: 8450 11 Fully-automatic machines: Each of a dry linen capacity not exceeding 6 kg: 8450 11 11 Front-loading machines 8450 11 19 Top-loading machines 8501 Electric motors and generators (excluding generating sets): 8501 40 Other AC motors, single-phase: 8501 40 20 Of an output not exceeding 750 W: ex 8501 40 20 Other than for use in civil aircraft of an output exceeding 735 W 8501 40 80 Of an output exceeding 750 W: ex 8501 40 80 Other than for use in civil aircraft of an output not exceeding 150 kW Other AC motors, multi-phase: 8501 51 00 Of an output not exceeding 750 W: ex 8501 51 00 Other than for use in civil aircraft of an output exceeding 735 W 8501 52 Of an output exceeding 750 W but not exceeding 75 kW: 8501 52 20 Of an output exceeding 750 W but not exceeding 7,5 kW: ex 8501 52 20 Other than for use in civil aircraft 8501 52 30 Of an output exceeding 7,5 kW but not exceeding 37 kW: ex 8501 52 30 Other than for use in civil aircraft 8501 52 90 Of an output exceeding 37 kW but not exceeding 75 kW: ex 8501 52 90 Other than for use in civil aircraft 8501 53 Of an output exceeding 75 kW: 8501 53 50 Traction motors Other, of an output: 8501 53 81 Exceeding 75 kW but not exceeding 375 kW: ex 8501 53 81 Other than for use in civil aircraft AC generators (alternators): 8501 61 Of an output not exceeding 75 kVA: 8501 61 20 Of an output not exceeding 7,5 kVA: ex 8501 61 20 Other than for use in civil aircraft 8501 61 80 Of an output exceeding 7,5 kVA but not exceeding 75 kVA: ex 8501 61 80 Other than for use in civil aircraft 8504 Electrical transformers, static converters (for example, rectifiers) and inductors: Liquid dielectric transformers: 8504 21 00 Having a power handling capacity not exceeding 650 kVA 8504 22 Having a power handling capacity exceeding 650 kVA but not exceeding 10 000 kVA: 8504 22 10 Exceeding 650 kVA but not exceeding 1 600 kVA 8504 22 90 Exceeding 1 600 kVA but not exceeding 10 000 kVA 8504 23 00 Having a power handling capacity exceeding 10 000 kVA Other transformers: 8504 32 Having a power handling capacity exceeding 1 kVA but not exceeding 16 kVA: 8504 32 20 Measuring transformers: ex 8504 32 20 Other than for use in civil aircraft 8504 32 80 Other: ex 8504 32 80 Other than for use in civil aircraft 8504 33 00 Having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA: ex 8504 33 00 Other than for use in civil aircraft 8504 40 Static converters: Other: Other: 8504 40 55 Accumulator chargers: ex 8504 40 55 Other than for use in civil aircraft Other: 8504 40 81 Rectifiers: ex 8504 40 81 Other than for use in civil aircraft Inverters: 8504 40 88 Having a power handling capacity exceeding 7,5 kVA: ex 8504 40 88 Other than for use in civil aircraft 8504 40 90 Other: ex 8504 40 90 Other than for use in civil aircraft 8508 Vacuum cleaners: With self-contained electric motor: 8508 11 00 Of a power not exceeding 1 500 W and having a dust bag or other receptable capacity not exceeding 20 l 8508 19 00 Other 8508 70 00 Parts 8509 Electromechanical domestic appliances, with self-contained electric motor, other than vacuum cleaners of heading 8508 8516 Electric instantaneous or storage water heaters and immersion heaters; electric space-heating apparatus and soil-heating apparatus; electrothermic hairdressing apparatus (for example, hairdryers, hair curlers, curling tong heaters) and hand dryers; electric smoothing irons; other electrothermic appliances of a kind used for domestic purposes; electric heating resistors, other than those of heading 8545 : 8516 10 Electric instantaneous or storage water heaters and immersion heaters Electric space-heating apparatus and electric soil-heating apparatus: 8516 21 00 Storage heating radiators 8516 29 Other: 8516 29 50 Convection heaters Other: 8516 29 91 With built-in fan 8516 29 99 Other Electrothermic hairdressing or hand-drying apparatus: 8516 31 Hairdryers 8516 32 00 Other hairdressing apparatus 8516 33 00 Hand-drying apparatus 8516 40 Electric smoothing irons: 8516 50 00 Microwave ovens 8516 60 Other ovens; cookers, cooking plates, boiling rings; grillers and roasters Cooking plates, boiling rings and hobs: 8516 60 51 Hobs for building in 8516 60 59 Other 8516 60 70 Grillers and roasters 8516 60 80 Ovens for building in 8516 60 90 Other Other electrothermic appliances 8516 71 00 Coffee or tea makers 8516 72 00 Toasters 8516 79 Other 8517 Telephone sets, including telephones for cellular networks or for other wireless networks; other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network), other than transmission or reception apparatus of heading 8443 , 8525 , 8527 or 8528 : Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network): 8517 69 Other: Reception apparatus for radio-telephony or radio-telegraphy: 8517 69 39 Other: ex 8517 69 39 Other than for use in civil aircraft 8518 Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers; audiofrequency electric amplifiers; electric sound amplifier sets: 8518 10 Microphones and stands therefor: 8518 10 95 Other: ex 8518 10 95 Other than for use in civil aircraft 8518 30 Headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers: 8518 30 95 Other: ex 8518 30 95 Other than for use in civil aircraft 8518 40 Audio-frequency electric amplifiers: 8518 40 30 Telephonic and measurement amplifiers: ex 8518 40 30 Other than for use in civil aircraft Other: 8518 40 81 With only one channel: ex 8518 40 81 Other than for use in civil aircraft 8518 40 89 Other: ex 8518 40 89 Other than for use in civil aircraft 8518 90 00 Parts 8521 Video recording or reproducing apparatus, whether or not incorporating a video tuner: 8521 90 00 Other 8525 Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and video camera recorders: 8525 50 00 Transmission apparatus 8527 Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock 8528 Monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus: Cathode-ray tube monitors: 8528 49 Other Other monitors: 8528 59 Other Projectors: 8528 69 Other: Reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus: 8528 71 Not designed to incorporate a video display or screen: 8528 72 Other, colour: 8528 72 10 Television projection equipment 8528 72 20 Apparatus incorporating a video recorder or reproducer Other: With integral tube: With a screen width/height ratio less than 1,5, with a diagonal measurement of the screen: 8528 72 31 Not exceeding 42 cm 8528 72 33 Exceeding 42 cm but not exceeding 52 cm 8528 72 39 Exceeding 72 cm Other: With scanning parameters not exceeding 625 lines, with a diagonal measurement of the screen: 8528 72 51 Not exceeding 75 cm 8528 72 59 Exceeding 75 cm 8528 72 75 With scanning parameters exceeding 625 lines Other: 8528 72 91 With a screen width/height ratio less than 1,5 8528 72 99 Other 8528 73 00 Other, black and white or other monochrome 8529 Parts suitable for use solely or principally with the apparatus of headings 8525 to 8528 : 8529 10 Aerials and aerial reflectors of all kinds; parts suitable for use therewith: Aerials: Outside aerials for radio or television broadcast receivers: 8529 10 31 For reception via satellite 8529 10 65 Inside aerials for radio or television broadcast receivers, including built-in types: ex 8529 10 65 Other than for use in civil aircraft 8529 10 69 Other: ex 8529 10 69 Other than for use in civil aircraft 8529 10 80 Aerial filters and separators: ex 8529 10 80 Other than for use in civil aircraft 8529 10 95 Other: ex 8529 10 95 Other than for use in civil aircraft 8539 Electric filament or discharge lamps, including sealed beam lamp units and ultraviolet or infra-red lamps; arc lamps: Other filament lamps, excluding ultraviolet or infra-red lamps: 8539 21 Tungsten halogen 8539 22 Other, of a power not exceeding 200 W and for a voltage exceeding 100 V 8539 29 Other Discharge lamps, other than ultraviolet lamps 8539 31 Fluorescent, hot cathode 8544 Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors: 8544 20 00 Coaxial cable and other coaxial electric conductors Other electric conductors, for a voltage not exceeding 1 000 V: 8544 42 Fitted with connectors: 8544 42 90 Other 8544 49 Other: Other: 8544 49 91 Wire and cables, with individual conductor wires of a diameter exceeding 0,51 mm Other: 8544 49 93 For a voltage not exceeding 80 V 8544 49 95 For a voltage exceeding 80 V but less than 1 000 V 8544 49 99 For a voltage of 1 000 V 8544 60 Other electric conductors, for a voltage exceeding 1 000 V 8701 Tractors (other than tractors of heading 8709 ): 8701 10 00 Pedestrian-controlled tractors 8701 20 Road tractors for semi-trailers: 8701 20 90 Used 8701 30 Track-laying tractors: 8701 30 90 Other 8701 90 Other: Agricultural tractors (excluding pedestrian-controlled tractors) and forestry tractors, wheeled: New, of an engine power: 8701 90 11 Not exceeding 18 kW 8701 90 20 Exceeding 18 kW but not exceeding 37 kW 8701 90 25 Exceeding 37 kW but not exceeding 59 kW 8701 90 31 Exceeding 59 kW but not exceeding 75 kW 8701 90 50 Used 8702 Motor vehicles for the transport of ten or more persons, including the driver: 8702 10 With compression-ignition internal combustion piston engine (diesel or semidiesel): 8702 90 Other: With spark-ignition internal combustion piston engine: Of a cylinder capacity exceeding 2 800 cm 3 : 8702 90 11 New 8702 90 19 Used Of a cylinder capacity not exceeding 2 800 cm 3 : 8702 90 31 New 8702 90 39 Used 8703 Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading 8702 ), including station wagons and racing cars: Other vehicles, with spark-ignition internal combustion reciprocating piston engine: 8703 21 Of a cylinder capacity not exceeding 1 000 cm 3 : 8703 21 10 New: ex 8703 21 10 Other than of first or of second degree of disassemble 8703 21 90 Used 8703 24 Of a cylinder capacity exceeding 3 000 cm 3 : 8703 24 10 New: ex 8703 24 10 Other than of first or of second degree of disassemble 8703 24 90 Used Other vehicles, with compression-ignition internal combustion piston engine (diesel or semi-diesel): 8703 31 Of a cylinder capacity not exceeding 1 500 cm 3 : 8703 31 10 New: ex 8703 31 10 Other than of first or of second degree of disassemble 8703 31 90 Used 8703 33 Of a cylinder capacity exceeding 2 500 cm 3 : New: 8703 33 19 Other: ex 8703 33 19 Other than of first or of second degree of disassemble 8703 33 90 Used 8704 Motor vehicles for the transport of goods: Other, with compression-ignition internal combustion piston engine (diesel or semidiesel): 8704 21 Of a gross vehicle weight not exceeding 5 tonnes: Other: With engines of a cylinder capacity exceeding 2 500 cm 3 : 8704 21 31 New: ex 8704 21 31 Other than of first or of second degree of disassemble 8704 21 39 Used With engines of a cylinder capacity not exceeding 2 500 cm 3 : 8704 21 91 New: ex 8704 21 91 Other than of first or of second degree of disassemble 8704 21 99 Used 8704 22 Of a gross vehicle weight exceeding 5 tonnes but not exceeding 20 tonnes: Other: 8704 22 91 New: ex 8704 22 91 Other than of first or of second degree of disassemble 8704 22 99 Used 8704 23 Of a gross vehicle weight exceeding 20 tonnes: Other: 8704 23 91 New: ex 8704 23 91 Other than of first or of second degree of disassemble 8704 23 99 Used Other, with spark-ignition internal combustion piston engine: 8704 31 Of a gross vehicle weight not exceeding 5 tonnes: Other: With engines of a cylinder capacity exceeding 2 800 cm 3 : 8704 31 31 New: ex 8704 31 31 Other than of first or of second degree of disassemble 8704 31 39 Used With engines of a cylinder capacity not exceeding 2 800 cm 3 : 8704 31 91 New: ex 8704 31 91 Other than of first or of second degree of disassemble 8704 31 99 Used 8704 32 Of a gross vehicle weight exceeding 5 tonnes: Other: 8704 32 91 New: ex 8704 32 91 Other than of first or of second degree of disassemble 8704 32 99 Used 8704 90 00 Other 8705 Special purpose motor vehicles, other than those principally designed for the transport of persons or goods (for example, breakdown lorries, crane lorries, fire fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile workshops, mobile radiological units): 8705 30 00 Fire fighting vehicles 8705 40 00 Concrete-mixer lorries 8712 00 Bicycles and other cycles (including delivery tricycles), not motorised 9301 Military weapons, other than revolvers, pistols and the arms of heading 9307 9302 00 00 Revolvers and pistols, other than those of heading 9303 or 9304 9303 Other firearms and similar devices which operate by the firing of an explosive charge (for example, sporting shotguns and rifles, muzzle-loading firearms, Very pistols and other devices designed to project only signal flares, pistols and revolvers for firing blank ammunition, captive-bolt humane killers, line-throwing guns) 9304 00 00 Other arms (for example, spring, air or gas guns and pistols, truncheons), excluding those of heading 9307 9305 Parts and accessories of articles of headings 9301 to 9304 9306 Bombs, grenades, torpedoes, mines, missiles and similar munitions of war and parts thereof; cartridges and other ammunition and projectiles and parts thereof, including shot and cartridge wads 9307 00 00 Swords, cutlasses, bayonets, lances and similar arms and parts thereof and scabbards and sheaths therefor 9401 Seats (other than those of heading 9402 ), whether or not convertible into beds, and parts thereof: 9401 30 Swivel seats with variable height adjustment: 9401 30 90 Other 9401 40 00 Seats other than garden seats or camping equipment, convertible into beds Seats of cane, osier, bamboo or similar materials: 9401 51 00 Of bamboo or rattan 9401 59 00 Other Other seats, with wooden frames: 9401 61 00 Upholstered 9401 69 00 Other Other seats, with metal frames: 9401 71 00 Upholstered 9401 79 00 Other 9401 90 Parts: Other: 9401 90 30 Of wood 9403 Other furniture and parts thereof: 9403 30 Wooden furniture of a kind used in offices 9403 40 Wooden furniture of a kind used in the kitchen 9403 50 00 Wooden furniture of a kind used in the bedroom 9403 60 Other wooden furniture 9403 90 Parts: 9403 90 30 Of wood 9403 90 90 Of other materials 9404 Mattress supports; articles of bedding and similar furnishing (for example, mattresses, quilts, eiderdowns, cushions, pouffes and pillows) fitted with springs or stuffed or internally fitted with any material or of cellular rubber or plastics, whether or not covered: Mattresses: 9404 29 Of other materials 9406 00 Prefabricated buildings: 9406 00 11 Mobile homes Other: 9406 00 20 Of wood 9503 00 Tricycles, scooters, pedal cars and similar wheeled toys; dolls’ carriages; dolls; other toys; reduced-size (scale) models and similar recreational models, working or not; puzzles of all kinds: 9503 00 10 Tricycles, scooters, pedal cars and similar toys; dolls’ carriages: ex 9503 00 10 Dolls’ carriages Other construction sets and constructional toys: 9503 00 39 Of other materials: ex 9503 00 39 Of wood Toys representing animals or non-human creatures: 9503 00 49 Other: ex 9503 00 49 Of wood Puzzles: 9503 00 61 Of wood 9504 Articles for funfair, table or parlour games, including pintables, billiards, special tables for casino games and automatic bowling alley equipment: 9504 20 Articles and accessories for billiards of all kinds: 9504 20 10 Billiard tables (with or without legs) 9506 Articles and equipment for general physical exercise, gymnastics, athletics, other sports (including table-tennis) or outdoor games, not specified or included elsewhere in this chapter; swimming pools and paddling pools: Balls, other than golf balls and table-tennis balls: 9506 62 Inflatable: 9506 62 90 Other 9601 Worked ivory, bone, tortoiseshell, horn, antlers, coral, mother-of-pearl and other animal carving material, and articles of these materials (including articles obtained by moulding) 9603 Brooms, brushes (including brushes constituting parts of machines, appliances or vehicles), hand-operated mechanical floor sweepers, not motorised, mops and feather dusters; prepared knots and tufts for broom or brush making; paint pads and rollers; squeegees (other than roller squeegees): 9603 10 00 Brooms and brushes, consisting of twigs or other vegetable materials bound together, with or without handles 9603 90 Other: 9604 00 00 Hand sieves and hand riddles 9609 Pencils (other than pencils of heading 9608 ), crayons, pencil leads, pastels, drawing charcoals, writing or drawing chalks and tailors’ chalks 9612 Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxes: 9612 20 00 Ink-pads 9618 00 00 Tailors’ dummies and other lay figures; automata and other animated displays used for shop window dressing
ANNEX II DEFINITION OF ‘BABY BEEF’ PRODUCTS referred to in Article 26(3) Notwithstanding the rules for the interpretation of the Combined Nomenclature, the wording for the description of the products is to be considered as having no more than an indicative value, the preferential scheme being determined, within the context of this Annex, by the coverage of the CN codes. Where ex CN codes are indicated, the preferential scheme is to be determined by application of the CN code and corresponding description taken together. CN code TARIC subdivision Description 0102 Live bovine animals: 0102 90 Other: Domestic species: Of a weight exceeding 300 kg: Heifers (female bovines that have never calved): ex 0102 90 51 For slaughter: 10 Not yet having any permanent teeth, of a weight of 320 kg or more but not exceeding 470 kg ( 1 ) ex 0102 90 59 Other: 11 21 31 91 Not yet having any permanent teeth, of a weight of 320 kg or more but not exceeding 470 kg ( 1 ) Other: ex 0102 90 71 For slaughter: 10 Bulls and steers not yet having permanent teeth, of a weight of 350 kg or more but not exceeding 500 kg ( 1 ) ex 0102 90 79 Other: 21 91 Bulls and steers not yet having permanent teeth, of a weight of 350 kg or more but not exceeding 500 kg ( 1 ) 0201 Meat of bovine animals, fresh or chilled: ex 0201 10 00 Carcases and half-carcases 91 Carcases of a weight of 180 kg or more but not exceeding 300 kg, and half carcases of a weight of 90 kg or more but not exceeding 150 kg, with a low degree of ossification of the cartilages (in particular those of the symphysis pubis and the vertebral apophyses), the meat of which is a light pink colour and the fat of which, of extremely fine texture, is white to light yellow in colour ( 1 ) 0201 20 Other cuts with bone in: ex 0201 20 20 ‘Compensated’ quarters: 91 ‘Compensated’ quarters of a weight of 90 kg or more but not exceeding 150 kg, with a low degree of ossification of the cartilages (in particular those of the symphysis pubis and the vertebral apophyses), the meat of which is a light pink colour and the fat of which, of extremely fine texture, is white to light yellow in colour ( 1 ) ex 0201 20 30 Unseparated or separated forequarters: 91 Separated forequarters, of a weight of 45 kg or more but not exceeding 75 kg, with a low degree of ossification of the cartilages (in particular those of the vertebral apophyses), the meat of which is a light pink colour and the fat of which, of extremely fine texture, is white to light yellow in colour ( 1 ) ex 0201 20 50 Unseparated or separated hindquarters: 91 Separated hindquarters of a weight of 45 kg or more but not exceeding 75 kg (but 38 kg or more and not exceeding 68 kg in the case of ‘Pistola’ cuts), with a low degree of ossification of the cartilages (in particular those of the vertebral apophyses), the meat of which is a light pink colour and the fat of which, of extremely fine texture, is white to light yellow in colour ( 1 ) ( 1 ) Entry under this subheading is subject to conditions laid down in the relevant Community provisions.
ANNEX IV COMMUNITY CONCESSIONS FOR SERBIAN FISHERY PRODUCTS Referred to in Article 29(2) Imports into the Community of the following products originating in Serbia shall be subject to the concessions set out below. CN code Description From entry into force of the agreement until 31 December of same year (n) From 1 January to 31 December (n+1) For every year thereafter, from 1 January to 31 December 0301 91 10 Trout ( Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster ): live; fresh or chilled; frozen; dried, salted or in brine, smoked; fillets and other fish meat; flours, meals and pellets, fit for human consumption TQ: 15 t at 0 % Over the TQ: 90 % of MFN duty TQ: 15 t at 0 % Over the TQ: 80 % of MFN duty TQ: 15 t at 0 % Over the TQ: 70 % of MFN duty 0301 91 90 0302 11 10 0302 11 20 0302 11 80 0303 21 10 0303 21 20 0303 21 80 0304 19 15 0304 19 17 ex 0304 19 19 ex 0304 19 91 0304 29 15 0304 29 17 ex 0304 29 19 ex 0304 99 21 ex 0305 10 00 ex 0305 30 90 0305 49 45 ex 0305 59 80 ex 0305 69 80 0301 93 00 Carp: live; fresh or chilled; frozen; dried, salted or in brine, smoked; fillets and other fish meat; flours, meals and pellets, fit for human consumption TQ: 60 t at 0 % Over the TQ: 90 % of MFN duty TQ: 60 t at 0 % Over the TQ: 80 % of MFN duty TQ: 60 t at 0 % Over the TQ: 70 % of MFN duty 0302 69 11 0303 79 11 ex 0304 19 19 ex 0304 19 91 ex 0304 29 19 ex 0304 99 21 ex 0305 10 00 ex 0305 30 90 ex 0305 49 80 ex 0305 59 80 ex 0305 69 80 The duty rate applicable to all products of HS subheading 1604 will be reduced according to the following timetable: Year Year 1 (duty %) Year 3 (duty %) Year 5 and subsequent years (duty %) Duty 90 % of MFN 80 % of MFN 70 % of MFN
ANNEX V SERBIAN CONCESSIONS FOR COMMUNITY FISHERY PRODUCTS Referred to in Article 30(2) Imports into Serbia of the following products originating in the Community shall be subject to the concessions set out below. CN code Description Rate of duty (% of MFN) 2008 2009 2010 2011 2012 2013 and following years 0301 Live fish: Other live fish: 0301 91 Trout ( Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster ): 0301 91 90 Other 90 75 60 40 20 0 0301 92 00 Eels ( Anguilla spp.) 90 75 60 40 20 0 0301 93 00 Carp 90 85 80 75 65 60 0301 99 Other: Freshwater fish: 0301 99 11 Pacific salmon ( Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus ), Atlantic salmon ( Salmo salar ) and Danube salmon ( Hucho hucho ) 90 75 60 40 20 0 0301 99 19 Other 90 75 60 40 20 0 0302 Fish, fresh or chilled, excluding fish fillets and other fish meat of heading 0304 : Salmonidae, excluding livers and roes: 0302 11 Trout ( Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster ): 0302 11 10 Of the species Oncorhynchus apache or Oncorhynchus chrysogaster 90 75 60 40 20 0 0302 11 20 Of the species Oncorhynchus mykiss , with heads and gills on, gutted, weighing more than 1,2 kg each, or with heads off, gilled and gutted, weighing more than 1 kg each 90 75 60 40 20 0 0302 11 80 Other 90 75 60 40 20 0 0302 19 00 Other 90 75 60 40 20 0 Tunas (of the genus Thunnus ), skipjack or stripe-bellied bonito ( Euthynnus ( Katsuwonus ) pelamis ), excluding livers and roes: 0302 33 Skipjack or stripe-bellied bonito: 0302 33 90 Other 90 75 60 40 20 0 Other fish, excluding livers and roes: 0302 69 Other: Freshwater fish: 0302 69 11 Carp 90 75 60 40 20 0 0302 69 19 Other 90 75 60 40 20 0 0302 70 00 Livers and roes 90 75 60 40 20 0 0303 Fish, frozen, excluding fish fillets and other fish meat of heading 0304 : Other salmonidae, excluding livers and roes: 0303 21 Trout ( Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster ) 90 75 60 40 20 0 0303 29 00 Other 90 75 60 40 20 0 Flat fish ( Pleuronectidae, Bothidae, Cynoglossidae, Soleidae, Scophthalmidae and Citharidae ), excluding livers and roes: 0303 39 Other 90 75 60 40 20 0 Tunas (of the genus Thunnus ), skipjack or stripe-bellied bonito ( Euthynnus ( Katsuwonus ) pelamis ), excluding livers and roes: 0303 43 Skipjack or stripe-bellied bonito 90 75 60 40 20 0 0303 49 Other 90 75 60 40 20 0 Swordfish ( Xiphias gladius ) and toothfish ( Dissostichus spp.), excluding livers and roes: 0303 61 00 Swordfish ( Xiphias gladius ) 90 75 60 40 20 0 0303 62 00 Toothfish ( Dissostichus spp.) 90 75 60 40 20 0 Other fish, excluding livers and roes: 0303 74 Mackerel ( Scomber scombrus, Scomber australasicus, Scomber japonicus ) 90 75 60 40 20 0 0303 79 Other 90 75 60 40 20 0 0303 80 Livers and roes 90 75 60 40 20 0 0304 Fish fillets and other fish meat (whether or not minced), fresh, chilled or frozen: Fresh or chilled: 0304 11 Swordfish ( Xiphias gladius ) 90 75 60 40 20 0 0304 12 Toothfish ( Dissostichus spp.) 90 75 60 40 20 0 0304 19 Other: Fillets: Of freshwater fish: 0304 19 13 Of Pacific salmon ( Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus ), Atlantic salmon ( Salmo salar ) and Danube salmon ( Hucho hucho ) 90 75 60 40 20 0 Of trout of the species Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita and Oncorhynchus gilae : 0304 19 15 Of the species Oncorhynchus mykiss weighing more than 400 g each 90 75 60 40 20 0 0304 19 17 Other 90 75 60 40 20 0 0304 19 19 Of other freshwater fish 90 75 60 40 20 0 Other: 0304 19 31 Of cod ( Gadus morhua, Gadus ogac, Gadus macrocephalus ) and of fish of the species Boreogadus saida 90 75 60 40 20 0 0304 19 33 Of coalfish ( Pollachius virens ) 90 75 60 40 20 0 0304 19 35 Of redfish ( Sebastes spp.) 90 75 60 40 20 0 Other fish meat (whether or not minced): 0304 19 91 Of freshwater fish 90 75 60 40 20 0 Other: 0304 19 97 Flaps of herring 90 75 60 40 20 0 0304 19 99 Other 90 75 60 40 20 0 Frozen fillets: 0304 21 00 Swordfish ( Xiphias gladius ) 90 75 60 40 20 0 0304 22 00 Toothfish ( Dissostichus spp.) 90 75 60 40 20 0 0304 29 Other 90 75 60 40 20 0 Other: 0304 91 00 Swordfish ( Xiphias gladius ) 90 75 60 40 20 0 0304 92 00 Toothfish ( Dissostichus spp.) 90 75 60 40 20 0 0304 99 Other 90 75 60 40 20 0 0305 Fish, dried, salted or in brine; smoked fish, whether or not cooked before or during the smoking process; flours, meals and pellets of fish, fit for human consumption 90 75 60 40 20 0 0306 Crustaceans, whether in shell or not, live, fresh, chilled, frozen, dried, salted or in brine; crustaceans, in shell, cooked by steaming or by boiling in water, whether or not chilled, frozen, dried, salted or in brine; flours, meals and pellets of crustaceans, fit for human consumption: Frozen: 0306 13 Shrimps and prawns 90 75 60 40 20 0 0306 14 Crabs 90 75 60 40 20 0 0306 19 Other, including flours, meals and pellets of crustaceans, fit for human consumption 90 75 60 40 20 0 Not frozen: 0306 23 Shrimps and prawns 90 75 60 40 20 0 0306 24 Crabs 90 75 60 40 20 0 0306 29 Other, including flours, meals and pellets of crustaceans, fit for human consumption 90 75 60 40 20 0 0307 Molluscs, whether in shell or not, live, fresh, chilled, frozen, dried, salted or in brine; aquatic invertebrates other than crustaceans and molluscs, live, fresh, chilled, frozen, dried, salted or in brine; flours, meals and pellets of aquatic invertebrates other than crustaceans, fit for human consumption: Mussels ( Mytilus spp., Perna spp.): 0307 31 Live, fresh or chilled 90 75 60 40 20 0 0307 39 Other 90 75 60 40 20 0 Cuttle fish ( Sepia officinalis, Rossia macrosoma, Sepiola spp.) and squid ( Ommastrephes spp., Loligo spp., Nototodarus spp., Sepioteuthis spp.): 0307 41 Live, fresh or chilled 90 75 60 40 20 0 0307 49 Other 90 75 60 40 20 0 Octopus ( Octopus spp.): 0307 51 00 Live, fresh or chilled 90 75 60 40 20 0 0307 59 Other 90 75 60 40 20 0 0307 60 00 Snails, other than sea snails 90 75 60 40 20 0 Other, including flours, meals and pellets of aquatic invertebrates other than crustaceans, fit for human consumption: 0307 91 00 Live, fresh or chilled 90 75 60 40 20 0 0307 99 Other 90 75 60 40 20 0 1604 Prepared or preserved fish; caviar and caviar substitutes prepared from fish eggs 90 75 60 40 20 0 1605 Crustaceans, molluscs and other aquatic invertebrates, prepared or preserved 90 75 60 40 20 0 1902 Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared: 1902 20 Stuffed pasta, whether or not cooked or otherwise prepared: 1902 20 10 Containing more than 20 % by weight of fish, crustaceans, molluscs or other aquatic invertebrates 90 75 60 40 20 15
ANNEX VI ESTABLISHMENT: FINANCIAL SERVICES Referred to in Title V, Chapter II FINANCIAL SERVICES: DEFINITIONS A financial service is any service of a financial nature offered by a financial service provider of a Party. Financial services include the following activities: A. All insurance and insurance-related services: 1. direct insurance (including co-insurance): (i) life; (ii) non-life; 2. reinsurance and retrocession; 3. insurance intermediation, such as brokerage and agency; 4. services auxiliary to insurance, such as consultancy, actuarial, risk assessment and claim settlement services; B. Banking and other financial services (excluding insurance): 1. acceptance of deposits and other repayable funds from the public; 2. lending of all types, including, inter alia, consumer-credit, mortgage credit, factoring and financing of commercial transaction; 3. financial leasing; 4. all payment and money transmission services, including credit, charge and debit cards, travellers cheques and bankers draft; 5. guarantees and commitments; 6. trading for own account or for account of customers, whether on an exchange, in an over the counter market or otherwise, the following: (a) money market instruments (cheques, bills, certificates of deposits, etc.); (b) foreign exchange; (c) derivative products including, but not limited to, futures and options; (d) exchange rates and interest rate instruments, including products such as swaps, forward rate agreements, etc.; (e) transferable securities; (f) other negotiable instruments and financial assets, including bullion; 7. participation in issues of all kinds of securities, including underwriting and placement as agent (whether publicly or privately) and provision of services related to such issues; 8. money broking; 9. asset management, such as cash or portfolio management, all forms of collective investment management, pension-fund management, custodial, depository and trust services; 10. settlement and clearing services for financial assets, including securities, derivative products, and other negotiable instruments; 11. provision and transfer of financial information, and financial data processing and related software by providers of other financial services; 12. advisory, intermediation and other auxiliary financial services on all the activities listed in points 1 to 11 above, including credit reference and analysis, investment and portfolio research and advice, advice on acquisitions and on corporate restructuring and strategy. The following activities are excluded from the definition of financial services: (a) activities carried out by central banks or by any other public institution in pursuit of monetary and exchange rate policies; (b) activities conducted by central banks, government agencies or departments, or public institutions, for the account or with the guarantee of the government, except when those activities may be carried out by financial service providers in competition with such public entities; (c) activities forming part of a statutory system of social security or public retirement plans, except when those activities may be carried by financial service providers in competition with public entities or private institutions.
ANNEX VII INTELLECTUAL, INDUSTRIAL AND COMMERCIAL PROPERTY RIGHTS Referred to in Article 75 1. Article 75(4) of this Agreement concerns the following Multilateral Conventions to which Member States are Parties, or which are de facto applied by Member States: — Patent Law Treaty (Geneva, 2000); — International Convention for the Protection of New Varieties of Plants (UPOV Convention, Paris, 1961, as revised in 1972, 1978 and 1991). 2. The Parties confirm the importance they attach to the obligations arising from the following Multilateral Conventions: — Convention establishing the World Intellectual Property Organization (WIPO Convention, Stockholm, 1967, as amended in 1979); — Berne Convention for the Protection of Literary and Artistic Works (Paris Act, 1971); — Brussels Convention Relating to the Distribution of Programme-Carrying Signals Transmitted by Satellite (Brussels, 1974); — Budapest Treaty on the International Recognition of the Deposit of Microorganisms for the Purposes of Patent Procedure (Budapest, 1977, as amended in 1980); — Hague Agreement Concerning the International Deposit of Industrial Designs (London Act, 1934 and The Hague Act, 1960); — Locarno Agreement Establishing an International Classification for Industrial Designs (Locarno, 1968, as amended in 1979); — Madrid Agreement concerning the International Registration of Marks (Stockholm Act, 1967 and amended in 1979); — Protocol Relating to the Madrid Agreement Concerning the International Registration of Marks (Madrid Protocol, 1989); — Nice Agreement concerning the International Classification of Goods and Services for the purposes of the Registration of Marks (Geneva, 1977 and amended in 1979); — Paris Convention for the Protection of Industrial Property (Stockholm Act, 1967 and amended in 1979); — Patent Cooperation Treaty (Washington, 1970, as amended in 1979 and modified in 1984); — Convention for the Protection of Producers of Phonograms against Unauthorised Duplications of their Phonograms (Phonograms Convention, Geneva, 1971); — International Convention for the Protection of Performers, Producers of Phonograms and Broadcasting Organizations (Rome Convention, 1961); — Strasbourg Agreement Concerning the International Patent Classification (Strasbourg, 1971, as amended in 1979); — Trademark Law Treaty (Geneva, 1994); — Vienna Agreement Establishing an International Classification of the Figurative Elements of Marks (Vienna, 1973, as amended in 1985); — WIPO Copyright Treaty (Geneva, 1996); — WIPO Performances and Phonograms Treaty (Geneva, 1996); — The European Patent Convention; — WTO Agreement on Trade-Related Aspects of Intellectual Property Rights.
Social cooperation
With regard to employment, cooperation between the Parties shall focus notably on upgrading job-finding and careers advice services, providing back-up measures and promoting local development to assist industrial and labour market restructuring. It shall also include measures such as studies, the secondment of experts and information and training operations. The Parties shall cooperate to facilitate the reform of the employment policy in Serbia, in the context of strengthened economic reform and integration. Cooperation shall also seek to support the adaptation of the Serbian social security system to the new economic and social requirements, and shall involve the adjustment of the legislation in Serbia concerning working conditions and equal opportunities for women and men, for people with disabilities and for people belonging to minority and other vulnerable groups as well as the improvement of the level of protection of the health and safety of workers, taking as a reference the level of protection existing in the Community. Cooperation shall take due account of priority areas related to the Community acquis in this field.
Education and training
The Parties shall cooperate with the aim of raising the level of general education and vocational education and training in Serbia as well as youth policy and youth work, including non-formal education. A priority for higher education systems shall be the achievement of the objectives of the Bologna Declaration in the intergovernmental Bologna process. The Parties shall also cooperate with the aim of ensuring that access to all levels of education and training in Serbia is free of discrimination on the grounds of gender, colour, ethnic origin or religion. The relevant Community programmes and instruments shall contribute to the upgrading of educational and training structures and activities in Serbia. Cooperation shall take due account of priority areas related to the Community acquis in this field.
Cultural cooperation
The Parties undertake to promote cultural cooperation. This cooperation serves, inter alia, to raise mutual understanding and esteem between individuals, communities and peoples. The Parties also undertake to cooperate to promote cultural diversity, notably within the framework of the Unesco Convention on the protection and the promotion of the diversity of cultural expressions.
Cooperation in the audiovisual field
The Parties shall cooperate to promote the audiovisual industry in Europe and encourage co-production in the fields of cinema and television. Cooperation could include, inter alia, programmes and facilities for the training of journalists and other media professionals, as well as technical assistance to the media, the public and private, so as to reinforce their independence, professionalism and links with European media. Serbia shall align its policies on the regulation of content aspects of cross-border broadcasting with those of the EC and shall harmonise its legislation with the EU acquis . Serbia shall pay particular attention to matters relating to the acquisition of intellectual property rights for programmes and broadcast by satellite, cable and terrestrial frequencies.
Information society
Cooperation shall be developed in all areas related to the Community acquis regarding the information society. It shall mainly support Serbia’s gradual alignment of policies and legislation in this sector with those of the Community. The Parties shall also cooperate with a view to further developing the Information Society in Serbia Global objectives will be preparing society as a whole for the digital age, attracting investments and ensuring the interoperability of networks and services.
Electronic communications networks and services
Cooperation shall primarily focus on priority areas related to the Community acquis in this field. The Parties shall, in particular, strengthen cooperation in the area of electronic communications networks and electronic communications services, with the ultimate objective of the adoption by Serbia of the Community acquis in the sector three years after the entry into force of this Agreement.
Information and communication
The Community and Serbia shall take the measures necessary to stimulate the mutual exchange of information. Priority shall be given to programmes aimed at providing the general public with basic information about the Community and professional circles in Serbia with more specialised information.
Transport
Cooperation between the Parties shall focus on priority areas related to the Community acquis in the field of transport. Cooperation may notably aim at restructuring and modernising the Serbian transport modes, improving the free movement of passengers and goods, enhancing the access to the transport market and facilities, including ports and airports. Furthermore cooperation may support the development of multi-modal infrastructures in connection with the main Trans-European networks, notably to reinforce regional links in South East Europe in line with the Memorandum of Understanding on the development of the Core Regional Transport Network. The objective of the cooperation should be to achieve operating standards comparable to those in the Community as well as to develop a transport system in Serbia compatible and aligned with the Community system and improving protection of the environment in transport.
Energy
Cooperation shall focus on priority areas related to the Community acquis in the field of energy. It shall be based on the Treaty establishing the Energy Community, and it shall be developed with a view to the gradual integration of Serbia into Europe’s energy markets. Cooperation may include in particular: (a) the formulation and planning of energy policy, including modernisation of infrastructure, improvement and diversification of supply and improvement of access to the energy market, including facilitation of transit, transmission and distribution and restoration of energy interconnections of regional importance with neighbouring countries; (b) the promotion of energy saving, energy efficiency, renewable energy and studying the environmental impact of energy production and consumption; (c) the formulation of framework conditions for restructuring of energy companies and cooperation between undertakings in this sector.
Nuclear Safety
The Parties shall cooperate in the field of nuclear safety and safeguards. Cooperation could cover the following topics: (a) upgrading the laws and regulations of the Parties on radiation protection, nuclear safety and nuclear materials accountancy and control as well as strengthening the supervisory authorities and their resources; (b) encouraging the promotion of Agreements between Member States, or European Atomic Energy Community and Serbia on early notification and exchange of information in cases of nuclear accidents and on emergency preparedness and on nuclear safety issues in general, if appropriate; (c) nuclear third party liability.
Environment
The Parties shall develop and strengthen their cooperation in the environmental field with the vital task of halting further degradation and start improving the environmental situation with the aim of sustainable development. The parties shall, in particular, establish cooperation with the aim of strengthening administrative structures and procedures to ensure strategic planning of environment issues and coordination between relevant actors and shall focus on the alignment of Serbia’s legislation to the Community acquis . Cooperation could also centre on the development of strategies to significantly reduce local, regional and trans-boundary air and water pollution, to establish a framework for efficient, clean, sustainable and renewable production and consumption of energy, and to execute environmental impact assessment and strategic environmental assessment. Special attention shall be paid to the implementation of the Kyoto Protocol.
Cooperation in research and technological development
The Parties shall encourage cooperation in civil scientific research and technological development (RTD) on the basis of mutual benefit and, taking into account the availability of resources, adequate access to their respective programmes, subject to appropriate levels of effective protection of intellectual, industrial and commercial property rights (IPR). Cooperation shall take due account of the priority areas related to the Community acquis in the field of research and technical development.
Regional and local development
The Parties shall seek to strengthen regional and local development cooperation, with the objective of contributing to economic development and reducing regional imbalances. Specific attention shall be given to cross-border, trans-national and interregional cooperation. Cooperation shall take due account of the priority areas related to the Community acquis in the field of regional development.
Public administration
Cooperation shall aim at ensuring the development of an efficient and accountable public administration in Serbia, notably to support rule of law implementation, the proper functioning of the state institutions for the benefit of the entire population of Serbia as a whole and the smooth development of the relations between the EU and Serbia. Cooperation in this area shall mainly focus on institution building, including the development and implementation of transparent and impartial recruitment procedures, human resources management, and career development for the public service, continued training and the promotion of ethics within the public administration. Cooperation shall cover all levels of public administration, including local administration.
In order to achieve the objectives of this Agreement and in accordance with Articles 5, 116 and 118, Serbia may receive financial assistance from the Community in the forms of grants and loans, including loans from the European Investment Bank. Community aid is conditional on further progress in satisfying the Copenhagen political criteria and in particular progress in meeting the specific priorities of the European Partnership. Account shall also be taken of the results of the annual reviews of the countries of the Stabilisation and Association process, in particular as regards the recipients’ undertaking to carry out democratic, economic and institutional reforms and of other Council conclusions, pertaining in particular to the respect of adjustment programmes. Aid granted to Serbia shall be geared to observed needs, agreed priorities, the capacity to absorb and repay, and the measures taken to reform and restructure the economy.
Financial assistance, in the form of grants, shall be covered by the operation measures provided for in the relevant Council Regulation within a multiannual indicative planning document with annual reviews, established by the Community following consultations with Serbia. Financial assistance may cover all sectors of cooperation, paying particular attention to Justice, Freedom and Security, approximation of legislation, sustainable development and poverty reduction and environmental protection.
At the request of Serbia and in case of special need, the Community could examine in coordination with international financial institutions, the possibility of granting on an exceptional basis macro-financial assistance subject to certain conditions and taking into account the availability of all financial resources. This assistance would be released subject to the fulfilment of conditions to be established in the context of a programme agreed between Serbia and the International Monetary Fund.
In order to permit optimum use of the resources available, the Parties shall ensure that Community contributions are made in close coordination with those from other sources such as the Member States, other countries and international financial institutions. To this effect, information on all sources of assistance shall be exchanged regularly between the Parties.
A Stabilisation and Association Council is hereby established which shall supervise the application and implementation of this Agreement. It shall meet at an appropriate level at regular intervals and when circumstances require. It shall examine any major issues arising within the framework of this Agreement and any other bilateral or international issues of mutual interest.
1. The Stabilisation and Association Council shall consist of the members of the Council of the European Union and members of the European Commission, on the one hand, and of members of the Government of Serbia on the other. 2. The Stabilisation and Association Council shall establish its rules of procedure. 3. The members of the Stabilisation and Association Council may arrange to be represented, in accordance with the conditions to be laid down in its rules of procedure. 4. The Stabilisation and Association Council shall be chaired in turn by a representative of the Community and a representative of Serbia, in accordance with the provisions to be laid down in its rules of procedure. 5. In matters that concern it, the European Investment Bank shall take part, as an observer, in the work of the Stabilisation and Association Council.
The Stabilisation and Association Council shall, for the purpose of attaining the objectives of this Agreement, have the power to take decisions within the scope of this Agreement in the cases provided for therein. The decisions taken shall be binding on the Parties, which shall take the measures necessary to implement the decisions taken. The Stabilisation and Association Council may also make appropriate recommendations. It shall draw up its decisions and recommendations by agreement between the Parties.
1. The Stabilisation and Association Council shall be assisted in the performance of its duties by a Stabilisation and Association Committee, composed of representatives of the Council of the European Union and of representatives of the European Commission, on the one hand, and of representatives of the Government of Serbia on the other. 2. In its rules of procedure the Stabilisation and Association Council shall determine the duties of the Stabilisation and Association Committee, which shall include the preparation of meetings of the Stabilisation and Association Council, and shall determine how the Committee shall function. 3. The Stabilisation and Association Council may delegate to the Stabilisation and Association Committee any of its powers. In this event the Stabilisation and Association Committee shall take its decisions in accordance with the conditions laid down in Article 121.
The Stabilisation and Association Committee may create subcommittees. Before the end of the first year after the date of entry into force of this Agreement, the Stabilisation and Association Committee shall set up the necessary subcommittees for the adequate implementation of this Agreement. A subcommittee that will address migration issues shall be created.
The Stabilisation and Association Council may decide to set up other special committees or bodies that can assist it in carrying out its duties. In its rules of procedure, the Stabilisation and Association Council shall determine the composition and duties of such committees or bodies and how they shall function.
A Stabilisation and Association Parliamentary Committee is hereby established. It shall be a forum for Members of the Parliament of Serbia and of the European Parliament to meet and exchange views. It shall meet at intervals that it shall itself determine. The Stabilisation and Association Parliamentary Committee shall consist of members of the European Parliament and of members of the Parliament of Serbia. The Stabilisation and Association Parliamentary Committee shall establish its rules of procedure. The Stabilisation and Association Parliamentary Committee shall be chaired in turn by a member of the European Parliament and by a member of the Parliament of Serbia, in accordance with the provisions to be laid down in its rules of procedure.
Within the scope of this Agreement, each Party undertakes to ensure that natural and legal persons of the other Party have access free of discrimination in relation to its own nationals to the competent courts and administrative organs of the Parties to defend their individual rights and their property rights.
Nothing in this Agreement shall prevent a Party from taking any measures: (a) which it considers necessary to prevent the disclosure of information contrary to its essential security interests; (b) which relate to the production of, or trade in, arms, munitions or war materials or to research, development or production indispensable for defence purposes, provided that such measures do not impair the conditions of competition in respect of products not intended for specifically military purposes; (c) which it considers essential to its own security in the event of serious internal disturbances affecting the maintenance of law and order, in time of war or serious international tension constituting threat of war or in order to carry out obligations it has accepted for the purpose of maintaining peace and international security.
1. In the fields covered by this Agreement and without prejudice to any special provisions contained therein: (a) the arrangements applied by Serbia in respect of the Community shall not give rise to any discrimination between the Member States, their nationals, companies or firms; (b) the arrangements applied by the Community in respect of Serbia shall not give rise to any discrimination between nationals of Serbia as well as between Serbian companies or firms. 2. The provisions of paragraph 1 shall be without prejudice to the right of the Parties to apply the relevant provisions of their fiscal legislation to taxpayers who are not in identical situations as regards their place of residence.
1. The Parties shall take any general or specific measures required to fulfil their obligations under this Agreement. They shall ensure that the objectives set out in this Agreement are attained. 2. The Parties agree to consult promptly through appropriate channels at the request of either Party to discuss any matter concerning the interpretation or implementation of this Agreement and other relevant aspects of the relations between the Parties. 3. Each Party shall refer to the Stabilisation and Association Council any dispute relating to the application or interpretation of this Agreement. In that case, Article 130 and, as the case may be, Protocol 7 shall apply. The Stabilisation and Association Council may settle the dispute by means of a binding decision. 4. If either Party considers that the other Party has failed to fulfil an obligation under this Agreement, it may take appropriate measures. Before so doing, except in cases of special urgency, it shall supply the Stabilisation and Association Council with all relevant information required for a thorough examination of the situation with a view to seeking a solution acceptable to the Parties. In the selection of measures, priority must be given to those which least disturb the functioning of this Agreement. These measures shall be notified immediately to the Stabilisation and Association Council and shall be the subject of consultations if the other Party so requests within the Stabilisation and Association Council, the Stabilisation and Association Committee or any other body set up on the basis of Articles 123 or 124. 5. The provisions of paragraphs 2, 3 and 4 shall in no way affect and are without prejudice to Articles 32, 40, 41, 42, 46 and Protocol 3 (Definition of the concept of originating products and methods of administrative cooperation).
1. When a dispute arises between the Parties concerning the interpretation or the implementation of this Agreement, any Party shall notify to the other Party and the Stabilisation and Association Council a formal request that the matter in dispute be resolved. Where a Party considers that a measure adopted by the other Party, or a failure of the other Party to act, constitutes a breach of its obligations under this Agreement, the formal request that the dispute be resolved shall give the reasons for this opinion and indicate, as the case may be, that the Party may adopt measures as provided for in Article 129, paragraph 4. 2. The Parties shall endeavour to resolve the dispute by entering into good faith consultations within the Stabilisation and Association Council and other bodies as provided in paragraph 3, with the aim of reaching as soon as possible a mutually acceptable solution. 3. The Parties shall provide the Stabilisation and Association Council with all relevant information required for a thorough examination of the situation. As long as the dispute is not resolved, it shall be discussed at every meeting of the Stabilisation and Association Council, unless the arbitration procedure as provided for in Protocol 7 has been initiated. A dispute shall be deemed to be resolved when the Stabilisation and Association Council has taken a binding decision to settle the matter as provided for in Article 129, paragraph 3, or when it has declared that there is no dispute anymore. Consultations on a dispute can also be held at any meeting of the Stabilisation and Association Committee or any other relevant committee or body set up on the basis of Articles 123 or 124, as agreed between the Parties or at the request of any of the Parties. Consultations may also be held in writing. All information disclosed during the consultations shall remain confidential. 4. For matters within the scope of application of Protocol 7, any Party may submit the matter in dispute for settlement through arbitration in accordance with that Protocol, when the Parties have failed to resolve the dispute within two months after the initiation of the dispute settlement procedure in accordance with paragraph 1.
This Agreement shall not, until equivalent rights for individuals and economic operators have been achieved under this Agreement, affect rights ensured to them through existing Agreements binding one or more Member States, on the one hand, and Serbia, on the other.
Annexes I to VII and Protocols 1, 2, 3, 4, 5, 6 and 7 shall form an integral part of this Agreement. The Framework Agreement between the European Community and Serbia and Montenegro on the general principles for the participation of Serbia and Montenegro in Community Programmes, signed on 21 November 2004, and the Annex thereto shall form an integral part of this Agreement. The review provided for in Article 8 of that Framework Agreement shall be carried out within the Stabilisation and Association Council, which shall have the power to amend, if necessary, the Framework Agreement.
This Agreement shall be concluded for an unlimited period. Either Party may denounce this Agreement by notifying the other Party. This Agreement shall terminate six months after the date of such notification. Either Party may suspend this Agreement, with immediate effect, in the event of the non-compliance by the other Party of one of the essential elements of this Agreement.
For the purposes of this Agreement, the term ‘Parties’ shall mean the Community, or its Member States, or the Community and its Member States, in accordance with their respective powers, of the one part, and the Republic of Serbia, of the other part.
This Agreement shall apply, on the one hand, to the territories in which the Treaties establishing the European Community and the European Atomic Energy Community are applied and under the conditions laid down in those Treaties, and to the territory of Serbia on the other. This Agreement shall not apply in Kosovo which is at present under international administration pursuant to United Nations Security Council Resolution 1244 of 10 June 1999. This is without prejudice to the current status of Kosovo or the determination of its final status under that Resolution.
The Secretary-General of the Council of the European Union shall be the depository of this Agreement.
This Agreement shall be drawn up in duplicate in the Bulgarian, Spanish, Czech, Danish, German, Estonian, Greek, English, French, Italian, Latvian, Lithuanian, Hungarian, Maltese, Dutch, Polish, Portuguese, Romanian, Slovak, Slovene, Finnish, Swedish and Serbian languages, each text being equally authentic.
The Parties shall approve this Agreement in accordance with their own procedures. This Agreement shall enter into force on the first day of the second month following the date on which the Parties notify each other that the procedures referred to in the first paragraph have been completed.
Interim Agreement
In the event that, pending the completion of the procedures necessary for the entry into force of this Agreement, the provisions of certain parts of this Agreement, in particular those relating to the free movement of goods as well as the relevant provisions on Transport, are put into effect by means of Interim Agreements between the Community and Serbia, the Parties agree that, in such circumstances for the purpose of the provisions of Title IV, Articles 73, 74 and 75 of this Agreement, Protocols 1, 2, 3, 5, 6 and 7, and relevant provisions of Protocol 4, hereto, the terms ‘date of entry into force of this Agreement’ mean the date of entry into force of the relevant Interim Agreement in relation to obligations contained in the abovementioned provisions.
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.